• ETRI Journal
• /
• 제29권6호
• /
• pp.736-744
• /
• 2007

We propose a fast macroblock (MB) mode prediction and decision algorithm based on temporal correlation for P-slices in the H.264/AVC video standard. There are eight block types for temporal decorrelation, including SKIP mode based on rate-distortion (RD) optimization. This scheme gives rise to exhaustive computations (search) in the coding procedure. To overcome this problem, a thresholding method for fast inter mode decision using a MB tracking scheme to find the most correlated block and RD cost of the correlated block is suggested for early stop of the inter mode determination. We propose a two-step inter mode candidate selection method using statistical analysis. In the first step, a mode is selected based on the mode information of the co-located MB from the previous frame. Then, an adaptive thresholding scheme is applied using the RD cost of the most correlated MB. Secondly, additional candidate modes are considered to determine the best mode of the initial candidate modes that does not satisfy the designed thresholding rule. Comparative analysis shows that a speed-up factor of up to 70.59% is obtained when compared with the full mode search method with a negligible bit increment and a minimal loss of image quality.

• 한국환경보건학회지
• /
• 제32권5호
• /
• pp.499-505
• /
• 2006

Bioventing efficiency was compared in a continuous and an intermittent(6hr injection and 6hr rest) air injection mode. Two lab-scale columns which packed with 5 kg of soil artificially contaminated by diesel oil were operated. The columns were maintained at the $25^{\circ}C{\pm}2.5$ in order to minimize the effect of exterior temperature variation. The flow rate of air injection mode were maintained constantly at the flow rate of 10 ml/min. The moisture of the columns was stably maintained at $60{\sim}80%$ of field capacity. The nutrient compounds were added to make C:N:P ratio as 100:10:l. The continuous and intermittent injection modes showed 67.56% and 69.63% reduction of initial TPH concentration during 90 days, respectively. Two venting modes showed similar results in the analysis of the trends of the hydrocarbon utilizing bacterial counts for operating periods. The carbon dioxide production rate of the continuous injection mode was higher than that of intermittent injection mode. The loss of diesel oil by volatilization in the continuous and intermittent injection modes were about 5% and 1%, respectively. The lower volatilization loss in the intermittent injection mode suggested that the biodegradation of TPH in the intermittent injection mode was greater than that of the continuous mode. These results suggested that the intermittent injection mode is more efficient than the continuous venting mode.

• 전자공학회논문지
• /
• 제51권10호
• /
• pp.154-163
• /
• 2014

본 논문에서는 HEVC를 위한 고속 화면내 부호화 모드 결정 방법을 제안한다. 제안방법은 화면내 부호화의 RMD(Rough Mode Decision) 및 RDO(Rate-Distortion Optimization) 과정에서 고려하는 각 후보 수를 줄여 화면내 부호화 과정에서의 복잡도를 감소시킨다. RMD가 고려하는 후보 수를 줄이기 위하여 영상의 에지 방향성 및 강도를 활용하며, RDO가 고려하는 후보수를 줄이기 위하여 상대적 RMD cost 차이를 이용한다. 실험결과에서는 제안방법이 약 0.79% BD-rate의 부호화 손실만으로 26.81%의 부호화 복잡도를 감소시켰음을 보인다.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.81-86
• /
• 2000

This paper was carried out to investigate the characteristics of interlaminar fracture toughness of foam core sandwich structures under opening loading mode by using the double cantilever beam (DCB) specimens in Carbon/Epoxy and foam core composites. instead of using symmetric geometry of DCB specimen non-symmetric DCB specimen was used to calculate the interlaminar fracture toughness. Three approaches for calculating the energy release rate({{{{ {G }_{IC } }}}}) were compared. Fracture toughness of foam core sandwich structures by autoclave vacuum bagging and hotpress were compared and analyzed. Experiment nonlinear beam bending FEM method were performed. Suggested bonding surface compensation and equivalent area inertia moment was used to calculate the energy release rate in nonlinear analytical results. The conclusions among experimental nonlinear analytical and FEM results was observed. The vacuum bagging method was shown to be able to substitute method in stead of autoclave without serious loss of Mode I energy release rate({{{{ {G }_{IC }}}}}) to be able to substitute method in stead of autoclave without serious loss of Mode I energy release rate({{{{ {G }_{IC }}}}}).

