• 공업화학
• /
• 제18권4호
• /
• pp.361-365
• /
• 2007

LiCl-KCl 공융염 내 존재하는 몇가지 희토류염화물($Ce/Nd/GdCl_3$)들의 산소와의 반응으로 인한 침전반응에 대한 연구를 수행하였다. 산소와의 반응으로 형성되는 희토류침전물의 형태와 산소분산 시간(최대 420 min) 및 공융염($450{\sim}750^{\circ}C$) 온도가 침전물로의 전환율에 미치는 영향을 규명하였다. 본 연구결과 산소분산 시간 및 공융염의 온도와 무관하게 $NdCl_3$ 및 $GdCl_3$는 옥시염화물(REOCl), $CeCl_3$는 산화물($REO_2$)형태로 침전되었으며 이러한 실험결과는 반응 Gibbs free energy (${\Delta}G_r$) 를 이용한 예측 결과와도 일치하였다. 희토류염화물의 침전물로의 전환특성은 전환율 개념을 도입하여 파악하였다. 전환율은 산소분산 시간이 증가함에 따라서 지수적으로 증가하였으며 $750^{\circ}C$의 공융염 온도 및 300 min 이상의 분산시간 조건에서 0.999 이상의 전환율을 나타내었다. 공융염 온도가 증가함에 따라서 전환율이 증가하였다. Ce의 경우에는 60 min 이상의 산소분산 조건에서 전 실험온도 범위에서 0.999 이상의 일정한 전환율을 나타내었다

• 한국자기학회지
• /
• 제24권6호
• /
• pp.197-201
• /
• 2014

전세계적으로 희소금속의 중요성이 높아지고 있는 가운데 일본은 2004년부터 원소전략 개념을 도입하고 2007년부터는 원소전략사업을 추진하게 되었다. 일본의 문부과학성의 "원소전략 프로젝트"는 물질과 재료를 구성하고 그 기능과 특성을 결정하는 원소의 역할과 성격을 연구하고, 물질과 재료의 기능과 특성의 발현기구를 명확히 규명함으로써, 희소원소나 유해원소를 사용하지 않는 고기능을 가진 물질과 재료를 개발하는 것을 목적으로 하고 있다. 특히, 2010년 9월 일본명 센카쿠렛도(중국명 댜오위다오)에서 중국어선과 일본순시선이 충돌하는 사건이 일어나서, 중국어선을 나포하여 영토문제, 외교, 경제 갈등으로까지 확산되었다. 일본이 국내법을 적용하여 사법처리 하려하자, 중국이 꺼낸 카드가 희소금속의 일본수출금지였다. 이 때부터 위기감을 느낀 일본은 더욱더 원소전략 프로젝트에 박차를 가하기 시작했다. 일본정부는 풍부하고 무해한 원소에 의한 대체재료의 연구, 전략원소의 유효기능의 고활용, 원소유효이용을 위한 실용재료설계기술 등 3가지 제안으로 연구테마를 2012년 2월에 공모하여, 2012년 6월 "원소전략 프로젝트" 연구영역과 연구거점 4군데를 채택하였다. 1. Dy, Nd 등을 대체할 목적의 자성재료영역. 2. Pt, Rh/Li, Co 등을 대체할 목적의 촉매/전지재료영역. 3. In, Ta 등을 대체할 목적의 전자재료영역. 4. Nb, Mo 등을 대체할 목적의 구조재료영역. 본 논문에서는 원소전략의 4개의 영역 중에서 자성재료영역의 현재까지의 연구동향에 대해서 기술하고자 한다.

• 분석과학
• /
• 제20권6호
• /
• pp.468-473
• /
• 2007

중국 황토고원 표층 시료에 대한 원소분포를 조사하였다. 10개 지역의 시료에 대한 주성분의 함량변화는 거의 없으나 3번 시료는 타지역에서 채취한 시료에 비해 Si 및 Fe, P, Na, Ti 의 함량이 낮고 Ca, Mg, LOI의 함량이 높으며 미량원소도 Ba, Cr, Nb, Pb, Rb, Zr, V의 함량이 낮게 나타났다. 대륙지각 상부 원소함량 UCC(Upper Continental Crust)과 비교한 결과 대부분의 원소들이 $0.5-1.5{\times}UCC$ 범위 이내였으나 Ca은 함량이 높게 나타났다. 희토류원소 분석결과 콘드라이트 표준화 시킨 희토류원소의 분포는 모든시료에서 경희토류가 중희토류에 비해 부화되었고 Eu은 부(-)의 이상을 나타내어 황토고원의 표층시료는 유사한 지역으로부터 유입되었고 풍화작용에 크게 영향을 받지 않았음을 알 수 있었다.

