• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.390-399
• /
• 2014

The objective of this study was to establish a processing technology for preserved leaves based on the results from the examination of the optimal period and condition for dye-absorbing treatment for Eucalyptus cinerea F. Mull. ex Benth. (silver dollar eucalyptus) being used frequently as plant material for flower design. Cut foliages of E. cinerea with uniformly matured leaves were cut into 20 cm lengths and their lower stem parts were placed in dye solution in growth chambers with different temperatures (10, 20, 30, and $40^{\circ}C$), vapor pressure deficits (VPD; 0.23, 0.70, 1.17, and 1.61 kPa), and photoperiods (0, 6, 12, 24 hours) for 3, 6, 9, and 12 days, and then dried in a room of $20^{\circ}C$ for three days. Lower temperature during preserving dye treatment reduced the changes in leaf color compared with fresh leaves and decreased ${\Delta}E$ value. Especially, high temperature increased red degree (a) and decreased yellow degree (b) due to browning. Lower VPD reduced the change in leaf color compared with fresh leaves and decreased ${\Delta}E$ value. Shorter photoperiod reduced the change in leaf color compared with fresh leaves and decreased ${\Delta}E$ value. The ${\Delta}E$ value increased with increasing absorbing duration under three environmental conditions. The flexibility of stem and leaves after dipped into preserving dye solution and dried for 3 days increased with decreasing temperature, VPD and dipping duration. Therefore, the optimal environment condition for dye treatment was 0.23-0.70 kPa VPD at $10-20^{\circ}C$ in the darkness, and the optimal and economical duration was 3 days. These conditions reduced the speed of water loss by decreasing transpiration, so yellowing or browning by rapid water loss deteriorated the quality of preserved leaves out of these ranges.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.1
• /
• pp.1-12
• /
• 2018

This study sought to analyze changes in the vegetation structure and species diversity indices in the Abies koreana forest in the Yeongsil area of Hallasan Mountain and establish basic data for Long-Term Ecological Research (LTER). The results show that the number of woody plants per 1ha has increased by 804 (45.1%) from 1,781 to 2,585 individual plants, whereas the number of live A. koreana did not change much with 796 individual plants. The number of dead tree plants, however, jumped by 807 (82.2%) from 982 to 1,789 plants. With other tree species, the number of live individual plants increased by 807 (82.2%) from 982 to 1,789 plants, whereas the number of dead plants increased by 31 from 10 to 41 individual plants. Results of the average importance index analysis show that the number of A. koreana decreased, while the number of Weigela subsessilis, Rhododendron yedoense for. poukhanense, and Magnolia sieboldii increased. The species diversity index increased by 6.7% as per the maximum level in the upper layer and by 7.2% in the lower layer, respectively. Results of the stem morphology analysis show that the number of AS type was highest with 700 individual plants among A. koreana, while their distribution by type shifted from AS>AL>DS>DB to AS>DS>AL>DB. As for other species, the AS type was most abundant with 1,580 individual plants, while their distribution by type shifted from AL>AS>AF>AB to AS>AL>AB>AD. The number of newly sprouted tree plants has increased from 420 in 2014 to 453 in 2016. Of the individual plants that were alive in 2014, 23 were found dead and 33 individual plants younger than 3 years old have been newly added to the group. The number of deaths after 2014 was highest among the 2 years olds, whereas the number of 2 years olds that sprouted in 2014 was highest among the newly sprouted tree plant group. In the A. koreana forest in Yeongsil, the density of other species was rising rapidly with the exception of the dead and live A. koreana. The occurrence of new tree plants is decreasing rapidly, thereby confirming the rapid change in the area's vegetation structure. Therefore, there is a need for continuous long-term ecological research to monitor vegetation change. It can also be used as a basic data for efficient restoration research.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.5
• /
• pp.119-134
• /
• 2018

