• The Journal of the Acoustical Society of Korea
• /
• 제24권4E호
• /
• pp.128-131
• /
• 2005

A new algorithm for speech signal segmentation is proposed. This algorithm is based on finding successive similar frames belonging to a segment and represents it by an average spectrum. The speech signal is a slowly time varying signal in the sense that, when examined over a sufficiently short period of time (between 10 and 100 ms), its characteristics are fairly stationary. Generally this approach is based on finding these fairly stationary periods. Advantages of the. algorithm are accurate border decision of segments and simple computation. The automatic segmentations using frame averaging show as much as $82.20\%$ coincided with manually verified segmentation of CMU ARCTIC corpus within time range 16 ms. More than $90\%$ segment boundaries are coincided within a range of 32 ms. Also it can be combined with many types of automatic segmentations (HMM based, acoustic cues or feature based etc.).

• 전자공학회논문지CI
• /
• 제46권2호
• /
• pp.92-99
• /
• 2009

본 논문에서는 교통 신호등 영역 검출을 포함한 교통 신호등 외곽 부분과 신호등 색을 자동으로 판별하여 사용자에게 알려주는 교통 신호등 자동 판별 시스템 구현을 제안하였다. 본 논문은 교통 신호등색을 정확하게 검출하기 위하여 교통 신호등색에 해당하는 파장 범위를 설정하고, 색상 성분을 분할하였다. 색상 성분을 통해 교통 신호등색(빨강 주황 녹색)을 검출하며 배경부분은 그레이 영상으로 변환한다. 다음으로 웨이브렛 변환 알고리즘을 사용하여 다양한 환경에서 신호등 영역을 검출할 수 있는 알고리즘을 제안하였다. 또한, 교통 신호등 인식 부분은 CBIR(Content-Based Image Retrieval)기반에서 캐니 에지 연산자와 허도로프 매칭 알고리즘의 특성을 적용한 인식 알고리즘을 제안하였다. 제안된 알고리즘은 교통 신호등이 첨가되어 있는 조명, 배경 등이 다양한 영상을 대상으로 실험하며, 기존 알고리즘과 비교하여 제안 알고리즘의 성능이 향상되었음을 확인하였다.

• 전기학회논문지P
• /
• 제57권1호
• /
• pp.14-21
• /
• 2008

In this paper, we propose an adaptive contrast enhancement method using dynamic range segmentation. Histogram Equalization (HE) method is widely used for contrast enhancement. However, histogram equalization method is not suitable for commercial display because it may cause undesirable artifacts due to the significant change in brightness. The proposed algorithm segments the dynamic range of the histogram and redistributes the pixel intensities by the segment area ratio. The proposed method may cause over compressed effect when intensity distribution of an original image is concentrated in specific narrow region. In order to overcome this problem, we introduce an adaptive scale factor. The experimental results show that the proposed algorithm suppresses the significant change in brightness and provides wide histogram distribution compared with histogram equalization.

• 센서학회지
• /
• 제33권4호
• /
• pp.187-195
• /
• 2024

Light detection and ranging (LiDAR), a widely used sensor in mobile robots and autonomous vehicles, has its most important function as measuring the range of objects in three-dimensional space and generating point clouds. These point clouds consist of the coordinates of each reflection point and can be used for various tasks, such as obstacle detection and environment recognition. However, several processing steps are required, such as three-dimensional modeling, mesh generation, and rendering. Efficient data processing is crucial because LiDAR provides a large number of real-time measurements with high sampling frequencies. Despite the rapid development of controller computational power, simplifying the computational algorithm is still necessary. This paper presents a method for estimating the presence of curbs, humps, and ground tilt using range measurements from a single horizontal or vertical scan instead of point clouds. These features can be obtained by data segmentation based on linearization. The effectiveness of the proposed algorithm was verified by experiments in various environments.

• Journal of Information Processing Systems
• /
• 제17권5호
• /
• pp.905-917
• /
• 2021

In recent years, edge computing technology consists of several Internet of Things (IoT) devices with embedded sensors that have improved significantly for monitoring, detection, and management in an environment where big data is commercialized. The main focus of edge computing is data optimization or task offloading due to data and task-intensive application development. However, existing offloading approaches do not consider correlations and associations between data and tasks involving edge computing. The extent of collaborative offloading segmented without considering the interaction between data and task can lead to data loss and delays when moving from edge to edge. This article proposes a range segmentation of dynamic offloading (RSDO) algorithm that isolates the offload range and collaborative edge node around the edge node function to address the offloading issue.The RSDO algorithm groups highly correlated data and tasks according to the cause of the overload and dynamically distributes offloading ranges according to the state of cooperating nodes. The segmentation improves the overall performance of edge nodes, balances edge computing, and solves data loss and average latency.

