• 전자공학회논문지 IE
• /
• v.48 no.2
• /
• pp.32-39
• /
• 2011

The output image of the uncooled thermal infrared camera is difficult the identification of target because of the limited dynamic range and the various noises. Retinex algorithm based on the theory of the human visual perception is known to be effective contrast enhancement technique. However, the image quality is insufficient when it is adopted to the narrow dynamic range image as the infrared image. In this paper, we propose the revised retinex algorithm to enhance the contrast of the infrared image. To improve the contrast enhancement performance, we designed the new dynamic range compression function instead of log function. To reduce the noise and compensate the loss of edge, we added the contrast compensation procedure in the MSR image generation process. According to the output picture comparing and numerical analysis, the proposed algorithm shows the better contrast enhancement performance and the more suitable method for the infrared image enhancement.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.2
• /
• pp.87-95
• /
• 2008

Ladar (Laser Detection And Ranging, Lidar) is a sensor to acquire precise distances to the surfaces of target region using laser signals, which can be suitably applied to ATD (Automatic Target Detection) for guided missiles or aerial vehicles recently. It provides a range image in which each measured distance is expressed as the brightness of the corresponding pixel. Since the precise 3D models can be generated from the Ladar range image, more robust identification and recognition of the targets can be possible. If we simulate the data of Ladar sensor, we can efficiently use this simulator to design and develop Ladar sensors and systems and to develop the data processing algorithm. The purposes of this study are thus to simulate the signals of a Ladar sensor based on linear frequency modulation and to create range images from the simulated Ladar signals. We first simulated the laser signals of a Ladar using FM chirp modulator and then computed the distances from the sensor to a target using the FFT process of the simulated signals. Finally, we created the range image using the distances set.

• International Journal of Contents
• /
• v.11 no.2
• /
• pp.20-30
• /
• 2015

We propose a new method that specifies objective image quality factors by evaluating an image quality measurement model using random images. In other words, No-Reference variables are used to evaluate the quality of an original image without using any reference for comparison. 1000 portrait images were collected from a web gallery with votes constituting over 30 recommendation values. The bottom-up data collecting process was used to calculate the following image quality factors: total range, average, standard deviation, normalized distribution, z-score, preference percentage. A final grade is awarded out of 100 points, and this method ranks and grades the final estimated image quality preference in terms of total image quality factors. The results of the proposed image quality evaluation model consist of the specific dynamic range, skin tone R, G, B, L, A, B, and RSC contrast. We can present the total for the expected preference points as the average of the objective image qualities. Our proposed image quality evaluation model can measure the preferences for an actual image using a statistical analysis. The results indicate that this is a practical image quality measurement model that can extract a subject's preferred image quality.

• Journal of Broadcast Engineering
• /
• v.21 no.6
• /
• pp.920-928
• /
• 2016

Recently high dynamic range imaging technique is hot issue in computer graphic area. We present a progressive tone mapping algorithm, which is based on weighted least squares optimization framework. Our approach combines weighted least squares filtering with iCAM06 model. To show more perceptual high dynamic range images in conventional display, we decompose high dynamic range image into base layers and detail layers. The base layers are obtained by using weighted least squares filter. Then, we adopt chromatic adaption function and non-linear compression function to deal with base layers. Only the base layers reduce contrast, and preserving detail. The image quality assessment shows that our tone mapped image is more similar to original high dynamic range image. Moreover, the subjective result shows our algorithm produces more reliable and pleasing image.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.669-679
• /
• 2013

When an image is converted from HDR (high dynamic range) to LDR (low dynamic range), a tone mapping process is the essential component. Many TMOs (tone mapping operators) have been motivated by human vision which has lower physical luminance range than that in real scene. The representative of human vision properties which motivate TMOs is the local adaptation. However, TMOs are ultimately compressing image information such as contrast, saturation, etc. and the compression causes defects in image quality. In this paper, in order to compensate the degradation of the image which is caused by TMOs, the visual acuity-based edge stop function is proposed for applying the property of human vision to base-detail separation. In addition, using CSF (contrast sensitivity function) which represents the relationship among spatial frequency, contrast sensitivity, and luminance, the sharpness filter is designed and adaptively applied to the detail layer in regard to surround luminance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.11
• /
• pp.919-927
• /
• 2013