Today, many firms face the environment of high uncertainty and severe competition due to the rapid technology development and the diverse needs of customers. In the business environment, one of the most important ways to gain sustainable competitive advantage and future growth engine is related to NPD (New Product Development), which is a very important issue for practice and academia. Thus, this study intends to provide new values to practitioners and researchers related to NPD by analyzing current research trends and future trends in NPD field. For this, we bibliometrically analyzed keyword networks which consist of keywords that were already published in the eminent journals from Scopus database to generate insights that have not been captured in the previous reviews on the topic. As a result, we could understand the extant research streams in NPD field, and suggest the changes of specific research topics based on the connected relationships among keywords over the time. In addition, we also foresaw the general future research trends in NPD field based on the keywords according to preferential attachment processes. Through this study, it was confirmed that NPD keyword network is a small world network that follows the distribution of power law and the growth of network is formed by link formation by keyword preferential attachment. In addition, through component analysis and centrality analysis, keywords such as Innovation, New product innovation, Risk management, Concurrent engineering, Research and development, and Product life cycle management are highly centralized in NPD keyword network. On the other hand, as a result of examining the change of preferential attachment of keywords over the time, we suggested the required new research direction including i) NPD collaboration with suppliers, ii) NPD considering market uncertainty, iii) NPD considering convergence with the other academic areas like technology management and knowledge management, iv) NPD from SME(Small and medium enterprises) perspective. The results of this study can be used to determine the research trends of NPD and the new research themes for interdisciplinary studies with other disciplines.

• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.786-794
• /
• 2011

To investigate the sanitary-quality level of commercial kimchi in South Korea, the pH, acidity, and microbial-flora changes in the kimchi were determined. Samples of kimchi produced by three different manufacturers (a small grocery store, a small/medium-sized enterprise, and a large food company) were collected. Freshly made kimchi was purchased and fermented at $10^{\circ}C$ for 10 days. The pH of the commercial kimchi on the purchased day was approximately pH 5.8, and that on the $10^{th}$ day of fermentation was ${\simeq}pH$ 4.1. The kimchi purchased from a large company showed a more rapid decline in pH level during fermentation. The saltiness of the kimchi purchased from a medium-sized company was slightly higher than those of the other commercial kimchi samples. The saccharinity index of the kimchi produced by a small grocery store was higher than those of the other samples, and its value deviation was also higher than those of the other commercial kimchi samples. A higher total viable-cell count and a higher lactic-acid bacteria (LAB) count were detected in the kimchi from the large food company at the beginning of fermentation compared to the samples of the two other kimchi manufacturers. The highest cell numbers of gram-positive bacteria (except LAB) and coliform bacteria were detected from the small-grocery-store kimchi, but the coliform bacteria count gradually decreased during fermentation although such bacteria were still detected until the $10^{th}$ day of fermentation. In contrast, coliform bacteria were not detected in the samples from the medium-sized and large food companies. Yeast, which is detected in over-ripened kimchi, was detected in the unfermented kimchi from the small grocery store, which had a below-0.36% acidity level. The gram-positive bacteria (except LAB) that were detected in all the tested commercial kimchi samples were determined to be Bacillus spp., and the gram-negative bacteria were determined to be Escherichia coli, Enterobacter spp., Sphingomonase spp., and Strenophomonas spp. The proportions of all the aforementioned bacteria in the kimchi samples, however, were different depending on the samples that were taken. These results indicate that a more sanitary kimchi production process and a more systematic kimchi production manual should be developed to industrialize and globalize kimchi.

• Korean Journal of Plant Resources
• /
• v.27 no.4
• /
• pp.380-391
• /
• 2014

Plants as well as crops are damaged by a combination of the hot and dry winds that has been a major factor in the reduction of crop production. A means to protect them from damaging conditions is to consider a coating material. In this study, we established laboratory screening methods to find a coating material to protect a crop from rapid transpiration caused by various factors. In a test measuring the weight loss of kidney bean seedlings for 6 days, Avion treatments decreased its weight loss (P=0.05). Owing to long-time spend in completing this assay, we performed a more simple method using a cobalt chloride paper strip, which changes from blue to red colors under water condition. Beewax, guagum, paraffin liquid, soybean oil, and PE-635 gave a waterproofing effect above 37 and 43% at 0.5 and 1 h after treatment, respectively. However, these tested materials did not show significant waterproofing results at 2 h. Although the methods produced reasonable results, a screening method to obtain more objective data is needed. An alternative is to use an instrument that can detect the transpiration of crop leaves. In a preliminary test using barley leaves, a portable photosynthesis system showed transpiration inhibition of 2% soybean oil and 10 times-diluted Avion under field conditions. In another test using the leaves of maize seedlings and apricot tree, 2% liquid paraffin and plant oils such as apricot oil, linseed oil, olive oil, and soybean oil showed significant transpiration inhibition (P=0.05). Especially, paraffin liquid and soybean oil selected from above tests gave good transpiration inhibitory effects against rice at 2%. In addition, the mixture of 2% soybean oil and a spreader showed more elevated inhibition results comparing with soybean oil or the spreader alone indicating that the spreader may be attributed to more uniform diffusion of the hydrophobic material onto the leaf surface of maize seedlings. The hydrophobic material coated physically the stomata and cuticle layers on leaf surfaces of rice. These hydrophobic materials screened in this study are expected to be used as plant coating materials.