• 대한방사선치료학회지
• /
• 제33권
• /
• pp.25-33
• /
• 2021

목 적 : 본 연구를 통해 호흡동조방사선치료(Respiratory Gated Radiation Therapy, RGRT)시 환자 호흡 속도에 따른 Trigger mode의 정확성과 유용성을 평가하고자 한다. 대상 및 방법 : 호흡 속도에 따른 Trigger mode의 정확성을 평가하기 위해 QUASAR^TM 호흡 움직임 팬텀에 3 mm의 기준 표지자(Fiducial marker, gold marker)를 삽입하여 본원 한달 동안 환자의 평균 호흡인 20 bpm(Breath per minute)을 기준으로 4DCT 촬영 후 정중앙(Median)에 위치한 표지자에 윤곽 묘사(Contouring)를 하였다. OBI(On Board Imager)가 장착된 Truebeam STx^TM를 이용해 방사선조사 구간인 Gating window를 Lower threshold는 2.0 mm로 모든 측정 조건에서 고정시키고, Upper threshold를 최고 위상으로부터 각각 1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm로 바꿔가며 측정하였다. 위와 같은 조건에서 평균 호흡 속도인 20 bpm을 기준으로 10 bpm, 30 bpm, 40 bpm, 50 bpm, 60 bpm 호흡속도를 바꿔가며 방사선이 끊기는 순간인 'Once at beam off'로 5회 촬영하였다. 같은 방법으로 3일간 반복 촬영 후 각 속도 별 오차율을 비교하였다. 결 과 : 기준 호흡 속도 20 bpm에서 최고 위상으로부터 각각 1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm Upper threshold에서 Trigger mode의 beam off시 차이는 3일간의 평균값으로 0.68±0.05 mm, 0.91±0.03 mm, 1.23±0.03 mm, 1.42±0.04 mm, 1.66±0.06 mm이다. 기준 호흡 속도(20 bpm)대비 호흡 속도 변화에 따른 측정 결과는 최대 절대차이(Absolute Difference)의 경우 1일차, 2일차, 3일차 모두 3 mm Upper threshold에서 평균 0.81±0.08 mm로 차이가 확인되었다. 호흡 속도와 절대차이의 편차(Variation)에 대한 상관관계를 평가하기 위한 결정계수 R2는 3일 평균 수치로 각각 0.838, 0.887, 0.770, 0.850, 0.906로 확인되었다. 3일간의 Threshold 모든 변수에서 p-value는 설정 유의수준 0.05 이하로 차이유의를 확인하였다. 결 론 : 호흡동조방사선치료 시 Trigger mode를 이용하여 영상유도를 할 경우 기준 호흡 속도(20 bpm)에서의 Trigger mode의 오차율이 평균 ±0.04 mm 값으로 정확성과 유용성을 확인 할 수 있었다. 그러나 호흡 속도에 따른 부정확성(Uncertainty) 또한 발생할 수 있다는 것을 알 수 있었으며, 특히, 기준 호흡 속도 대비 느려지는 경우(< 20 bpm)보다 빨라지는 경우(> 20 bpm) 영상획득에 대한 부정확성은 커졌다. 따라서 사전 모의치료시의 호흡을 선별하고 호흡을 유지하기 위한 호흡교육과 치료 중 적극적인 실시간 모니터링(Monitoring)이 필요하다고 사료된다.

