• Geomechanics and Engineering
• /
• v.34 no.1
• /
• pp.69-86
• /
• 2023

To overcome the dilemma of the [BQ] method's inability to predict mountain tunnel support loads, this study is based on the Hoek-Brown criterion and previous results to obtain the connection equations from GSI scores to each parameter of the Hoek-Brown criterion and the link between the [BQ] scores and the GSI system. The equations were embedded in the Hoek-Brown criterion of FLAC6.0 software to obtain tunnel construction forecasts without destroying the in-situ stratigraphy. The feasibility of the secondary development of the Hoek-Brown criterion was verified through comparative analysis with field engineering measurements. If GSI > 45 with a confining pressure of less than 10 MPa, GSI has little effect on the critical softening factor while we should pay attention to the parameter of confining pressure when GSI < 45. The design values for each parameter are closer to the FLAC3D simulation results and the secondary development of the Hoek-Brown criterion meets the design objectives. If the Class V surrounding rock is thinned with shotcrete or the secondary lining is installed earlier, the secondary lining may act as the main load-bearing structure. The study may provide ideas for rapid prediction of mountainous tunnels in China.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.399-404
• /
• 2008

The objective of this study is to develop the predicting method of concrete strength when remove concrete form-work without making cement test piece at construction site. For this purpose, this study catches the Maturity Method by using RFID, the usability of which is now being emphasized at site, accumulates and record the strength data, which can be gained with the results of existing Maturity Method method that is accompanied with strength estimation study, in database, and finally proposes the system structure which can check the estimated strength by Maturity Method. The merits of this method by using of Maturity Method are as follows; More objective, precise, and rapid decision can be made to the concrete strength and about the maintaining period of concrete form and form support. More efficient control of integrated material management system can be possible. Architectural field example using RFID can be suggested more concretely. RFID applicability can be extended by using DB of material integration management system.

• Journal of Intelligence and Information Systems
• /
• v.14 no.1
• /
• pp.47-66
• /
• 2008

This study is aimed at proposing a new type of ubiquitous decision support system (u-DSS) portal which is embedded with two important mechanisms like an intelligent ontology management module (i-OMM) and multi-agent coordination mechanism (MACM). The proposed portal provides timely decision support to the involved decision entities (represented as agents) by taking advantage of the two mechanisms embedded on the portal. The most important virtue of the proposed portal is that it can resolve two problems such as semantic discordance and data confliction which are occurring very often in an ubiquitous computing environment. Frequent requests of revising the already established decision information due to the rapid changes in decision entities' requirements require the extremely flexible and intelligent u-DSS vehicle like theproposed mechanism. In this sense, the i-OMM is designed to provide support to solving the semantic discordance in the way that the i-OMM virtually integrates ontology view (IOV) to integrate heterogeneous ontology among the agents engaged inubiquitous commerce situations. Then the i-OMM sends the IOV to the MACM to resolve the conflicts among the involved agents. The proposed u-DSS portal was applied to the u-fulfillment problem in which all the involved decisionagents need their own requirements to be satisfied seamlessly and timely. The experimental results show that the proposed u-DSS portal is very robust and promising in the field of u-DSS and context modeling.

• Journal of Multimedia Information System
• /
• v.6 no.1
• /
• pp.1-6
• /
• 2019

In the field of industrial applications, the real-time performance of the target detection problem is very important. The most serious time consumption in the pedestrian detection process is the extraction phase of the candidate window. To accelerate the speed, in this paper, a fast extraction of pedestrian candidate window based on the BING (Binarized Normed Gradients) algorithm replaces the traditional sliding window scanning. The BING features are extracted with the positive and negative samples and input into the two-stage SVM (Support Vector Machine) classifier for training. The obtained BING template may include a pedestrian candidate window. The trained template is loaded during detection, and the extracted candidate windows are input into the classifier. The experimental results show that the proposed method can extract fewer candidate window and has a higher recall rate with more rapid speed than the traditional sliding window detection method, so the method improves the detection speed while maintaining the detection accuracy. In addition, the real-time requirement is satisfied.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.616-621
• /
• 2003

Fluid-elastic instability is believed to be a cause of the large-amplitude vibration and resulting rapid wear of heat exchanger tubes when the flow velocity exceeds a critical value. For sub-critical flow velocities, the random turbulence excitation is the main mechanism to be considered in predicting the long-term wear of steam generator tubes. Since flow-induced interactions of the tubes with tube supports in the sub-critical flow velocity can cause a localized tube wear, tube movement in the clearance between the tube and tube support as well as the normal contact force on the tubes by fluid should be maintained as low as possible. A simplified method is used for predicting fretting-wear damage of the double $90^{\circ}$U-bend tubes. The approach employed is based on the straight single-span tube analytical model proposed by Connors, the linear structural dynamic theory of Appendix N-1300 to ASME Section III and the Archard's equation for adhesive wear. Results from the presented method show a similar trend compared with the field data. This method can be utilized to predict the fretting-wear of the double $90^{\circ}$U-bend tubes in steam generators.