• The Korean Journal of Mycology
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1975

Since the importance of casing in fruit body formation of Agaricus bisporus has been emphasized, physico-chemical characteristics of casing materials were discussed by many workers and a mixture of peat and mineral soil as proper casing material has been adopted in many of mushroom growing countries. Because of limited resources of peat in Korea, it is necessary to find practical performance and substitutional materials for casing. The effect of casing on mycelial growth and mushroom yield of A. bisporus varied with materials, its combination and practices etc. The experiments to be discussed in this paper are concerned with pH and Ca of casing material which influence A bisporus, and changes of physico-chemical characteristics with mixing ratio of casing materials and its effect on A. bisporus. The optimum range of moisture content of each material, management of watering and application of physico-chemical characteristics casing materials was also investigated and re-use of weathered spent compost for casing material was described. 1. The effect of calcium on mycelial growth of A. bisporus at various pH in Halbschalentest showed different results with calcium sources. Best results were obtained around neutrality and fresh weight of fruit bodies grown in the range of pH 7 to 8 was highest among the tested levels. 2. Available moisture, pore space, organic matter, cation exchangeable capacity and exchangeable cation was increased by an increase of mixing ratio of peat in casing materials, while an adverse effect was obtained by addition of sand. 3. Mycelial growth on clay loam was more rapid at a lower bulk density of 0.75g/cc and at 20% moisture content on a dry weight basis at the same bulk density. 4. Mixing ratio of casing materials, 60 to 80 per cent by volume of peat mixed with 20 to 40 per cent of clay loam produced the highest yield of fresh fruit bodies and sand the lowest. However, per cent of open cap was highest in peat and lowest in sand. 5. Days required for fruit body initiation was shortened in mixtures of peat and clay loam by one to three days compared with other materials and the formation of flushes was clear. 6. The effect of some physico-chemical characteristics of casing materials on the fresh weight of fruit bodies were estimated by a multiple regression equation; Y=-923.86+$8.18X_1+8.04X_2+7.90X_3+0.12X_4+2.03X_5-0.82X_6-0.54X_7$ where $X_1,X_2,X_3,X_4,X_5,X_6,X_7$ are sand, silt, clay, available moistuer, porosity, organic matter and exchangeable cation respectively. The productivity of certain casing material could be predicted from this equation. 7. Fresh weight of fruit bodies was positively correlated with porosity exchangeable cation, organic matter, available moisture, silt and clay of materials; while sand was negatively correlated. On the contrary, sand was the unique factor reducing per cent of open cap. 8. Distribution of three phases of high productive casing material was concentrated in the range of 10 to 30 per cent solids, 15 to 30 per cent liquids, and 50 to 60 per cent in air volume. 9. Fresh weight of fruit bodies from peat was not affected with heavy watering but in clay loam and sandy loam severe crop losses occurred. Fresh weight of individual fruit was increased and open caps were decreased with heavy watering but light watering resulted in adverse effects: its effect was especially great in peat. 10. Optimum range of moisture content by weight on a dry basis was different with each casing material. To maintain optimum moisture content concerned with yield of fruit bodies and open cap, sandy loam and peat mixtures required daily watering of 0.6, 0.6 to 1. 2 and 1.2 to 2.4 liters per $3.3m^2$ of bed area, respectively. 11. Maximum yield of fruit body was recorded in the range of pF 2. 0 to 2. 5 of casing materials if organic matter content was below 4.2 per cent and in pF 1. 3 to 1.8 if above 7.1%. 12. pF curve of a certain casing material could be draws from moisture content at various pF values by multiple regression equations provided texture, organic matter and calcium of the casing material are given. Optimum moisture range of the casing materials also could be estimated by the equation. 13. It was possible to improve the phyico-chemical characteristics of clay loam and sandy loam by addition of weathered spent compost although the effect was less than in the case of peat. Fresh weight of fruit bodies wsa increased by addition of weathered spent compost but its effect was not as remarkable as peat. Accordingly, further studies will be required.

