• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.232-237
• /
• 1989

The elution mechanism of rare earth elements in cation exchange resin which was substituted with $NH_4^+,\;Zn^{2+}\;or\;Al^{3+}$ as a retaining ion had been investigated. Rare earths or rare earths-EDTA complex solution was loaded on the top of resin bed and eluted with 0.0269M EDTA solution. When the rare earth-EDTA complex was adsorbed on the $Zn^{2+}\;or\;Al^{3+}$ resin form, retaining ion was complexed with EDTA and liberated rare earths was adsorbed in the resin again. Adsorbed rare earths in resin phase could be eluted by the complexation reaction with EDTA eluent. On $NH_4^+$ resin form, the rare earth-EDTA complex which had negative charge could not adsorbed on the cation exchange resin because the complexation reaction between $NH_4^+$ and EDTA was impossible. So the elution time was much shorter than in $Zn^{2+}\;or\;Al^{3+}$ resin form. When the rare earths solution was loaded on the $Zn^{2+},\;Al^{3+}$ resin form bed, rare earths was adsorbed in the resin and the retaining ion was liberated. Adsorbed rare earths in resin bed was exchanged by EDTA eluent forming rare earths-EDTA complex, and eluted through these processes. On $NH_4^+$ resin form, rare earths loaded was adsorbed by exchange reaction with $NH_4^+$. As the EDTA eluent was added, rare earths was liberated from resin forming negatively charged rare earth-EDTA complex and eluted without any exchange reaction. So the elution time was greatly shortened and there was no metallic ion except rare earths in effluent. When the $Zn^{2+}\;and\;Al^{3+}$ was used as retaining ion, the pH of efflent was decreased seriousely because the $H^+$ liberated from EDTA molecule.

• Journal of Powder Materials
• /
• v.30 no.2
• /
• pp.101-106
• /
• 2023

Liquid metal extraction (LME), a pyrometallurgical recycling method, is popular owing to its negligible environmental impact. LME mainly targets rare-earth permanent magnets having several rare-earth elements. Mg is used as a solvent metal for LME because of its selective and eminent reactivity with rare-earth elements in magnets. Several studies concerning the formation of Dy-Fe intermetallic compounds and their effects on LME using Mg exist. However, methods for reducing these compounds are unavailable. Fe reacts more strongly with B than with Dy; B addition can be a reducing method for Dy-Fe intermetallic compounds owing to the formation of Fe₂B, which takes Fe from Dy-Fe intermetallic compounds. The FeB alloy is an adequate additive for the decomposition of Fe₂B. To accomplish the former process, Mg must convey B to a permanent magnet during the decomposition of the FeB alloy. Here, the effect of Mg on the transfer of B from FeB to permanent magnet is observed through microstructural and phase analyses. Through microstructural and phase analysis, it is confirmed that FeB is converted to Fe₂B upon B transfer, owing to Mg. Finally, the transfer effect of Mg is confirmed, and the possibility of reducing Dy-Fe intermetallic compounds during LME is suggested.

• Journal of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.239-244
• /
• 1980

An anion exchange method for separating the individual rare earth elements in monazite into enriched fractions has been developed. The complexed rare earth ions with EDTA at pH 8.4 pass through the anion resin bed. The absorption order of the complexed ions was in accord with that of the stability constants of the complexes. The elution of a mixture of all the rare earths through an ion-exchange bed with an ammonia-buffered solution of EDTA indicated that this chelating agent is as effective for separating the light rare earths. The separation results of each ion obtained from their elution fractions are 55% to 98%.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.18-25
• /
• 2019

In order to recover the cerium contained in the spent nickel metal hydride batteries (NiMH battery), the recovered rare earth complex precipitates from NIMH were converted into rare earth hydroxides through ion exchange reaction to react with NaOH aqueous solution at a reaction temperature of 70 ℃, for 4 hours. Rare earth hydroxides were oxidized by injecting air at 80 ℃ for 4 hours to oxidize Ce³⁺ to Ce⁴⁺. The oxidation rate of cerium was confirmed to be about 25 % through XPS, and the oxidized powder was separated from the rest of the rare earth using the difference in solubility in dilute sulfuric acid. The finally recovered powder has a crystal phase of cerium hydroxide (Ce(OH)₄). The cerium purity of the final product was about 94.6 %, and the recovery rate was 97.3 %.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.360-364
• /
• 2016

The rare earth output is concentrated in limited number of countries including China. Also the necessity for development of non-rare earth motor is getting signified due to the rapid increase of rare earth price and resource weaponizing policies. Non-rare earth motor is generally designed as spoke type PMSM (Permanent Magnet Synchronous Motor) in order to maximize the power density. Such spoke type PMSM has advantage in concentrating the flux but demonstrates lower efficiency compared to permanent magnet using Nd (Neodymium) permanent magnet. Therefore, applications with strong necessity for efficiency need rotor structure having improved efficiency compared to spoke type PMSM. Hence, this study suggested fan-shape type PMSM with somewhat lower power density but maximized efficiency. Fan-shape type PMSM is a rotor shape demonstrating outstanding reduction of iron loss compared to existing spoke type. Thus, this study analyzed the improvement of efficiency and reduction of loss arising from the suggested shape through parameter calculation.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.4106-4113
• /
• 2021

