• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.669-678
• /
• 1994

The BOD removal characteristics of submerged biofilters filled with three kinds of filter media respectively were experimentally examined with constant temperature, pH value and variable BOD loading and recirculation ratio. Obtained results are as follows; 1. The BOD removal ratio decreases with the increasing $BOD_5$ volumetric loading rate, and the loading rate for the BOD removal over 90% is lower thean $1.6kg{\cdot}BOD_5/m^3{\cdot}d$ for the plastic media of Netring and cubic wire meshes. This is a much large value than $0.3{\sim}0.8kg{\cdot}BOD_5/m^3{\cdot}d$ for conventional activated sludge process. The required submerged biofilter volume is found to be much samller than that of conventional activated sludge process. 2. The decreasing order of BOD removal is Netring (random plastic media), cubic wire meshes (plastic module), and then gravel (stone media). This is mainly due to the media characteristics such as void ratio, specific surface area and media shapes. 3. The $BOD_5$ removal rate increases with the recircuration ration, but the rate of increases becomes samaller as the recirculation ratio increases over 20. When $BOD_5$ loading is $1.8kg{\cdot}BOD_5/m^3{\cdot}d$, the required recirculation rationto obtain 90% $BOD_5$ removal is about 20 for Netring and it was about 30 for cubic wire meshes. 4. Reynold's Number increases with recirculation ratio, and the Reynold's Numbers corresponding to the recircuration ratio of 10~50 are less than 52, showing laminar up flows in the filter. The settled and effluent sludges increase with increase of Reynol's Number, and there are the definite Reynold's Numbers at which the settling sludge concentrations become nearly constant respectively in each filters. 5. In this submerged biofilter system, small volume of sludge hopper can be substituted for a separated settling tank.

• The Journal of Society for e-Business Studies
• /
• v.8 no.3
• /
• pp.165-176
• /
• 2003

Instead of existing cell phones, PDAs are observed as leading wireless Internet devices recently Numerous applications are developed by extended usage of PDAs and it should be installed appropriately according to devices. Furthermore, when battery is discharged, all data stored in RAM(Random Access Memory) becomes obsolete. So it should be recovered or reinstalled from flash memory, backup media or something. In this paper, we present an automatic application installation system(PAIS : PDA Automatic Installation System) to solve problems that users have to install applications by themselves whenever it is necessary. With this system, users feel comfortable by saving time and effort to install each applications and application development companies save cost needed to make materials illustrating installation process. Consequently PAIS may flourish wireless Internet business.

• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.159-166
• /
• 2000

This paper analyzed the transmission performance when we transmited digital TV signal through analog CATV network. We considered random noise, microreflection, and composite tripple beats as channel impairment factors, and random noise and CTB( Composite Tripple Beat) are modelled as Gaussian distribution and Weibull distribution respectively. Channel modellings for microreflections are classified as three cases, and we exploited carrier recovery and blind equalizer to minimize their effects. We developed a computer simulator for the digital transmission system using DVB-C specification to analyze digital transmission performance, and found BER values according to $E_{b}$/$N_{o}$ for each configuration.

• Journal of Broadcast Engineering
• /
• v.6 no.1
• /
• pp.13-20
• /
• 2001

In this paper, we propose a new digital audio watermarking scheme In the cepstrum domain. We insert a digital watermark signal Into the cepstral components of the audio signal using a technique analogous to spread spectrum Communications, hiding a narrow band signal in a wade band channel. In our proposed method, we use pseudo-random sequences to watermark the audio signal. The watermark Is then weighted in the cepstrum domain according to the distribution of cepstral coefficients and the frequency masking characteristics of the human auditory system. The proposed watermark embedding scheme minimizes audibility of the watermark signal. and the embedded watermark is robust to mu1tip1e watermarks, MPEG audio ceding and additive noose.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.3
• /
• pp.146-151
• /
• 2001

Optical disk drive has excellent advantage of random accessibility of which performance is measured by access time. However, due to the increased rotational velocity of the disk and constraints of mechanical structure, two-stage seek algorithm which executes coarse and fine seeks sequentially has been adopted in most commercial optical disk drives. Although the laser spot is moved to a target track by a single seek operation, the limited operation range of the fine actuator restricts the application of the fine seek algorithm below a few hundreds of tracks. Especially, excessive movement of the objective lens causes a failure in generation of track-cross pulse and results in an unstable seek operation. In this paper, a new control algorithm for extending the fine seek range is proposed with an appropriate control structure. The coarse actuator is utilized to reduce the misalignment between the objective lens and the laser beam axis, and the fine actuator is controlled to follow the reference velocity trajectory. The proposed algorithm is applied to a CD-ROM drive to show its feasibility and some experimental results are presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.70-77
• /
• 2002