• Korean Journal of Radiology
• /
• 제22권11호
• /
• pp.1797-1808
• /
• 2021

Objective: To determine whether volumetric CT texture analysis (CTTA) using fully automatic tumor segmentation can help predict recurrence-free survival (RFS) in patients with intrahepatic mass-forming cholangiocarcinomas (IMCCs) after surgical resection. Materials and Methods: This retrospective study analyzed the preoperative CT scans of 89 patients with IMCCs (64 male; 25 female; mean age, 62.1 years; range, 38-78 years) who underwent surgical resection between January 2005 and December 2016. Volumetric CTTA of IMCCs was performed in late arterial phase images using both fully automatic and semi-automatic liver tumor segmentation techniques. The time spent on segmentation and texture analysis was compared, and the first-order and second-order texture parameters and shape features were extracted. The reliability of CTTA parameters between the techniques was evaluated using intraclass correlation coefficients (ICCs). Intra- and interobserver reproducibility of volumetric CTTAs were also obtained using ICCs. Cox proportional hazard regression were used to predict RFS using CTTA parameters and clinicopathological parameters. Results: The time spent on fully automatic tumor segmentation and CTTA was significantly shorter than that for semi-automatic segmentation: mean ± standard deviation of 1 minutes 37 seconds ± 50 seconds vs. 10 minutes 48 seconds ± 13 minutes 44 seconds (p < 0.001). ICCs of the texture features between the two techniques ranged from 0.215 to 0.980. ICCs for the intraobserver and interobserver reproducibility using fully automatic segmentation were 0.601-0.997 and 0.177-0.984, respectively. Multivariable analysis identified lower first-order mean (hazard ratio [HR], 0.982; p = 0.010), larger pathologic tumor size (HR, 1.171; p < 0.001), and positive lymph node involvement (HR, 2.193; p = 0.014) as significant parameters for shorter RFS using fully automatic segmentation. Conclusion: Volumetric CTTA parameters obtained using fully automatic segmentation could be utilized as prognostic markers in patients with IMCC, with comparable reproducibility in significantly less time compared with semi-automatic segmentation.

• 대한음성학회지:말소리
• /
• 제58호
• /
• pp.67-81
• /
• 2006

For a large corpus of time-aligned data, HMM based approaches are most widely used for automatic segmentation, providing a consistent and accurate phone labeling scheme. There are two methods for training in HMM. Flat starting method has a property that human interference is minimized but it has low accuracy. Bootstrap method has a high accuracy, but it has a defect that manual segmentation is required In this paper, a new algorithm is proposed to minimize manual work and to improve the performance of automatic segmentation. At first phase, voiced, unvoiced and silence classification is performed for each speech data frame. At second phase, the phoneme sequence is aligned dynamically to the voiced/unvoiced/silence sequence according to the acoustic phonetic rules. Finally, using these segmented speech data as a bootstrap, phoneme model parameters based on HMM are trained. For the performance test, hand labeled ETRI speech DB was used. The experiment results showed that our algorithm achieved 10% improvement of segmentation accuracy within 20 ms tolerable error range. Especially for the unvoiced consonants, it showed 30% improvement.

• 전자공학회논문지B
• /
• 제32B권7호
• /
• pp.974-988
• /
• 1995

In this paper, we propose a range image segmentation algorithm using robust regression. We derive a least $\kappa$th-order square (LKS) method by generalizing the least median of squares (LMedS) method and compare it with the conventional robust regressions. The LKS is robuster against outliers than the LMedS and shows performance similar to the residual consensus (RESC). The RESC uses the predetermined number of sorted residuals, whereas the LKS uses an adaptive parameter determined by given observations rather than the a priori knowledge. Computer simulation with synthetic and real range images shows that the proposed LKS algorithm gives better performance than the conventional ones.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 1998년도 춘계학술발표논문집
• /
• pp.100-105
• /
• 1998

지문 검증은 생체 측정학의 다양한 인증 시스템 중에서 기술의 적용 범위 및 사용의 편의성 등에서 가장 우수한 개인 인증 방법이다. 이러한 지문 인식 과정 중에서 Segmentation은 가장 기초적이지만 이후의 처리과정에 지대한 영향을 미칠 수 있는 과정이다. 특히 잡음이 많은 영상, 회전된 영상, 깨끗하지 못한 영상 등은 Segmentation 방법에 따라 원래의 영상이 훼손될 소지가 많다. 그래서 전자와 같은 지문의 경우, 한계 영역을 가변적으로 설정하여 전경 영상을 선택하는 것이 좋은 방법이다. 이 방법의 특징은 블록의 크기를 잘게 나누어 전경 후보자 영상 여러 개를 만들어서, 그 중에서 전경 영상 하나를 선택할 때, 가변적인 한계 영역을 설정하여, 가장 양호한 전경 영상을 선택할 수 있게 하는 것과, 필터링 적용을 통한 노이즈 제거 방법을 적용하는 것이다. 이 방법을 적용함으로써, 양호한 전경 영상을 선택할 수 있었고, 노이즈까지도 깨끗이 제거하여, 정확히 지문 부분만을 분할(Segmentation) 할 수 있었다.

• 대한원격탐사학회지
• /
• 제39권1호
• /
• pp.87-97
• /
• 2023

Unmanned aerial vehicles (UAVs) can capture high-resolution imagery from a variety of viewing angles and altitudes; they are generally limited to collecting images of small scenes from larger regions. To improve the utility of UAV-appropriated datasetsfor use with deep learning applications, multiple datasets created from variousregions under different conditions are needed. To demonstrate a powerful new method for integrating heterogeneous UAV datasets, this paper applies a combined segmentation network (CSN) to share UAVid and semantic drone dataset encoding blocks to learn their general features, whereas its decoding blocks are trained separately on each dataset. Experimental results show that our CSN improves the accuracy of specific classes (e.g., cars), which currently comprise a low ratio in both datasets. From this result, it is expected that the range of UAV dataset utilization will increase.