• The Journal of Society for e-Business Studies
• /
• v.25 no.4
• /
• pp.33-60
• /
• 2020

Along with the rapid advance in internet technologies, ubiquitous mobile device usage has enabled consumers to access real-time information and increased interaction with others through various social media. Consumers can now get information more easily when making purchase decisions, and these changes are affecting the brand landscape. In a digitally connected world, brand image is not communicated to the consumers one-sidedly. Rather, with consumers' growing influence, it is a result of co-creation where consumers have an active role in building brand image. This explains a reality where people no longer purchase products just because they know the brand or because it is a famous brand. However, there has been little discussion on the matter, and many practitioners still rely on the traditional measures of brand indicators. The goal of this research is to present the limitations of traditional definition and measurement of brand and brand image, and propose a more direct and adequate measure that reflects the nature of a connected world. Inspired by the proverb, "A man is known by the company he keeps," the proposed measurement offers insight to the position of brand (or brand image) through co-purchased product networks. This paper suggests a framework of network analysis that clusters brands of cosmetics by the frequency of other products purchased together. This is done by analyzing product networks of a brand extracted from actual purchase data on Amazon.com. This is a more direct approach, compared to past measures where consumers' intention or cognitive aspects are examined through survey. The practical implication is that our research attempts to close the gap between brand indicators and actual purchase behavior. From a theoretical standpoint, this paper extends the traditional conceptualization of brand image to a network perspective that reflects the nature of a digitally connected society.

• Korea journal of population studies
• /
• v.16 no.2
• /
• pp.84-110
• /
• 1993

This study aims at identifying the recent change in marriage behaviors in Korea. The data used here is the vital statistics compiled from the vital registration system of which registration form is put on one from together with the civil registration form. According to the results of this analysis, since 1970 the number of marriages has steadily increased from about 300, 000 in the former of 1970s to about 400, 000 in the latter of 1980s, appproximately coincided with the change in population size at the marriageable age span. The few exceptions that can be seen in the 1970s seem to result from the impact of social upheavals during 1950s; since the birth cohorts affected by the low fertility during the Korean war and the post-war baby-boom generations chracterized by the high fertility entered the marriage market in the 1970s. However, the marriage rate shows a little increase from around 7 in the former of 1970s to around 9 in the latter of 1980s, indicating that the marriage prevalence has been more or less inconsiderably changed during this period. It is also found that the proportion of remarriage to the total marriages has increased to around 10 per cent in 1989, while decreasing that of first marriage. This fact can be attributable to the higher prevalence of divorces and the collapsing of the Confucianism ethic which contributed to expediting the remarriage of widows. Although this proportion is insignificant compared with that of the of more developed countries, it is not difficult to say that the proportion of remarriages will continue to increase in future. The age first at first marriage(AFM) which directly affects the span exposed to the risks pregnancy has increased to the age about 28 for male and about 25 for female in recent years. However, big difference in AFM between urban and rural areas has narrowed, resultant from the increasing involuntary postponement of marriage of rural young population who have met difficulties in seeking their bride or bridegroom in rural areas characterized by the heavy out-migration of young, particularly female, population. The present study shows the reverse relationship between AFM and educational attainment; i.e, the higher the educational attainment the lower the AFM. The conditions which are taken into considerations were the class and the family in the past time but which are, educational attainment, job and personal characteristics. With regard to the age condition, in recent years the male prefers the female younger than himself on the average by 3 years and vice versa, which is reduced form 4-5 years in beginning of 1970s. The age difference bride and bridegroom tends to decrease with the educational attainment increase. This may be attributable to the fact that the persons with the higher educational attainment prefer the love marriage and hence are more likely to choose their counterparts in the about same age. The education condition is characterized by the bridegroom having the higher educational level than bride. It is also significant to note that the proportion of love marriage has increased, whereas that of traditional arranged marriage has decreased. This is true in the urban areas than the rural areas, indicating that rights as well as responsibilities for marriage have been handed over the young population from their parents. In conclusion, the change in the marriage behaviors in Korea are characterized by increasing tendency for the postponement of first marriage, higher prevalences of divorces and a result remarriages, increase of love marriages, narrowing age difference between bride and bridegroom, etc. which are the main results of rapid industrization, increase in educational and economic activity opportunities and change in the ideals of marriages during the past decades. These phenomena prevailing in Korean society would affect not only the family structure that will become less proliferiated but the population size and structure. The most important is that the changes in marriage behaviors of Koreans and their impact on the society with respect to norms, values, morals, of individual and family in the social aspect, change in population size and structure in the demograpic aspects, and economic development in the economic aspects should be integrated into the plannings towards to the future.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.56-77
• /
• 2019