Necessity of the tole-operation has been increased in many fields. Since the Internet is inexpensive and available all over the world, it is a strong candidate for the transmission media of the tole-operation. However, the Internet has random time delays that may cause instability in the system especially if the tole -operation is bilateral. In the past few years many attempts have been made to overcome the random time delay, So far, they are still insufficient in terms of performance. The ‘Variable holding time’ is introduced to improve the performance of the ‘Event based tole-operation’ which controls a system with a non-time action reference. By holding each event for proper time, the system can quickly respond and be stabilized. The proper holding time should be selected based on the characteristics of the task that the system performs. The factors that reflect those characteristics are investigated. The fuzzy logic is employed to obtain the proper holding time for each event while the tole-operation system is in operation. The experimental results presented in this paper verify effectiveness of the proposed method.

• International journal of advanced smart convergence
• /
• v.5 no.1
• /
• pp.23-29
• /
• 2016

The information is to be considered as important part of any network, the communication nodes within network can able to communicate and transmit information by the means of configured LAN/WAN, or/and using internet technology. Thus, vast enhancement has been made in- exchanging of information over transmission media, this should be beneficial in various disciplines of modern client/server applications but at other side, several massive vulnerabilities have been directly/in-directly associated with them. To resolve the security issues, a security mechanism is proposed which hide the sensitive information of images before transmitting to networks. Random size image samples have used and encrypted to protect them from unauthorized entities. The encryption mechanism manipulates the sample images, and corresponding secret codes are generated which help to protect the images from adversaries. To provide an indestructible security mechanism, cryptography algorithms are deployed and considered as best solutions to keep the secret information of images.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.6
• /
• pp.707-712
• /
• 2005

PRAM (Phase change random access memory) is one of the most promising candidates for next generation Non-volatile Memories. The Phase change materials have been researched in the field of optical data storage media. Among the phase change materials. $Ge_2Sb_2Te_5$ is very well known for its high optical contrast in the state of amorphous and crystalline. However the characteristics required in solid state memory are quite different from optical ones. In this study. the structural Properties of GeSbTe thin films with composition were investigated for PRAM. The 100-nm thick $Ge_2Sb_2Te_5$ and $Sb_2Te_3$ films were deposited on $SiO_2/Si$ substrates by RF sputtering system. In order to characterize the crystal structure and morphology of these films. x-ray diffraction (XRD). atomic force microscopy (AFM), differential scanning calorimetry (DSC) and 4-point measurement analysis were performed. XRD and DSC analysis result of GST thin films indicated that the crystallization of $Se_2Sb_2Te_5$ films start at about $180^{\circ}C$ and $Sb_2Te_3$ films Start at about $125^{\circ}C$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.282-282
• /
• 2011

Low power consuming operation of phase-change random access memory (PRAM) can be achieved by confining the switching volume of phase change media into nanometer scale. Ge2Sb2Te5 (GST) is one of the best materials for the phase change random access memory (PRAM) because the GST has two stable states, namely, high and low resistance values, which correspond to the amorphous and crystalline phases of GST, respectively. However, achieving the fast operation speed at lower current requires an alternative chalcogenide material to replace the GST and shrinking the dimension of programmable volume. In this paper, we have fabricated nanoscale contact area on Ge2Sb2Te5 thin films with trimming process. The GST material was fabricated by melt quenching method and the GST thin films were deposited with thickness of 100 nm by the electron beam evaporation system. As a result, the reset current can be safely scaled down by reducing the device contact area and we could confirmed the phase-change characteristics by applying voltage pulses.

• Journal of Broadcast Engineering
• /
• v.22 no.3
• /
• pp.321-326
• /
• 2017

High Efficiency Video Coding (HEVC) adopted the Discrete Cosine Transform-II (DCT-II) based interpolation filter to improve coding efficiency in motion compensation and estimation. In HEVC, the interpolation filters based on the DCT-II are composed of 8-point for half-pixel and 7-point for 1/4-pixel and 3/4-pixel. In this paper, a DST-VII based interpolation filter is used improve motion compensation and estimation. The experimental results which applied the DST-VII interpolation filter are presented. They show the 0.45% of average bitrate reduction in Random Access configuration and 0.5% of average bitrate reduction in Low Delay B configuration, respectively.