• 제목/요약/키워드: rarefied gas dynamics

검색결과 6건 처리시간 0.023초

천이영역의 희박기체 압축성 경계층 해석 (Analysis of rarefied compressible boundary layers in transition regime)

  • 최서원
    • 대한기계학회논문집B
    • /
    • 제21권4호
    • /
    • pp.509-517
    • /
    • 1997
  • Results of flat plate compressible boundary layer calculation, based on discrete formulation of DSMC method, are presented in low Mach number and low Knudsen number range. The free stream is a uniform flow of pure nitrogen at various Mach numbers in low pressures (i.e. rarefied gas). Complete thermal accommodation and diffuse molecular reflections are used as the wall boundary condition, replacing unreal no-slip condition used in continuum calculations. In the discrete formulation of DSMC method, there is no need to use ad hoc assumptions on transport properties like viscosity and thermal conductivity, instead viscosity is calculated from values of other field variables (velocity and shear stress). Also the results are compared with existing self-similar continuum solutions. In all Mach number cases computed, velocity slip is most pronounced in regions near the leading edge where continuum formulation renders the solution singular. As the boundary layer develops further downstream, velocity slips asymptote to values that are between 10 to 20% of the magnitude of free stream velocity. When the free stream number density is reduced, so the gas more rarefied, the velocity slip increases as expected.

DSMC Analysis of Pressure Effect on Low-Density Nozzle Flow

  • Chung, Chan-Hong;Kim, Kyung-Hoe
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제1권2호
    • /
    • pp.1-8
    • /
    • 2000
  • The flow in low-density plumes expanding into a region of finite pressure shows a quite different behavior from that observed in low-density plumes expanding into a vacuum. The flow structure in the plume varies depending on applied ambient and stagnation chamber conditions. In the present study, the direct simulation Monte-Carlo (DSMC) method based on molecular gas dynamics is employed in the analysis of low-density gas flows expanding through a small converging/diverging nozzle. Special attention has been paid to the effect of non-zero ambient and stagnation pressures on the flow structure which has rarely been studied using the DSMC method.

  • PDF

CFD/DSMC 혼합해석기법을 이용한 축대칭 천이영역 유동 해석 (Simulations of Axisymmetric Transition Flow Regimes Using a CFD/DSMC Hybrid Method)

  • 최영재;권오준
    • 한국항공우주학회지
    • /
    • 제47권3호
    • /
    • pp.169-176
    • /
    • 2019
  • 본 연구에서는 희박기체 환경의 유동 정보를 효과적으로 계산하기 위해 CFD 해석기법과 DSMC 해석기법 간 연계 해석을 수행하는 CFD/DSMC 혼합해석기법을 개발하였으며, 개발된 해석기법을 이용하여 천이영역에서의 고속 비행체 주위 유동에 대한 해석을 수행하였다. 해석 형상으로는 콘과 실린더 형태로 이루어진 FRESH-FX 형상으로 고려하였고, 혼합해석기법의 결과는 순수 CFD 및 DSMC 해석 결과와 비교하였다. 천이영역의 대기가 상대적으로 희박하여 초음속 유동에서 발생하는 충격파의 구배 및 세기가 약화된 것을 확인하였다. 순수 CFD 해석 결과와는 차이를 보였고, 순수 DSMC 해석 결과와 거의 일치하는 결과를 도출하는 것을 확인하였다. 또한, 순수 DSMC 계산시간보다 해석 시간이 감소하였다. 이를 통해 혼합해석기법의 결과에 대한 신뢰성 및 해석 시간에서의 효율을 확인하였다.

비정렬 격자 직접모사법을 이용한 희박 유동과 측면 제트의 상호 작용에 관한 연구 (DSMC Calculation of the Hypersonic Free Stream and the Side Jet Flow Using Unstructured Meshes)

  • 김민규;권오준;안창수
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2004년도 춘계 학술대회논문집
    • /
    • pp.126-131
    • /
    • 2004
  • The interaction between the hypersonic free stream and the side jet flow at high altitudes is investigated by direct simulation Monte Carlo(DSMC) method. Since there is a great difference in density between the free stream and the side jet flow, the weighting factor technique which could control the number of simulation particles, is applied to calculate these two flows simultaneously. Chemical reactions are not considered in the calculation. For validation, the corner flow passing between a pair of plates that are perpendicularly attached is solved. The side jet flow is then injected into this comer flow and solution is found for the merged flow. Results are compared with the experiments. For a more realistic rocket model, the flow past a blunted cone cylinder shape is solved. The leeward or windward jet injection is merged with this flow. The effect on the rocket surface is observed at various flow angles. The lambda effect and the wake structure are found like low attitudes. High interaction between the free stream and the side jet flow is observed when the side jet is injected in the windward direction.