Bi-Seok is a treasure trove of funeral rites and an important cultural asset that can shed light on the historical and social history of calligraphy, but research of the topic is still insignificant. In particular, research on the production method of Bi-Seok remains an unproven field. The production of Bi-Seok can be roughly divided into ma-jeong (refining stone), sculpture, and the Buk-chil (process of engraving letters) process. This article reveals some facts: First, performing ma-jeong to the Sang-Seok, Honyu-Seok, Bi-seok, which are known to be God's things. This process is needed because of the change in the perception of the Honyu-Seok due to the settlement and propagation of Confucian ceremonial rituals in the times of hardship in 1592 and 1636. As the crafting process of ma-jeong did not remain concrete, it was only possible to examine the manufacturing process of Bi-Seok through its materials and tools. Second, the rapid proliferation of Oh-Seok and Sa-jeo-chwi-yong (purchase of things made by private citizens) in the Yeongjo era has great importance in social and cultural history. When the Gang-Hwa-Seok of the commodity were exhausted, the Oh-Seok that was used by Sadebu (upper civil class) were used in the tomb of Jangneung, which made Oh-Seok popular among people. In particular, the use of Oh-Seok and the Ma-Jeong process could minimize chemical and physical damage. Third, the writing method of the Bi-seok is Buk-chil. After Buk-Chil of Song Si-Yeol was used on King Hyojong's tomb, the Buk-Chil process ( printing the letters on the back of the stone and rubbing them to make letters) became the most popular method in Korea and among other East Asian countries, and the fact that it was institutionalized to this scale was quite impressive. Buk-Chil became more sophisticated by using red ink rather than black ink due to the black color that results from Oh-Seok. Fourth, the writing method changes in the late Joseon Dynasty. Until the time of Yeongjo's regime, when inscribing, the depth of the angle was based on the thickness of the stroke, thus representing the shade. This technique, of course, did not occur at every Pyo-Seok or Shindobi, but was maintained by outstanding artisans belonging to government agencies. Therefore, in order to manufacture Bi-Seok, Suk-seok, YeonJeong, Ma-jeong, Jeong-Gan, ChodoSeoIp, Jung-Cho, Ip-gak, Gyo-Jeong, and Jang-Hwang, a process was needed to make one final product. Although all of these methods serve the same purpose of paying respects and propagandizing the great work of deceased persons, through this analysis, it was possible to see the whole process of Pyo-Seok based upon the division of techniques and the collaboration of the craftsmen.

• Korean Journal of Veterinary Research
• /
• v.41 no.2
• /
• pp.203-210
• /
• 2001

Here, we compared the effectiveness of 50 MeV($p{\to}RBe^+$) cyclotron fast neutrons versus $^{60}Co$ ${\gamma}$-rays by the apoptotic fragment frequency in both rat peripheral lymphocytes and crypt cells to check a radiobiological endpoint. The incidence of apoptotic cell death was increased in all irradiated groups, and radiation at all doses trigger rapid changes in both crypt cells and peripheral lymphocytes. These data suggest that apoptosis may play an important role in homeostasis of damaged radiosensitive target organ by removing damaged cells. The curve of dose-effect relationship for these data of apoptotic fragments frequencies was $y=0.3+(6.512{\pm}0.279)D(r^2=0.975)$ after neutrons, while $y=0.3+(4.435{\pm}0.473)D+(-1.300{\pm}0.551)D^2(r^2=0.988)$ after ${\gamma}$-rays. In addition, $y=3.5+(118.410{\pm}10.325)D+(-33.548{\pm}12.023)D^2(r^2=0.992)$ after ${\gamma}$-rays in rat lymphocytes. A significant dose-response relationship was found between the frequency of apoptotic cell and dose. These data show a trend towards increase of the numbers of apoptotic cells with increasing dose. Dose-response curves for high and low linear energy transfer (LET) radiation modalities in these studies were different. The relative biological effectiveness (RBE) value for crypt cells was 1.919. In addition, there were significant peaks on apoptosis induction at 4 and 6h after irradiation, and the morphological findings of the irradiated groups were typical apoptotic fragments in crypt cells that were hardly observed in the control group. Thus, apoptosis induction in both crypt cells and peripheral lymphocytes could be a useful endpoint of rat model for studying screening test and microdosimetic indicator to evaluate the biological effects of radiation-induced cell damage.