• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.778-784
• /
• 2017

In this paper, we propose wired and wireless distributed control systems designed to improve the freight logistics efficiency and verify wired distributed control systems. The verification condition required that 50 cargo vehicles be connected and operated to travel 21 km from Busan Sinhang station to Jinlye Station at an average speed of about 100km/h. The verification results show that the traction output and braking output of the control and controlled cars are dispersed by the wired distributed control system. The application is expected to more than double the efficiency of the logistics compared to the existing freight transportation system. However, in the case of the wired distributed control system, cable installation and maintenance are difficult, and it is impossible to change the combination of freight vehicles. Through the verification of the wired distributed control system, the applicability of distributed control systems to freight vehicles in Korea was confirmed and the system was further developed to produce a wireless distributed control system. In order to apply the wireless distributed control system, a propagation environment analysis for the ISM band was performed in the testbed and, as a result, it was confirmed that Wifi technology using the ISM band could be utilized. In order to use the WDP (Wireless Distributed Power) devices newly installed in the target vehicles, the transmission / reception control signals associated with the propulsion / braking / total control devices are defined. In the case of wireless distributed control systems, the convenience of their application and operation is guaranteed, but reliability and emergency safety measures should because of the dependence of the control of the vehicle on radio signals.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.17-23
• /
• 2000

The purpose of this paper is to evaluate the relative efficiency of Korean National Railroad (KNR). Railways can be seen as multi-product firms which produced both passenger and freight transportation services. For evaluating the operational efficiencies of 23 UIC (International Union of Railways) members including KNR we use data envelopment analysis (DEA) in which multiple inputs and multiple outputs can be handled explicitly.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.125-134
• /
• 2000

This paper presents the results of vehicle dynamics simulation for development of single axle bogie for freight vehicle. Those results consists of hunting stability, ride comfort and curving performance such as derailment ratio, unloading ratio. Dynamic behaviors of vehicle having single axle bogie is carried out using the multi-body dynamics simulation program(VAMPIRE). The results of analysis meet the criteria proposed by Korean National Railroad(KNR) and Korea Railroad Research Institute(KRRI).

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.985-990
• /
• 2005

The success of road transportation, in dominating the surface movement of freight, is now threatened by increased traffic congestion, falling average motorway speed and rising in logistics costs, oil price. Due to the necessity for an effective transport system, we need to improve domestic transport infrastructure to reduce logistics cost by shifting to rail system. To analysis the demand characteristics in advance against these hypothetical circumstances, Stated Preference, which is called SP, approaches have been adopted to analysis the shipper's mode choice behaviors as RP(Revealed Preference) approaches are not appropriate. The results also indicate that the most effective policy to divert the freight volume from road to railway is to reduce freight rates for the railway with improved reliability.

• Journal of Navigation and Port Research
• /
• v.29 no.9
• /
• pp.795-800
• /
• 2005

Nowadays, road transportation which has played a key role in the market of both passenger and freight transportation is facing with a serious problem, the traffic congestion causing a delay of transportation. Therefore, railroad transportation is considered as an attractive alternative mode of inland transportation due to its inherent merits in mass transportation such as relatively low cost compared with road transportations, less air pollution and noise than other mode ets. In this paper, therefore, we examine the current situation of railroad transportation markets including TKR(Trans- Korean Railway}, TSR(Trans-Siberian Railway} and prospects for the connection of TKR-TSR. And then we examine the structure of the container transportation market by railroad in Korea with a brief analysis of the traffic volume of TKR-TSR.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.2
• /
• pp.65-72
• /
• 2019

In long freight trains, there is a brake time delay in neighboring freight cars, which causes damage and fractures in the couplers, especially at their knuckle. A problem in the couplers of the cars can cause derailment and damages of human life and property. In this study, maximum forces on the couplers are studied when a long freight car brakes with the brake delay time and coupler gap. We make a dynamic model of 50 freight cars and couplers, applying contact between the couplers and a characteristic curve to express the force and displacement of the buffers using SIMPACK, which is a multi-body dynamics program. We use EN 14531-2, which is a standard of freight car brakes, to verify the dynamic model. Then, we compare the analyzed impact force with the coupler knuckle standard after applying the two carriages of a locomotive in the model based on the dispersed double head control system. The result shows that all coupler gap conditions satisfy the infinite lifetime of the material when the brake delay time is 0.1 second.