Rare earth doped barium tellurite glasses were synthesised and explored for their radiation shielding applications. All the samples showed good thermal stability with values varying between 101 ℃ and 135 ℃ based on dopants. Structural properties showed the dominance of matrix elements compared to rare earth dopants in forming the bridging and non-bridging atoms in the network. Bandgap values varied between 3.30 and 4.05 eV which was found to be monotonic with respective rare earth dopants indicating their modification effect in the network. Various radiation shielding parameters like linear attenuation coefficient, mean free path and half value layer were calculated and each showed the effect of doping. For all samples, LAC values decreased with increase in energy and is attributed to photoelectric mechanism. Thulium doped glasses showed the highest value of 1.18 cm^-1 at 0.245 MeV for 2 mol.% doping, which decreased in the order of erbium, holmium and the base barium tellurite glass, while half value layer and mean free paths showed an opposite trend with least value for 2 mol.% thulium indicating that thulium doped samples are better attenuators compared to undoped and other rare earth doped samples. Studies indicate an increased level of thulium doping in barium tellurite glasses can lead to efficient shielding materials for high energy radiation.

• Journal of Powder Materials
• /
• v.25 no.2
• /
• pp.165-169
• /
• 2018

Rare earth elements (REEs) are considered to be vital to modern industry due to their important roles in applications such as permanent magnets, automobile production, displays, and many more. The imbalance between demand and supply of REEs can be solved by recycling processes. Regarding the needs of industry and society, the International Organization for Standardization, Technical Committee 298 (ISO/TC298) Rare Earths has been recently launched for developing international standards on rare earth elements. In accordance with the suggestion of its constituents, it is tentatively working to develop the appropriate standards under five working groups (WG) on terms and definitions (WG1), element recycling (WG2), environmental stewardship (WG3), packaging, labelling, marking, transport, and storage (WG4), and testing analysis (WG5). The scope and structure of ISO/TC298 on the topic of rare earths is discussed in this document.

• Journal of the Korean earth science society
• /
• v.42 no.4
• /
• pp.383-389
• /
• 2021

Several studies investigating the behavior and environmental distribution of rare earth elements (REEs) have been reviewed to determine the geochemical processes that may affect their concentrations and fractionation patterns in groundwater and whether these elements can be used as tracers for groundwater-rock interactions and groundwater flow paths in small catchments. Inductively coupled plasma-mass spectrometry (ICP-MS), equipped with an ultrasonic nebulizer and active-film multiplier detector, is routinely used as an analytical technique to measure REEs in groundwater, facilitating the analysis of dissolved REE geochemistry. This review focuses on the distribution of REEs in groundwater and their application as tracers for groundwater geochemistry. Our review of existing literature suggests that REEs in ice cores can be used as effective tracers for atmospheric particles, aiding the identification of source regions.

• Journal of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.304-308
• /
• 1989

The spectrophotometric determination of $Lu^{3+},\;Eu^{3+}$ and some other rare earths have been investigated using Methyl Thymol Blue(MTB) as spectrophotometric reagent. Rare earth elements form a stable complex with MTB abount pH 6.5 and the ratio of its complex is 1 to 1. MTB has a absorption maxima at 440nm and rare earth MTB complex has absorption maxima 610nm at pH 6.5, respectively. The absorbance of the rare earth MTB complex is stable in 7 hours after color developing and obey the Beer law in the range of $0{\sim}110{\mu}g/50ml$. The ligand such as phosphate, citrate and EDTA decrease the absorbance of its complex considerably, and this method has a poor selectivity of each rare earth element and the molar absorptivity is $1.2{\sim}2.0{\times}10^4mol^{-1}{\cdot}l{\cdot}cm^{-1}$. In methyl alcohol, ethyl alcohol and acetone medium we did not find out any absorption change of the rare earth MTB complex.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2013

The rare earth oxide wastes consisting of major 8 nuclides Y, La, Ce, Pr, Nd, Sm, Eu and Gd, are generated during the salt waste treatment of PyroGreen process. The final form of the rare earth is generated as the oxide state. In this study, six candidate glasses were developed to evaluate the feasibility for vitrifying the rare earth oxide wastes within the borosilicate glass system. The solubilities of the mixture of the rare earth oxide waste showed less than 25wt% at $1,200^{\circ}C$, less than 30wt% at $1,300^{\circ}C$, respectively. It means that solubility is increased with the temperature increment. The liquidus temperature of the homogeneous glass with 20wt% waste loading was determined as less than $950^{\circ}C$. In more than solubility of rare earth oxides glass, formation of rare earth-oxide-silicate crystal in glass-ceramic occurred as the secondary phase. As their viscosity at melting temperature $1,200{\sim}1,300^{\circ}C$ was less than 100 poise, electrical conductivity was higher than 1 S/cm, 20~25wt% waste loading glasses with good surface homogeneity are judged to have good operability in cold crucible induction melter. Other physicochemical properties of the developed glasses are going to be experimented in the future.