• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.1033-1036
• /
• 2005

The effect of surface roughness on the contact fatigue was investigated in this study. To accomplish this goal, contact analysis based on the influence functions and the rectangular patch solution was performed to obtain the subsurface stress. Mesoscopic multiaxial fatigue criterion is then applied to predict fatigue damage. Suitable counting method and damage rule were used to evaluate the fatigue life of random loading caused by rough surface. As a result of the analysis, relationship between the life and roughness as well as the creack initiation depth was revealed. Below the critical roughness, It is observed that the fatigue life has hardly changed and creack is initiated around the depth at which the maximum shear stress occurs. Different behavior, however, is observed in case that the roughness is above the critical value.

• International Journal of Concrete Structures and Materials
• /
• 제18권1E호
• /
• pp.23-28
• /
• 2006

In this study, the general theory of fractality is discussed to provide a fundamental understanding of fractal geometry applied to heterogeneous material surfaces like pavement surface and rock surface. It is well known that many physical phenomena and systems are chaotic, random and that the features of roughness are found at a wide spectrum of length scales from the length of the sample to the atomic scales. Studying the mechanics of these physical phenomena, it is absolutely necessary to characterize such multi scaled rough surfaces and to know the structural property of such surfaces at all length scales relevant to the phenomenon. This study emphasizes the role of fractal geometry to characterize the roughness of various surfaces. Pavement roughness and rock surface roughness were examined to correlate their roughness property to fractality.

• 한국전자파학회논문지
• /
• 제17권1호
• /
• pp.39-44
• /
• 2006

본 논문에서는 바다 표면에서 전파의 페이딩 현상을 해석하는데 필요한 bistatic coherent reflectivity를 Monte-Carlo/모멘트 법과 physical optics(PO) 모델을 이용하여 비교하고 계산하였다. 모멘트 법 계산을 위해서 우선 Gaussian 형태로 불규칙한 바다 표면을 생성하였다. 풍속과 유의 파고 등에 대한 태안 앞바다에서의 실제 측정 데이터를 사용하여 이 표면을 생성하였으며, 두 변수간의 관계식을 유도함으로써 측정하기 쉬운 변수인 풍속에 의해 바다 표면 상태를 예측할 수 있는 모델을 만들었다. 평면에서의 결과를 비교함으로써 모멘트 법 모델을 검증하였고, 거친 표면의 경우에 비교적 정확한 수치 해석 방법인 Monte-Carlo/모멘트 법과 간단히 계산이 가능한 이론식인 PO 모델을 비교함으로써 거친 표면에서 PO 모델의 적용 가능한 조건을 찾아내었으며, 전파 경로 해석법을 이용하여 실제 전파의 페이딩 현상을 해석할 때에 사용되는 PO 모델의 유효성을 검증하였다.

• 터널과지하공간
• /
• 제26권6호
• /
• pp.516-523
• /
• 2016

절리면의 거칠기는 암반의 역학적, 수리적 거동에 중요한 영향을 미치는 요인이다. 따라서 이를 해석하기 위한 여러 가지 구성 모델 및 거칠기 정량화 연구가 실험적, 경험적으로 수행되어 왔다. 최근 3D 프린팅 기술의 발전은 특정 거칠기를 갖는 절리면을 생성하는 데 활용될 수 있으며 본 논문에서는 이에 적합한 절리면 생성기법을 소개하고 정량적 평가를 수행하였다. 프랙탈 이론에 따른 랜덤중점변위법을 적용하였으며 생성된 절리면의 거칠기 평가는 $Z_2$의 분포를 계산하여 수행하였다. 그 결과 입력변수 제어를 통하여 목표로 한 거칠기를 구현할 수 있었으며 더 나아가 특정 거칠기 이방성비를 갖는 절리면을 생성할 수 있음을 확인하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.243-250
• /
• 2000

