• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.768-775
• /
• 2012

Alginate, obtained from the seaweeds, is a widely used biomaterial for cell transplantation, since its positive effect on viability of capsulized cells and its easier encapsulation capability of living cells. Demineralized bone powder (DBP), derived from the natural bone tissue, is widely applied for clinical trials for its low rate of reaction and antigenicity. A chondrocyte was seeded into an alginate with DBP of different contents, and a microcapsule was produced. The adhesion and proliferation of cells was observed through the MTT analysis, and the PCR was applied to estimate the content of the glycosaminoglycan (sGAG) and collagen, and confirm the specific genetic pattern of the chondrocytes. Also, the alginate microcapsule where the chondrocyte is seeded was extracted after transplantation under the skin of a nude mouse, and was immunochemically stained. The experimental result confirmed that the alginate microcapsule containing 1% of DBP not only showed the highest proliferation of cell but had a positive effect of chondrocytes by the interaction between the alginates and the growth factor in DBP. It can be expected that the microcapsule with application of the alginates and DBP might be an appropriate scaffold for tissue engineering.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.1
• /
• pp.62-72
• /
• 1985

In order to find out the effects of seeding time on growth, dry matter production and nutritive content of Pioneer 931, Pioneer 988 and Piper, this study was carried out on the experimental field of Livestock Experiment Station in 1981-83. Seeding time were 7 with 14-day interval from April 16 to July 9. The results are summarized as follows: 1. It tool about 12 to 13 days from seeding to emergence in case of Mid-April seeding and 7 to 8 days in Late-June. Earlier seeding, more longer growth period from emergence to heading they required. 2. Plant height of Pioneer 931 seeded lately was longer than 4.5 meters in primary growth and Sudangrass was about 2.0 to 2.5 meters. Leaf area was the greatest in Mid-August by early seeding but it was increased until Early-October by late seeding. 3. Sorghum gas brought the highest yield in dry mater and Sudangrass the lowest. In general dry matter yield reduced gradually in response to later seeding but Pioneer 931 has brought more than 10 tons per hecter until Late-June. 4. Relative Growth Rate, Leaf Area Ratio and Leaf Weight of all varieties decreased in accordance with growth development. 5. Crude protein content of leaf was higher than stem and the younger the plants, the more protein they contain. Nitrogen Free Extract was just opposite to crude protein.

• Journal of Korean Society of Forest Science
• /
• v.77 no.4
• /
• pp.453-459
• /
• 1988

The purposes of this study were to evaluate the effects of acid rain on tree growth and on the mycorrhizal formation and the effects of mycorrhizae on the host tolerance to acid rain. Simulated acid rain was applied for five months to Pinus $rigida{\times}taeda$ seedlings in pots inoculated with Pisolithus tinctorius (Pt) and Suillus luteus (Sl). Mycelial inocula of Pt and Sl were either mixed with entire pot soil (Mix) or casted as a band (Band) after soil sterilization. Three pH levels of acid rain (pH 3.0, 4.5 and 6.4 adjusted by 3 : 1 mixture of sulfuric and nitric acids) were tested. Pt-Mix was most effective in growth stimulation and resulted in 45-90% increase in tree height in sandy loam. Pt-Band was less effective than Pt-Mix in growth stimulation and mycorrhizal formation. Simulated acid rain at pH 4.5 stimulated height growth by 10-55%, while acid rain at pH 3.0 did not significantly affect the height growth. The top/root ratio was increased by pH 4.5 treatment, while pH 3.0 treatment reduced it. Mycorrhizal infection rate was not affected by acid rain. Pt inoculation reduced acid-induced leaf injury by 28-58% in both pH 3.0 and 4.5 compared with un-inoculated plants. Sl was also effective in growth enhancement, but was less effective than Pt in both mycorrhizal infection and reducing leaf injury.

• Korean Journal of Food Science and Technology
• /
• v.9 no.2
• /
• pp.144-152
• /
• 1977

The physiochemical properties of eight different cultivars or newly bred lines of glutionous rice were investigated and obtained following results; (1) The gelatinizing temperature, blue value and alkali number of starch separated from the sample cultivars or lines were similar to those of starch from conventional cultivar Olchal. The expansive power of three newly bred lines were somewhat weaker than that of starch from conventional cultivar, but the expansive power of other four lines were similar to that of conventional cultivar. (2) pH of cooked rice of the ten sample cultivars or breeding lines showed no discernible differences rangeing from 6.54 to 6.60. (3) The degree of gelatinization of cooked rice of newly bred lines were rather lower than that of conventional ones, but the degree of their retrogradation were somewhat higher than that of conventional cultivars. (4) In order to improve the palatability of cooked rice of Tongil (common rice), glutinous rice were mixed in different rate. The results showed that a mix ratio of six per cent glutinous rice was most favourable. The acceptability of common Tongil rice was improved when it was cooked with four to six per cent of glutinous rice mixed, and it showed no significant difference from that of Akibare alone cooked rice. Also no difference was noticed among newly bred glutinous lines in the acceptability when they cooked with common Tongil rice mixed. (5) Injolmi, Yaksik, Misitgaru, Twipap and Yugwa were prepared from glutinous rice of sample cultivars and or breeding lines to study their characteristics in processing and their acceptability. The results indicated that the acceptability score of newly bred lines were lower than that of conventional cultivar in cases of Twipap and Yugwa, but in cases of Injolmi, Yaksik and Misitgaru, identical score was obtained from both of newly bred lines and conventional cultivars.