• The Journal of Engineering Geology
• /
• v.24 no.3
• /
• pp.343-351
• /
• 2014

Tunnel face mapping plays an important role in risk analysis and infrastructure support decisions during tunnel construction. In this study, a digital mapping system using a mobile device is employed instead of existing face-mapping methods that rely upon face mapping sheets. The mobile device is then connected to the main server in the field, where a tunnel-specific database is compiled automatically. This information provides real-time feedback on the tunnel face to construction personnel and engineers, thus allowing for rapid assessment of tunnel face stability and infrastructure needs. The Douglas-Peucker algorithm, among others, is employed to resolve problems arising from the detailed mapping and speed problem by data accumulation. This system is expected to raise program optimization through field verification and additional functional improvements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.312-320
• /
• 2020

3D scanning began in the field of manufacturing. In the construction field, a BIM (Building Information Modeling)-based 3D modeling environment was developed and used for the overall construction, such as factory prefabrication, structure construction inspection, plant facility, bridge, tunnel structure inspection using 3D scanning technology. LiDARs have higher accuracy and density than mobile scanners but require longer registration times and data processing. On the other hand, in interior building space management, relatively high accuracy is not needed, and the user can conveniently move with a mobile scan system. This study derives considerations for the development of Simultaneous Localization and Mapping (SLAM)-based Scan Backpack systems that move freely and support real-time point cloud registration. This paper proposes the mobile scan system, framework, and component structure to derive the considerations and improve scan productivity. Prototype development was carried out in two stages, SLAM and ScanBackpack, to derive the considerations and analyze the results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.647-654
• /
• 2016

In the defense industry, national security takes priority over economic sense and this has translated into high cost and long-term research and development. However, the exponential growth of technology and rapid changes in the security situation in recent years have resulted in a call for the development of systems at a low cost within a short period of time. In order to implement a modularization strategy in the field of defense, the introduction of line replaceable units in OO systems needs to be prioritized. This study selects six criteria following a literature review and prioritizes 11 modules for OO systems using the project evaluation method, Grey Relational Analysis (GRA). Based on the GRA results, the grey relational grades were derived as 0.83, 0.81 and 0.80 for the M11 (Main board), M8 (EMI module), M3 (Single board computer) modules, respectively. The cost and time of development is expected to be reduced in accordance with the grey relational grade. The results of this research could be utilized for decision making on adopting modularization in similar system development or product improvement programs (PIPs).

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.279-286
• /
• 2007

The competitiveness of a corporate has always been an endeavor factor in the field of Business Management and with introduction of computer, various system; Decision Support System. Executive Information System. Management Information System has dramatically improved the competitiveness. According to the environmental change, organizational complexity. rapid information technology development. it is accelerated to introduce the Enterprise Resource Planning(ERP) System. ERP System is considered as an important tool for management innovation. Korean enterprises have been adopting ERP to reinforce competitive power and to realize global standardization in recent years. This study on the performance of ERP Systems is designed to take a look at the importance, outcome factors of information system, the quality measurement of the information system, and breaking the quality of the information system into system quality, information quality.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.39-46
• /
• 2009

The purpose of this study is to compare and analyze the organizations for responses in disaster fields to cope with large-scaled disasters including Emergency Management Agency, Emergency Response Unit, Emergency Support Center, and Field Command Center (Field Command Office). According to the results of the analysis, the problems of the organizations for responses in local disaster fields are; 1) the scopes of roles among the organizations for responses in disaster fields are ambiguous, 2) the structures of the organizations for responses in disasters are different each other, 3) the integrated management functions among the organizations for responses in disasters are overlapped, and 4) the one who assumes the integrated command is not defined. In order to improve the problems, first, the range of working of each organization for responses in local disaster fields should be definitely established and an agreement in services among the organizations should be settled in advance. Second, similar designs in the structure among the organizations for responses in disasters are necessary for amicable communication. Third, the works for integration and management for each organization for responses should be apportioned. Fourth, the organization in charge and the one who assumes the integrated command for each type of disasters should be appointed in advance for rapid decision-making.