• Journal of Korean Society of Transportation
• /
• v.8 no.2
• /
• pp.7-25
• /
• 1990

In road traffic, road circumstances, vehicle, and driver are closely related each other. When road facilities are established in road planning, only road structure has been considered. However, relatively little work has been done regarding the relation between road circumstances and human with respect to a driver. This dissertation focuses on analysis of driver's visual characteristics to improve road circumstances. In this study, driver's visual characteristics are measured with eye-mark recorder and analyzed statistically. This study includes that visual characteristics, visual range, visual time, distribution of fixation duration, and visual moving angle with respect to road circumstances are established qualitatively and quantitatively by driving testing vehicle on streets, roads and high-ways. The main features of this study are : The driver's visual ranges are different over 10% depending on lane in multi-lanes. The visual range on two-lanes is more than twice as big as that on multi-lanes at 85% of whole vision. The right and left visual ranges by as big as that on multi-lanes at 85% of whole vision. The right and left visual ranges by as big as that on multi-lanes at 85% of whole vision. The right and left visual ranges by as big as that on multi-lanes at 85% of whole vision. The right and left visual ranges by speed are $34^{\circ}$ for 30-50km/hr, $28^{\circ}$ for 50-70km/hr, $22^{\circ}$ for 70-90km/hr and 16^{\circ} for over 90km/hr at 95% of visual rate. Accordingly, increasing speed results in narrow visual range.

• YAKHAK HOEJI
• /
• v.47 no.4
• /
• pp.230-233
• /
• 2003

Previously, protoberberine alkaloids such as berberine and palmatine have been found to lower dopamine content in PC12 cells (Shin et at., 2000). In this study, the effects of berberine and palmatine on L-DOPA-induced increase in dopamine level and cytotoxicity in PC12 cells were investigated. Treatment of PC12 with L-DOPA at concentration ranges of 20∼50 $\mu$M increased dopamine content and the increase in dopamine levels by L-DOPA was inhibited by 10∼40 $\mu$M berberine and 10∼80 $\mu$M palmatine, which the concentration ranges did not show a cytotoxicity. However, berberine and palmatine at concentrations higher than 50 $\mu$M and 100 $\mu$M caused a cytotoxicity, respectively. In addition, berberine (10∼20 $\mu$M) and palmatine (10∼50 $\mu$M) at non-cytotoxic concentration ranges aggravated L-DOPA-induced cytotoxicity in PC12 cells (L-DOPA concentration ranges, 20∼50 $\mu$M). The L-DOPA-induced cytotoxicity was also significantly potentiated by berberine (50 $\mu$M) and palmatine (100 $\mu$M) with cytotoxic ranges. These data demonstrate that berberine and palmatine inhibit L-DOPA-induced increase in dopamine content and stimulate L-DOPA-induced neurotoxicity. Therefore, the possibility that the long-term L-DOPA treated patients with berberine and palmatine could be checked the adverse symptoms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2099-2106
• /
• 2006

In this paper, we addressed the node positioning method for minimizing the sensing energy consumption in wireless sensor networks with adjustable sensing ranges. It is necessary for minimizing the sensing energy consumption to minimize the overlapped sensing area by neighboring nodes. To find a optimal node position, we derived a optimal equations by using the overlapped areas, each node's radiuses and expended angles of opposite neighboring nodes. Based on it, we devised a new node positioning method, called as ASRC(Adjustable Sensing Ranges Control). Unlike existing condition based model, our proposed method was derived from mathematical formula, and we confirmed its validity of sensing energy consumption through simulations.

• Ocean and Polar Research
• /
• v.41 no.2
• /
• pp.99-105
• /
• 2019

Black-tailed gulls, Larus crassirostris, have been known as resident birds in Korea, but their wintering and breeding habitat ranges were little known about. We investigated the habitat ranges of Blacktailed gulls breeding on Dokdo Island - which is the eastern end of their breeding colonies in Korea. Three adult Black-tailed gulls were fitted with Global Positioning System data loggers in May 2018 and their positions were tracked for 9 days, 245 days and 365 days each respectively. Black-tailed gulls stayed on Dokdo Island until June for breeding purposes and moved down to the southern part of Japan for wintering. The following year, a Black-tailed gull started to move northward in February and returned to Dokdo Island in April. They traveled a total of $207,334-229,507km^2$ (MCP) throughout a whole year. Based on location density categories accounting for 50% of locations, they used 3,618 to $3,803km^2$ in area. Black-tailed gulls breeding on Dokdo Island used smaller habitat ranges during the wintering period than the other periods. This is the first report on the habitat ranges of Black-tailed gulls breeding on Dokdo Island.