• Journal of Sericultural and Entomological Science
• /
• v.7
• /
• pp.1-26
• /
• 1967

In order to develop the standards for the measurement of drought resistance in mulberry trees (Morus genus) the varietal differences of drought resistance were measured for 30 mulberry varieties, and the relationships between the drought resistance and the histological and physiological characteristics of mulberry leaves were investigated. The results were summarized as follows; 1. It is reasonable to use the drought resistance ratio, expressed by D/D'＊100, for the standard of drought resistance measurement for mulberry tree as a perennial tree crop. Where: D stands for growth amount(shoot length) in the plot of dry treatment, at the end of treatment. D' stands for an expected value of D which is expressed by B＊C/A. Here, A is the growth amount of wet treatment plot at the beginning of treatment, B is the growth amount of dry treatment plot at the beginning of treatment, and C is the growth amount of wet treatment plot at the end of treatment. 2. The results obtained from the application of above formula showed that the varieties Cadaneo, Tahozosaeng, Yongchunchuwu, Kaeryang suban. and Kabsun were highly resistant to drought and the varieties Jukmok, Shipyung, Sobun, Kaeryangzosaeng shipmoonza and Chungagokyo were highly susceptible. 3. Among leaf tissues. the rate of inter-cellular space showed the highest relationship with drought resistance. The correlation coefficient calculated (r=0.4153) was highly significant. Other leaf tissues such as epidermis and palisade showed no significant correlations with drought resistance. 4. The size and density of stomata were correlated to drought resistance. That is: Correlation between drought resistance and size of stomata(length ${\times}$ width)......r= -0. 3253(signif. at 5%) density(No. of stomata/l$\textrm{mm}^2$......r= +0.5047(signif. at 1%)

• The Korean Journal of Mycology
• /
• v.10 no.3
• /
• pp.119-124
• /
• 1982

The characteristics of the six different agricultural soil from Michigan were as follows. Colwood and Capac soil were loam, Gilford and Ceresco were sandy clay loam, Sission was clay loam, and Spinks was sandy loam. pH of Gilford sandy clay loam was 6.6 whereas that of the soil ranged $5.4{\sim}5.9$. Gilford sandy loam found to contain a relatively higher amount of organic matters as compared to other soils. Furthermore, the numbers of bacteria in Gilford sandy clay loam were significantly higher than those in other soils. The populations of fungi in Gilford sandy clay loam and Colwood loam soils were significantly greater than those in other soils. On the other hand, the densities of actinomycetes in Gilford sandy clay loam and Ceresco sandy clay loam soils were significantly different from those in other soils. The population of anaerobic bacteria varied depending on the soils; Ceresco sandy clay loam, Capac loam, Colwood loam soils have higher numbers of bacteria, whereas Gilford sandy clay loam was very lesser than the other soils. In the $^{14}C-glucose$ respiration by soil microorganisms after 10 hrs, the respiration rate was decreasing in the order of Ceresco sandy clay loam, Spinks sandy loam, Colwood loam, Sission clay loam, Capac loam and Gilford sandy clay loam. Germination of test propagules on natural soil soil was $0{\sim}5%$, and it was germinated $90{\sim}98%$ on autoclaved soil and PDA. The propagules differed in thier germination response to nutrients added to the soils. In general, more nutrients were required to promote germination on Capac loam and Gilford sandy loam soil than Spinks sandy loam soil. Especially Mortierella n. sp. required more nutrients for germination to obtain the same ratio as Helminthosporium victoriae.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.739-752
• /
• 2006

Deep-sea surface sediments acquired by multiple corer from 69 stations in the Clarion-Clipperton fracture zone of the northeast equatorial Pacific, were examined to understand the correlation of mass physical properties and sedimen-tological processes. The seabed of the middle part ($8-12^{\circ}N$) of the study area is mainly covered by biogenic siliceous sediment compared with pelagic red clays in the northern part ($16-17^{\circ}N$). In the southern part ($5-6^{\circ}N$), water depth is shallower than carbonate compensation depth (CCD). The mass physical properties such as grain size distribution, mean grain size, water content, specific grain density, wet bulk density, void ratio, and porosity of sediments are distinctly different among the three parts of the study area. Surface sediments in northern part are characterized by fine grain size and low water contents possibly due to low primary productivity and high detrital input. Conversely, sediments in the middle part are characterized by coarse grain size and high water contents, which might be caused by high surface productivity and deeper depth than CCD. The sediments show low water contents and high density in the southern part, which can be explained by shallower depth than CCD. Our results suggest that the variations in mass physical properties of sediments are influenced by combined effects including biogenic primary productivity of surface water, water depth, especially with respect to CCD, sedimentation rate, detrital input, and the geochemistry of the bottom water (for example, formation of authigenic clay minerals and dissolution of biogenic grains).