  • PDF

Comparative analysis of two methods of laser induced boron isotopes separation

  • K.A., Lyakhov;Lee, H.J.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.407-408
    • /
    • 2011
  • Natural boron consists of two stable isotopes 10B and 11B with natural abundance of 18.8 atom percent of 10B and 81.2 atom percent of 11B. The thermal neutron absorption cross-section for 10B and 11B are 3837 barn and 0.005 barn respectively. 10B enriched specific compounds are used for control rods and as a reactor coolant additives. In this work 2 methods for boron enrichment were analysed: 1) Gas irradiation in static conditions. Dissociation occurs due to multiphoton absorption by specific isotopes in appropriately tuned laser field. IR shifted laser pulses are usually used in combination with increasing the laser intensity also improves selectivity up to some degree. In order to prevent recombination of dissociated molecules BCl3 is mixed with H2S 2) SILARC method. Advantages of this method: a) Gas cooling is helpful to split and shrink boron isotopes absorption bands. In order to achieve better selectivity BCl3 gas has to be substantially rarefied (~0.01%-5%) in mixture with carrier gas. b) Laser intensity is lower than in the first method. Some preliminary calculations of dissociation and recombination with carrier gas molecules energetics for both methods will be demonstrated Boron separation in SILARC method can be represented as multistage process: 1) Mixture of BCl3 with carrier gas is putted in reservoir 2) Gas overcooling due to expansion through Laval nozzle 3) IR multiphoton absorption by gas irradiated by specifically tuned laser field with subsequent gradual gas condensation in outlet chamber It is planned to develop software which includes these stages. This software will rely on the following available software based on quantum molecular dynamics in external quantized field: 1) WavePacket: Each particle is treated semiclassicaly based on Wigner transform method 2) Turbomole: It is based on local density methods like density of functional methods (DFT) and its improvement- coupled clusters approach (CC) to take into account quantum correlation. These models will be used to extract information concerning kinetic coefficients, and their dependence on applied external field. Information on radiative corrections to equation of state induced by laser field which take into account possible phase transition (or crossover?) can be also revealed. This mixed phase equation of state with quantum corrections will be further used in hydrodynamical simulations. Moreover results of these hydrodynamical simulations can be compared with results of CFD calculations. The first reasonable question to ask before starting the CFD simulations is whether turbulent effects are significant or not, and how to model turbulence? The questions of laser beam parameters and outlet chamber geometry which are most optimal to make all gas volume irradiated is also discussed. Relationship between enrichment factor and stagnation pressure and temperature based on experimental data is also reported.

  • PDF

중/고고도 영역에서의 우주발사체 주위 유동에 대한 수치적 연구 (Numerical Investigation of Flows around Space Launch Vehicles at Mid-High Altitudes)

  • 최영재;최재훈;권오준
    • 한국항공우주학회지
    • /
    • 제47권1호
    • /
    • pp.9-16
    • /
    • 2019
  • 본 연구에서는 중/고고도 영역에서 운행되는 우주발사체 주위 유동에 대한 해석을 효율적으로 하기 위해 삼차원 Navier-Stokes 방정식을 해석하는 비 정렬 격자 기반의 맥스웰의 미끄럼 경계조건이 적용된 유동 해석자를 개발하였다. 유동해석자의 검증은 축대칭 형태의 blunted cone-tip 형상에 대한 해석을 통해 수행하였다. 해석 결과는 타 연구자의 실험 및 직접모사법 해석 결과와 비교를 통해 일치하는 결과를 확인하였고, 속도 슬립 및 온도 점프에 대한 예측을 통해 본 유동해석자의 신뢰성을 확보하였다. 검증된 해석자를 이용하여 고도 86km의 중/고고도 영역에서 마하수 6으로 비행하는 우주발사체에 대한 유동 해석을 수행하였으며, 중/고고도 영역에서 나타나는 유동 현상들에 대해 고찰하였다.