• 암석학회지
• /
• 제20권4호
• /
• pp.207-217
• /
• 2011

이 논문에서는 영남육괴 북동부에 위치한 덕구온천지역 주변 우백질 화강암의 주성분조성, 희토류원소를 포함한 미량원소의 함량 그리고 Sm-Nd과 Rb-Sr 동위원소비를 토대로 덕구지역 주변에 분포하는 우백질 화강암의 생성시기, 조구조 환경과 중국대륙과의 연관성에 대해 토의하였다. 희토류원소 분포도는 Eu의 이상과 분포도의 형태에 따라 3종류로 분류되며, $SiO_2$의 함량과도 연관성이 깊다. 이와 같은 특성은 동일기원 마그마내 장석의 분화과정에 의한 것임을 지시해주는 것이다. 영남육괴 북동부의 덕구지역 주변 우백질 화강암의 Rb-Sr 및 Sm-Nd의 등시선 연대는 각각 $1,735{\pm}260Ma$ ($^{87}Sr/^{86}Sr$ 초기치 = $0.702{\pm}0.046,\;2{\sigma}$), $1,785{\pm}180Ma$ ($^{143}Nd/^{144}Nd$ 초기치 = $0.51003{\pm}0.00016,\;2{\sigma}$; ${\varepsilon}_{Nd}(T)=-5.9$)로서, 초기 ${\varepsilon}_{Nd}$ 값은 우백질 화강암의 마그마가 지각 물질로부터 기원되었음을 지시해준다. 특히 초기 $^{143}Nd/^{144}Nd$ 비를 토대로 한 한반도의 선캠브리아기 기반암과 중국내 북중국지괴 혹은 남중국지괴와의 비교에서는, 영남육괴의 선캠브리아기 기반암은 북중국 지과와 유사한 Nd 동위원소 지구화학적 특성을 갖는 기원물질로부터 유래되었음을 지시해준다.

• 자원환경지질
• /
• 제31권2호
• /
• pp.111-125
• /
• 1998

Dispersion, migration and enrichment of environmental toxic elements from the Samkwang Au-Ag mine area were investigated based upon major, minor and rare earth element geochemistry. The Samkwang mine area composed mainly of Precambrian granitic gneiss. The mine had been mined for gold and silver, but closed in 1996. According to the X-ray powder diffraction, mineral composition of stream sediments and soils were partly variable mineralogy, which are composed of quartz, orthoclase, plagioclase, amphibole, muscovite, biotite and chlorite, respectively. Major element variations of the host granitic gneiss, stream sediments and soils of mining and non-mining drainage, indicate that those compositions are decrese $Al_2O_3$, $Fe_2O_3$, MgO, $TiO_2$, $P_2O_5$ and LOI with increasing $SiO_2$ respectively. Average compositional ranges (ppm) of minor and/or environmental toxic elements within those samples are revealed as As=<2-4500, Cd=<1-24, Cu=6-117, Sb=1-29, Pb=17-1377 and Zn=32-938, which are extremely high concentrations of sediments from the mining drainage (As=2006, Cd=l1, Cu=71, Pb=587 and Zn=481 ppm, respectively) than concentrations of the other samples and host granitic gneiss. Major elements (average enrichment index=6.53) in all samples are mostly enriched, excepting $SiO_2$, $Na_2O$ and $K_2O$, normalized by composition of host granitic gneiss. Rare earth element (average enrichment index=2.34) are enriched with the sediments from the mining drainage. Minor and/or environmental toxic elements within all samples on the basis of host rock were strongly enriched of all elements (especially As, Br, Cu, Pb and Zn), excepting Ba, Cr, Rb and Sr. Average enrichment index of trace elements in all samples is 15.55 (sediments of mining drainage=37.33). Potentially toxic elements (As, Cd, Cr, Cu, Ni, Pb, and Zn) of the samples revealed that average enrichment index is 46.10 (sediments of mining drainage=80.20, sediments of nonmining drainage=5.35, sediments of confluent drainage=20.22, subsurface soils of mining drainage=7.97 and subsurface soils of non-mining drainage=4.15). Sediments and soils of highly concentrated toxic elements are contained some pyrite, arsenopyrite, sphalerite, galena and goethite.

• 디지털산업정보학회논문지
• /
• 제9권2호
• /
• pp.55-61
• /
• 2013

A field-programmable gate array (FPGA) is an integrated circuit designed to be configured by a customer or a designer after manufacturing. The FPGA configuration is generally specified using a hardware description language (HDL), similar to that used for an application-specific integrated circuit (ASIC) (circuit diagrams were previously used to specify the configuration, as they were for ASICs, but this is increasingly rare). Contemporary FPGAs have large resources of logic gates and RAM blocks to implement complex digital computations. In this paper, we implement a system of digital instrumentation using FPGA. This system consists of the trigger part, memory address controller part, control FSM part, Encoder part, LCD controller part. The hardware implement using FPGA and the verification of the operation is done in a PC simulation. The proposed hardware was mapped into Cyclone III EP2C5Q208 from Altera and used 1,700(40%) of Logic Element (LE). The implemented circuit used 24,576-bit memory element with 6-bit input signal. The result from implementing in hardware (FPGA) could operate stably in 140MHz.