• Journal of applied mathematics & informatics
• /
• v.16 no.1_2
• /
• pp.289-302
• /
• 2004

The asymptotic dependence between the central quasi-ranges and empirical quantiles was studied. The asymptotic dependence are obtained when the sample size is a positive integer valued random variable (r. v.). The dependence conditions and limit forms are obtained under generl conditions such as : the interrelation of the basic variables (the original random sample) and the random sample size is not restricted. In additition the normalizing constants do not depend on the random size.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.4
• /
• pp.284-292
• /
• 2005

This paper presents a new framework of kinematic tolerance synthesis and describes the implemented algorithm for planar mechanical systems comprised of higher kinematic pairs. Input to the synthesis algorithm is a parametric model of the mechanical system with allowed parameter ranges (tolerance ranges). The model is specified as the part profiles consisting of line and arc segments and the motion axes along which each part moves. The algorithm analyzes tolerance in generalized configuration space, called contact zones bounding the worst-case variations, and identifies bad system variations. The bad system variations then are removed out of the parameter ranges by adjusting the nominal parameter values if possible and then shrinking the ranges otherwise. This cycle is repeated until no more bad variations we found. I show the effectiveness of the algorithm by case studies on several mechanisms.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.135-139
• /
• 1999

The static softening behavior of AISI 4140 could be characterized by the hot torsion test in the temperature ranges of 10$0^{\circ}C$~120$0^{\circ}C$ and strain rate ranges of 0.05/sec~5/sec. Deformation efficiency which was based on dynamic materials model was calculated from flow stress curves obtained continuous deformation. Interrupted deformation was performed with 2 pass deformation in the pass strain ranges of 0.25{{{{ epsilon _p}}}} ~3{{{{ epsilon _p}}}} and interrupted time ranges of 0.5~100sec. The dependences of process variables pass strain ({{{{ epsilon _i}}}}) stain rate ({{{{ {. } atop {$\varepsilon$ } }}}}) temperature (T) and interpass time ({{{{ {t }_{i } }}}}) on static recrystallization (SRX) and metadynamic recrystallization .(MDRX) could be indicidually predicted from the modified Avrami's equations. Comparison of the softening kinetics between MDRX and SRX showed that the rate of MDRX was more rapid than that of SRX for the same deformation variables. Controlled multipass deformations were performed using deformation efficiency static and metadynamic recrystallization of AISI 4140.

• Journal of Power System Engineering
• /
• v.22 no.1
• /
• pp.18-24
• /
• 2018

This paper focuses on systematic design about the membership ranges of the main design factors such as control error, control error rate, and sampling time for the fuzzy logic control of the variable speed drive refrigeration cycle. The upper and the lowest limit of the membership ranges are set up from the data of static characteristics obtained by experiments. Three kinds of membership ranges on the control error and the control error rate are tested by experiments. Especially, an effect of sampling time on control performance is also investigated in the same way. Experimental data showed the control error rate and the sampling time strongly effected on the control performance of the refrigeration cycle with a variable speed drive.

• Transactions of Materials Processing
• /
• v.9 no.1
• /
• pp.80-87
• /
• 2000

The static softening behavior of SCM 440 could be characterized by the hot torsion test in the temperature ranges of 90$0^{\circ}C$~110$0^{\circ}C$and strain rate ranges of 0.05/sec~5/sec. Interrupted deformation was performed with 2 pass deformation in the pass strain ranges of 0.25$\varepsilon$p~3$\varepsilon$p and interrupted time ranges of 0.5~100sec. The dependences of process variables, pass strain ($\varepsilon$i), stain rate ($\varepsilon$), temperature (T) and interpass time (ti), on static recrystallization (SRX) and metadynamic recrystallization (MDRX)were individually predicted from the modified Avrami's equations, The dependence of pass strain on MDRX was neglectable. Comparison of the softening kinetics between MDRX and SRX showed that the rate of MDRX was more rapid than that of SRX for the same deformation variables. Controlled multipass deformations were performed using static and metadynamic recrystallization of SCM 440.

• ETRI Journal
• /
• v.34 no.3
• /
• pp.369-378
• /
• 2012

In this paper, we propose new adaptive search range motion estimation methods where the search ranges are constrained by the probabilities of motion vector differences and a search point sampling technique is applied to the constrained search ranges. Our new methods are based on our previous work, in which the search ranges were analytically determined by the probabilities. Since the proposed adaptive search range motion estimation methods effectively restrict the search ranges instead of search point sampling patterns, they provide a very flexible and hardware-friendly approach in motion estimation. The proposed methods were evaluated and tested with JM16.2 of the H.264/AVC video coding standard. Experiment results exhibit that with negligible degradation in PSNR, the proposed methods considerably reduce the computational complexity in comparison with the conventional methods. In particular, the combined method provides performance similar to that of the hybrid unsymmetrical-cross multi-hexagon-grid search method and outstanding merits in hardware implementation.