• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1177-1179
• /
• 2003

Recently, the ground-based laser profiler is used for acquisition of 3D spatial information of a rchaeological objects. However, it is very difficult to measure complicated objects, because of a relatively low-resolution. On the other hand, texture mapping can be a solution to complement the low resolution, and to generate 3D model with higher fidelity. But, a huge cost is required for the construction of textured 3D model, because huge labor is demanded, and the work depends on editor's experiences and skills . Moreover, the accuracy of data would be lost during the editing works. In this research, using the laser profiler and a non-calibrated digital camera, a method is proposed for the automatic generation of 3D model by integrating these data. At first, region segmentation is applied to laser range data to extract geometric features of an object in the laser range data. Various information such as normal vectors of planes, distances from a sensor and a sun-direction are used in this processing. Next, an image segmentation is also applied to the digital camera images, which include the same object. Then, geometrical relations are determined by corresponding the features extracted in the laser range data and digital camera’ images. By projecting digital camera image onto the surface data reconstructed from laser range image, the 3D texture model was generated automatically.

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.73-85
• /
• 1995

The sensor system to measure the distance precisely from the center of the sensor system to the obstacle is needed to recognize the surrounding environments, and the sensor system is to be calibrated thoroughly to get the range information exactly. This study covers the calibration of the active range sensor which consists of camera and laser slit emitting device, and provides the equations to get the 3D range data. This can be possible by obtaining the extrinsic parameters of laser slit emitting device through image processing the slits measured during the constant distance intervals and the intrinsic parameters from the calibration of camera. The 3D range data equation derived from the simple geometric assumptions is proved to be applicable to the general cases using the calibration parameters. Also the exact 3D range data were obtained to the object from the real experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.911-912
• /
• 2013

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.315-321
• /
• 2007

The fast charging photoflash capacitor charger with wide range current limiter is presented. By using proposed control logic block and wide range current limiter, the photoflash capacitor charger can reduce charging time and control life of battery for user convenience. The proposed photoflash capacitor charger has 3s charging time at 3.3V battery voltage, 1.2A current limit condition. It is well-suited for portable device application like digital camera, digital video camera, and mobile phone with camera.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.211-215
• /
• 2010

This study is on the effective methods for non metric camera calibration for its use in accurate close range photogrammetric surveying. We tested four estimation methods used for calculating interior orientation parameters and two methods for building calibration field, one is using targets which have three dimensional coordinates and the other is using two dimensional grid targets. By analysing test results effective and accurate calibration methods were suggested.

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.156-167
• /
• 1995

In this paper, we propose a 3-D range finding method for situation that stereo camera has small translational motion. Binocular stereo generally tends to produce stereo correspondence errors and needs huge amount of computation. The former drawback is because the additional constraints to regularize the correspondence problem are not always true for every scene. The latter drawback is because they use either correlation or optimization to find correct disparity. We present a method which overcomes these drawbacks by moving the stereo camera actively. The method utilized a motion parallax acquired by monocular motion stereo to restrict the search range of binocular disparity. Using only the uniqueness of disparity makes it possible to find reliable binocular disparity. Experimental results with real scene are presented to demonstrate the effectiveness of this method.

• 한국측량학회지
• /
• 제19권3호
• /
• pp.283-290
• /
• 2001

저가의 CCTV유형 CCD카메라를 기반으로 하는 수치 근거리사진측량 시스템의 산업정밀측정의 수행능력을 평가하기 위하여 CCD카메라, 프레임그래버, 수치영상 측정 및 자체검정 광속조정 기법을 통합한 수치근거리 사진측량시스템이 구축되었다. 이 시스템의 적용실험을 위하여 정육면체 형상의 인공어초를 대상물로하여 다중지점 수렴 네트워크상에서 수치영상을 획득하였다. 자체검정 광속조정기법에 의해 CCD 카메라의 기하학적 검정과 동시에 대상물 전면에 대한 사진삼각측량을 수행하였다. 또한 이미 높은 정확도 잠재성이 입증된 고해상도 스틸비디오 카메라(Kodak DCS)를 유사한 네트워크 조건에서 이용하여 처리함으로써 서로 다른 유형의 카메라를 기반으로 하는 두 시스템의 사진삼각측량 결과의 정확도를 비교하였다.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.323-329
• /
• 2009

In this paper, we propose the improvement method of the camera images regardless of exposure environments. By using a double-exposure method, we could improve camera images with clear recognition. We applied the improvement method on the mobile phone. For the feasibility of the proposed algorithm, we compared simulated camera images with the proposed method to conventional images by using auto-exposure image. Experimental results are also shown in this paper.

• 대한토목학회논문집
• /
• 제12권2호
• /
• pp.151-159
• /
• 1992

근거리 사진측량에서 정오차의 보정은 정확도 향상에 중요한 영향을 미치며, 특히 비측량용사진기를 정밀측량에 이용하기 위해서는 정오차에 대한 보정이 선행되어야 한다. 이를 위해 비측량용사진기에 지표를 설치하고 collimator검정방법에 의해 렌즈의 PPS, PPA, EFL, CFL 및 각 상한별 렌즈의 방사방향 왜곡계수를 구하였고, plumb line 검정방법에 의해서도 렌즈의 방사방향 및 접선방향에 대한 왜곡계수를 구하여 정오차 보정을 효율적으로 시도하였다. 이 검정된 비측량용사진기를 이용하여 근접사진측량을 실시하고, 정오차를 보정하므로써 정확도 향상을 꾀할 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제4권1호
• /
• pp.82-87
• /
• 1998

In this study, the theoretical resolution analysis of an active vision system using laser range finder is performed for surrounding recognition and 3D data acquisition in unknown environment. In the result, the resolution of range data in laser range finder is depend on the distance between lens center of CCD camera and light emitter, view angle, beam angle, and parameters of CCD camera. The theoretical resolutions of the laser range finders of various types which are based on parameters effected resolution are calculated and experimental results are obtained in real system.