• Journal of Korean Neurosurgical Society
• /
• 제50권1호
• /
• pp.54-56
• /
• 2011

Ankylosing spondylitis (AS) is frequently associated with inflammatory lesions of the spine and continuous fatigue stress fractures; however, an association with an intraspinal synovial cyst has not been previously reported. A 55-year-old man with a five year history of AS who presented with back pain and a right radiculopathy was admitted to the hospital. Five years previously, he underwent a percutaneous vertebroplasty for an osteoporotic L1 compression fracture, and was diagnosed with AS at that time. Plain radiographs showed aggravated kyphosis and a stress fracture through the ossified posterior element, below the prior vertebroplasty. Magnetic resonance images revealed a right foraminal cystic lesion at the L2-L3 level with effacement of the nerve root. A 1.6 cm cystic lesion that appeared to arise from the L2-L3 facet joint without direct communication was excised from the L2-L3 foramen. Pathological examination confirmed synovial cyst. The patient's symptoms resolved immediately after surgery except for a mild dysesthesia of the right leg. We report herein a rare case of foraminal synovial cyst associated with AS accompanying posterior element fracture with a review of literature.

• 대한치과보철학회지
• /
• 제34권4호
• /
• pp.780-790
• /
• 1996

The endodontically treated tooth is generally restored with post and core, owing to the brittleness and the loss of large amount of tooth structure. Although there have been lots of studies about the endodontically treated teeth, the three-dimensional quantitative studies about the stress distribution of them are in rare cases. In this study, it was assumed that the coronal portion of the upper incisor had extensively damaged. After the root canal therapy it was post cored, and restored with PFG crown. The three-dimensional model, in which the root was supported with a normal alveolar bone, was constructed. Force was applied to the centric stop point with the angle of 135 degrees to the long axis of the tooth. Force was assumed to be 250N as functional maximum bite force of upper central incisors. The results analyzed with three-dimensional finite element method were as follows : 1. Stress was concentrated on the middle portion of the labial side dentin and the apical portion of the dentin. 2. Stress in the post was more concentrated on the post apex. 3. The displacement of the post at the post-cement interface was almost symmetrical la-bio-lingually. 4. It assumed that restoring extensively damaged tooth with a post-core and PFG crown is an adequate method of restoration.

• 한국주조공학회지
• /
• 제32권6호
• /
• pp.261-268
• /
• 2012

The effects of thickness, base element and additive to inoculant on the number of eutectic cells and chill depth of thin-section gray cast iron were investigated. Meanwhile the number of eutectic cells increased by inoculation, chill depth decreased. The former decreased and the latter increased by holding the melt at the temperature range between 1,450 and $1,500^{\circ}C$. The former was more for the thinner casting with the thickness of 5 mm than the other. The result of thermal analysis coincided well with the change of macrostructure. The former increased and the latter decreased with the increased contents of carbon, silicon and the silicon content by inoculation. The former decreased and the latter increased with increased manganese content. The number of eutectic cells decreased as the amounts of rare earth and the bismuth added to this inoculant increased. With the addition of sulfur of 0.10 wt% of the weight of this inoculant, the maximum number of eutectic cells was obtained.

• Advances in materials Research
• /
• 제4권4호
• /
• pp.227-233
• /
• 2015

We present a method, supported by theoretical analysis, for optimizing the usage of the critical rare earth element dysprosium in $Nd_2Fe_{14}B$ (NdFeB)-based permanent magnets. In this method, we use Dy selectively in locations such as magnet edges and faces, where demagnetization factors are largest, rather than uniformly throughout the bulk sample. A200 nm thick Dy film was sputtered onto a commercial N-38, NdFeB magnets with a thickness of 3 mm and post-annealed at temperatures from $600-700^{\circ}C$. Magnets displayed enhanced coercivities after post-annealing and as much as a 5 % increase in the energy product, while requiring a total Dy content of 0.06 wt. % - a small fraction of that used in the commercial grade Dy-NdFeB magnets. By assuming all Dy diffused into NdFeB magnets, the improvement in energy product corresponds to a saving of over 1% Dy (critical element). Magnets manufactured using this technique will therefore be higher performing which would potentially broaden the application space of these magnets in the traction motors of hybrid and pure electric vehicles, and wind generators.