• 대한기계학회논문집B
• /
• 제25권7호
• /
• pp.923-932
• /
• 2001

A series of experiments were conducted to generate fine liquid(water) drops through the electrohydrodynamic atomization process. The atomization mode depended on flow rate and DC voltage input. For water, having electric conductivity larger than 10(sup)-7S/m, the spindle mode turned out to be the only mode to generate uniform-size drops within the range of 30-450 microns that have wide applications. Within this mode, both the uniformity and the fineness of drops were improved at an optimum voltage input for a given flow rate. This optimum voltage increased with increasing of the liquid flow rate. Another important parameter considered was the nozzle material with different electric conductivity and liquid wettability. A stainless-steel nozzle (the material with high electric conductivity and high liquid wettability) and a silica nozzle (the electrically non-conducting material with low liquid wettability) were tested and compared; and more uniform drops could be obtained with the silica nozzle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.137-142
• /
• 2003

In this study, the propagation behavior of fatigue crack effected hole defects was investigated under mixed-mode I+II loading. To create mixed-mode stress field at crack tip, the compact tension shear (CTS) specimen and loading device were used in this tests. The propagation experiments of fatigue crack were performed by changing of the loading application angle(${\phi}$) and the distance(L) estimated from pre-crack tip to hole center located side by side by side with a pre-crack. As L changes, the variation for propagation aspect of fatigue crack, fatigue life and crack propagation rate were examined under mixed-mode loading. Under mixed-mode loading, the propagation rate of fatigue crack increased while the propagation direction changed dramatically because of the interference of hole defects.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권4호
• /
• pp.387-394
• /
• 2013

As the feature size of integrated circuits continues to decrease, the challenge of achieving an oxidation-free exposed layer after photoresist (PR) stripping is becoming a critical issue for semiconductor device fabrication. In this article, the hydrogen plasma characteristics in direct plasma and the PR stripping rate in remote plasma were studied using a $120{\Phi}$ cylindrical inductively coupled plasma source. E mode, H mode and E-H mode transitions were observed, which were defined by matching the $V_{rms}$ and total impedance. In addition, the dependence of the E-H mode transition on pressure was examined and the corresponding plasma instability regions were identified. The plasma density and electron temperature increased gradually under the same process conditions. In contrast, the PR stripping rate decreased with increasing proportion of $H_2$ gas in mixed $H_2/N_2$ plasma. The decrease in concentration of reactive radicals for the removal of PR with increasing $H_2$ gas flow rate suggests that NH radicals have a dominant effect as the main volatile product.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.51-53
• /
• 2006

This paper proposes a portable ECG monitoring system, which integrates uptodate PDA and RF communication technology. The aim of the study is to acquire the subject's biomedical signal without any constraint. It has two types of transmission mode, which are total signal transmission mode and HR(heart rate)/SC(step count) transmission mode. In audition, wireless communication technology uses Zigbee Wireless PAN and can work in low-power mode, which is one of the advantages of ZiBbee communication technology. The developed system is composed of a transmitter and a receiver. The transmitter has three-axial acceleration sensor. ECG amplifier and Zigbee communication controller. In total signal transmission mode, it can send data 50 packets per second whose transmission speed corresponds to 300 ECG samples and 60 acceleration samples. In HR/SG transmission mode, it can calculate heart rate from EEG data with 216 samples per second and step count from acceleration data and send a packet every cardiac cycle. The receiver forwards the received data to PDA, where the data can be stored and displayed. Therefore, the developed device enables to continuous monitoring for Activities of Daily Living(ADL). Also, this method will reduce medical costs in the aged society.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.43-49
• /
• 2003

The common-rail fuel injection system is becoming a common technology for High Speed Direct Injection(HSDI) diesel engines. The injection timing and rate are important factors for combustion control and pollutants formation mechanisms during engine operation. This paper introduces an estimation methodology of the injection timing and rate of a common-rail injector for HSDI diesel engines. A sliding mode observer that is based on the nonlinear mathematical model of the common-rail injector is designed to overcome the model uncertainties. The injector model and the estimator we verified by relevant injection experiments in an injector test bench. The simulation and the experimental results show that the proposed sliding mode observer can effectively estimate the injection rate of the common-rail injector.