In this paper, we present a perception-based tone mapping technique using histogram modification for displaying high dynamic range image. HDR (high dynamic range) tone mapping algorithms are used to display HDR image on LDR (low dynamic rnage) devices. Although perception-based tone mapping methods provides better performance, it dose not always produce good results for a wide variety of images. The proposed method reduces dynamic range by using the perception-based tone mapping function and histogram modification. A derivative of perception-based tone mapping function is used as constraint function of histogram and additional compensation process is performed. This method not only improves contrast by adopting different constraints on each pixel value, but also preserves more visual details. In order to prevent over enhancement, histogram modification technique is applied. Furthermore, it can control the rate of image contrast using control parameters. Subjective and objective evaluations show that proposed algorithm is better than existing algorithms.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.4
• /
• pp.111-123
• /
• 1996

In this paper, a new edge-based segmentation algorithm for range image using pseudo reflectance images (PRIs) is proposed. A model of pseudo reflectance which is useful in analyzing three dimensional scene and objects is introduced and then three PRIs are generated by the model. For generating three PRIs, bels and jain's differential window operator is selected and three different light source directions are determined. Three edge images are extracted from each PRI and a fused (logical ORing) edge image is constructed for the benefit of enhanced edge formation. The final segmentation results of the proposed algoritm are obtained after the processing of thinning, labeling and correcting erroeneous regions with the fused edge image. The good performance of edge detection and segmentation is confirmed via computer simulation with synthetic and real range images.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.334-336
• /
• 2009

Estimation and correction of color temperature of digital images are basis of white balance adjustment after image acquisition stage. White balance is one of the most important image processing techniques for subjective image quality enhancement. Correction of color temperature is applied for white balance adjustment or for changing the mood of a picture. A picture taken under the daylight can be changed to have a mood of sunset or cloudy day, for example. We evaluate color temperature transformation of high dynamic range images in linear and log domain, and we conclude that linear domain transformation shows better results.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2024.05a
• /
• pp.18-19
• /
• 2024

High Dynamic Range 는 디지털 카메라에 내장된 영상 보정 장치인 Image Signal Processor 의 주요 기능 중 하나로서, 영상의 밝고 어두운 정도의 범위를 넓혀, 피사체가 더 또렷하게 보이도록 한다. 초당 수십 프레임을 촬영하는 경우, 실시간 보정처리를 위해 ISP 에 사용되는 기능 및 알고리즘은 신속성과 효율성이 요구된다. 본 연구는 ISP 에 적합한 HDR 알고리즘을 선정을 목표로 하여, Histogram Equalization 과 Contrast Limited Adaptive Histogram Equalization 을 소개한다. 이어 해당 알고리즘들을 컴퓨터 프로그래밍으로 구현, CMOS 이미지 센서를 통해 추출한 raw image 를 보정하여 각 알고리즘의 성능을 검토하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.158-161
• /
• 1995

A new laser diode range-finding speedometer is proposed, which is modulated by a pair of positive and negative triangular pulse current superimposed on a dc current. Since a target velocity is directly obtained form a pure Doppler beat frequency measured during the non-modulation period, the new sensor is free from the difficulties due to the critical velocity encountered in the previous sensor. Furthermore, the different amplitude of the two triangular pluses are so adjusted that the measurable range using only one laser head is greatly expanded to 10cm through 150cm, which is about two times that of the previous sensor. The measurement accuracy for velocity of .+-.6mm/s through .+-.20mm/s and for range is about 1%, and 2%, respectively. Because the new sensor can be operated automatically using a microcomputer, it will be useful for application of a 3-D range image measurement of a slowly moving object.