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.33-40
• /
• 2006

The characteristics of the aluminum waste melting and the distribution of the radioactive nuclides have been investigated for the estimation on the volume reduction and the decontamination of the aluminum wastes from the decommissioning of the TRIGA MARK it and III research reactors at the Korea Atomic Energy Research Institute(KAERI). The aluminum wastes were melted with the use of the fluxes such as flux $A:NaCl-KCl-Na_3AlF_6$, flux B:NaCl-NaF-KF, flux $C:CaF_2$, and flux $D:LiF-KCl-BaCl_2$ in the DC graphite arc furnace. For the assessment of the distribution of the radioactive nuclides during the melting of the aluminum, the aluminum materials were contaminated by the surrogate nuclides such as cobalt(Co), cesium(Cs) and strontium(Sr). The fluidity of aluminum melt was increased with the addition of the fluxes, which has slight difference according to the type of fluxes. The formation of the slag during the aluminum melting added the flux type C and D was larger than that with the flux A and B. The rate of the slag formation linearly increased with increasing the flux concentration. The results of the XRD analysis showed that the surrogate nuclide was transferred to the slag, which can be easily separated from the melt and then they combined with aluminum oxide to form a more stable compound. The distribution ratio of cobalt in ingot to that in slag was more than 40% at all types of fluxes. Since vapor pressures of cesium and strontium were higher than those that of the host metals at the melting temperature, their removal efficiency from the ingot phase to the slag and the dust phase was by up to 98%.

• Journal of the Korea Concrete Institute
• /
• v.26 no.5
• /
• pp.651-660
• /
• 2014

Structural members using ultra high strength concrete which usually used with steel fiber is designed with guidelines based on several investigation of SF-RPC(steel fiber reinforced reactive powder concrete). However, there are not clear design method yet. Especially, SF-RPC member should be casted with steam(90 degree delicious) and members with SF-RPC usually used with precast members. Although the most important design parameter is development method between SF-RPC and steel reinforcement(rebar), there are no clear design method in the SF-RPC member design guidelines. There are many controversial problems on safety and economy. Therefore, in order to make design more optimum safe design, in this study, we investigated bond stress between steel rebar and SF-RPC according to test. Test results were compared with previously suggested analysis method. Test was carried out with direct pull out test using variables of compressive strength of concrete, concrete cover and inclusion ratio of steel fiber. According to test results, bond stress between steel rebar and SF-RPC increased with increase of compressive strength of concrete and concrete cover. Increasing rate of bond stress were decrease with increase of compressive strength of SF-RPC and concrete cover significantly. 1% volume fraction inclusion of steel fiber increase the bond stress between steel rebar and SF-RPC with two times but 2% volume fraction cannot affect the bond stress significantly. There are no exact or empirical equations for evaluation of SF-RPC bond stress. In order to make safe bond design of SF-RPC precast members, previously suggested analysis method for bond stress by Tepfers were evaluated. This method have shown good agreement with test results, especially for steel fiber reinforced RPC.

• Clinical and Experimental Pediatrics
• /
• v.45 no.9
• /
• pp.1134-1140
• /
• 2002

Purpose : Childhood accidents have been increasing recently. Accidents rank as the leading cause of childhood mortality and morbidity. We performed this study to evaluate the causes of childhood accidents. Methods : The authors analysed retrospectively the medical records of 6,410 cases of childhood accidental injuries who visited the emergency room of Asan Medical Center from January 1990 to December 1999. Results : The most common type of accidents was trauma which accounted for 5,038 cases of the total accidents, followed by falls, burns, foreign body aspiration, and poisoning. The most common age of foreign body aspiration was under two years old and the male to female ratio was 2 to 1. The most common site of foreign body aspiration was the esophagus and the stomach, followed by the respiratory tract. In airways, the right and left main bronchus were the most common site for foreign body aspiration and were accompanied by the highest mortality. The most common foreign body in the gastrointestinal tract and respiratory tract were coins and peanuts, respectively. Conclusion : The most common cause of accidents was trauma, followed by falls, burns, foreign body aspiration, and poisoning. The incidence of foreign body aspiration and poisoning is increasing in infants. In cases of foreign bodies in airways, proper management is needed because of the high mortality rate.