In the partial lubrication regime, the roughness effects are most important due to the presence of interacting asperities. An average Reynolds equation using flow factors is very useful to determine effects of surface roughness on partial lubrication. In this paper, the pressure flow factors for Gaussian and non-Gaussian surfaces are evaluated in terms of kurtosis. The effect of kurtosis on pressure flow factor is investigated using random rough surface generated numerically. The pressure flow factor increases with increasing kurtosis in partial lubrication regime(h/$\sigma$<3). As h/$\sigma$increases, the pressure flow factor approach to 1 asymptotically regardless of kurtosis.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.79-80
• /
• 2002

This paper presents an experimental study of the effect of rolling speed and surface roughness on the mixed elastohydrodynamic (EHD) lubrication characteristics for point contact formed between a real, random, rough surface, steel ball and smooth glass disc. The Thin Film Colorimetic Interferometry measurement technique has been extended to give detailed information about in-contact deformation of the microgeometry. It has enabled to derive the amplitude reduction curve that shows progressive recovering of ball roughness features with increasing speed.

• Tribology and Lubricants
• /
• 제16권6호
• /
• pp.448-454
• /
• 2000

The roughness effects are very important due to the presence of interacting asperities in partial lubrication regime. An average Reynolds equation using flow factors is very useful to determine the effects of surface roughness on mixed lubrication. In this paper, the pressure flow factors for surfaces having Gaussian and non-Gaussian distribution of roughness height are evaluated in terms of various kurtosis. The effect of kurtosis on pressure flow factors is investigated using random rough surface generated numerically. The pressure flow factor increases with increasing kurtosis in mixed lubrication regime (h/$\sigma$<3). As h/$\sigma$ increases, the pressure flow factors approach to 1 asymptotically regardless of kurtosis.

• 한국생산제조학회지
• /
• 제5권1호
• /
• pp.33-42
• /
• 1996

The high coherence of laser beam has made it possible to observe interference effects even in the light scattered from rough surfaces. That's why, when object with a scattering surface is illuminated with laser light, we do see a speckled appearance due to random interference. This sort of unique property of laser speckle has bruht into existence the new noncontaciting techniques such as speckle metrology method of measuring deformation, displacement, and vibration etc of objects with high optical sensitivity. The measurable range of speckle metrology especially used to measure in -plane information, however, is limited by some factors, the so-called strain, rotation tilt of surface and out of displacement perpendicular to the plane of analysis This restrictions severly limits the measurable range of speckle metrology by causing the decorrelation of speckle patterns. It is the purpose of this paper to give a survey on the measurable limitation of speckle photography method that is one of speckle metrology. Namely we will discuss the mutual relationships and problems of each limitations adding the restriction on the largest and smallest displacement measurable with speckle methods.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.280-288
• /
• 2000

In this study, flow factors are evaluated in terms of kurtosis using random rough surface generated numerically. As h/$\sigma$become large øx, øy, øfp approach to 1 and øs, øfs to 0 asymptotically regardless of kurtosis. øx, øy, øfp increase with increasing kurtosis in the mixed lubrication regime. øs, øfs is associated with an additional flow transport due to the combined effect of sliding and roughness. As h/$\sigma$ decreases øs, øfs increase up to a certain point, and then decrease toward zero. This behavior can be attributed to the increasing number of contacts in the mixed lubrication regime. øx in the presence of elastic deformation on the surface is larger than øx in the absence of it because local film thickness( h$\_$T/) increases by elastic deformation.

• 비파괴검사학회지
• /
• 제25권1호
• /
• pp.9-14
• /
• 2005

표면 거칠기가 다른 유리시편에 대해 후방 복사된 초음파 세기의 입사각 의존성(프로파일)이 측정되었다. 후방복사 세기와 레일리(Rayleigh) 표면파 속도는 표면 거칠기에 비례하였고 이 경향은 각기 초음파의 산란규칙과 경화현상으로 설명되었다. 후방복사 프로파일의 면적 역시 표면 거칠기에 민감함을 보여 표면상태에 대한 새로운 비파괴적 평가 변수의 가능성을 보였다. 레일리 각 C-스캔 기법은 화상 명도의 반전과 높은 신호대 잡음비(S/N)를 보여주었다.