• Journal of Environmental Health Sciences
• /
• v.34 no.2
• /
• pp.153-160
• /
• 2008

Personal noise exposure was assessed in railroad operators working in 40 operation units including the Gyeongbu line, Honam line, and Janghang line between 2004 and 2006. 8-hour TWA were assessed based on the MOL (Ministry of Labor) guideline on noise evaluation, and 17% of these measurements exceeded 85 dBA while 70% were over 80 dBA. When the ACGIH TLV is adopted, 40% of measurements were over TLV (85 dBA). The noise exposure risk of railroad operators was higher for diesel locomotive operation and longer operational distances; in addition, the risk was higher for passenger car operation compared to freight car driving. Given that in Korea, over the past 30 years diesel locomotives have provided most of the railway's motive power and that hearing protective equipment is not likely to be used by workers during operation, railroad operators are at a high risk of noise-induced hearing loss. The result of audiometric test among 568 railroad operators showed that 32.6% of those tested had a hearing threshold shift of more than 40 dB. In conclusion, this study calls for more fundamental measures including noise control countermeasures within the operation areas, development of equipment that generates less noise and adopting limitation on the operation distance for a work shift.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.265-274
• /
• 2017

For accurate demand forecasting of railway logistics, we estimated intercity freight mode choice models based on the binary logit model and using production-consumption data from the Korea Transport Database. We estimated two types of models and compared the results by major item of railway logistics, such as container, cement, and steel: 1) The aggregate freight mode choice models are based on the revealed preference (RP) data and 2) The disaggregate models are based on the stated preference (SP) data. With respect to the container, the travel time variable was found to be statistically significant; however, the travel cost variable was not statistically significant in the RP model, while the travel cost variable was statistically significant in the SP model. For cement and steel, the travel cost variables were statistically significant but the travel time variables were not statistically significant in either the RP or the SP models. These results are inconsistent with results from previous studies based on SP data, which showed that the travel time variables were significant. Consequently, it can be concluded that the travel time factor should be considered in container transport, but that this factor is negligible for cement and steel transport.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.772-778
• /
• 2009

By rising the interests of the railroad, It has been required the research about railroad structure. And since 2000, the study about railway bridges caused by steel box railway bridges has been only 0.2%. So I was hard to find out about steel box railway bridges. In this study, I evaluate and analyze 4 types(KTX, Saemaeul, Mugunghwa, Freight) of dynamic caused by train loading, natural frequency and damping ratio, verticality deflection and verticality acceleration, end slope deflection, impact factor for dynamic characteristics analysis. natural frequency was measured 2.45Hz~3.34Hz and damping ratio revealed for 1.26~2.84%. Maximum verticality deflection(4.86mm) was sufficiently satisfied the design criteria(30.1mm), but in the case of verticality acceleration's respond, design criteria BRDM(Bridge Design Manual) & CTRL presentation derive rail limit value 0.35g be more than value 6 time recorded, maximum was measured 0.49g in 3 kinds of train(KTX, Saemaeul, Mugunghwa), except for Freight. Survey impact factor of Experiment bridge was 0.20 which is measured when the KTX(15:04) was driving. impact factor is enough contended with design criteria 0.29 which is presented in domestic railway design criteria and thoroughly guarantee the dynamic stability.

• Journal of the Korean Society for Railway
• /
• v.11 no.1
• /
• pp.33-38
• /
• 2008

To reduce the cost and time of transport in Eurasian railroad networks such as TKR, TCR and TSR owing to the problem of different track gauges (narrow/standard/broad gauge), it is important to develop the gauge-adjustable wheelset system to adapt easily to these gauges. Moreover, freight trains having the gauge-adjustable wheelsets should be passing various curved tracks in railroad networks. Therefore, to assure the safety of the gauge-adjustment whellset system, it is necessary to evaluate integrity of locking parts in the system using stress analysis. This study is focused on analyzing contact stress of locking parts by using FEA(finite element analysis) simulation during the gauge changeover operation and freight trains' service in the curved track, respectively.