• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.637-644
• /
• 2016

This paper is a follow-up to previous papers entitled, "Development of Tunnel-Environment Monitoring System and Its Installation" I [1] and II [2]. The target tunnel of these studies is the Solan Tunnel, which is a loop-type, single-track, 16.7-km-long tunnel located in mountainous terrain and passing through the Baekdudaegan mountain range. It is an ordinary railway tunnel designed for both freight and passenger trains. We analyzed the environmental conditions of the tunnel using temperature and humidity data recorded over approximately one year. The data were recorded using the Tunnel Rough Environment Measuring System (TREMS), which measures environmental data in subway and high-speed train tunnels and is installed in three locations inside the tunnel. Previous studies analyzed environmental conditions inside tunnels located in or near a city, whereas the tunnel in this study is located in a mountainous area. The tunnel conditions were compared with those measured outside the tunnel for each month. Hourly changes during summer and winter periods were also analyzed, and the environmental conditions at different locations inside the tunnel were compared. The results are widely applicable in studies on the thermal environment and air quality of tunnels, as well as for computer analysis of tunnel airflow such as tunnel ventilation and fire simulations.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.65-78
• /
• 2006

This paper investigates the cost structure ot the Korea and Japan railroad industry with respect to density, scale and scope economies as well as productivity growth rate using a generalized trans)og multiproduct cost function model. The paper then assumes that the Korea and Japan railway companies pi·educe three outputs (incumbent railway passenger-kilometers. Shinkansen passenger-kilometers, ton-kilometers of freight) using four input factors (labor, fuel, maintenance, rolling stock and capital). The specified cost function includes foul other independent variables: track lengths to reflect network effects, two dummies to reflect nation and ownership effects, and time trend as a proxy for technical change. The simultaneous equation system consisting of a cost function and three input share equations is estimated with the Zellner's iterative seemingly unrelated regression. The unbalanced panel data used in the paper, a total of 154 observations. are collected from the annual records of the Korea National Railroad (KNR) for the yews $1977{\sim}2003$, Japan National Railways (JNR) for the years $1977{\sim}1984$. seven Japan Railways (JR's) for the years $1987{\sim}2003$. The findings show that the Korean and Japanese railways exhibit product-specific and overall economies of density but product-specific diseconomies of scale with respect to incumbent railway passenger-kilometers, Shinkansen-kilometers and ton-kilometers. However, the railways experience mild overall economies of scale which result from economies of scope associated with the joint production of incumbent railway/Shinkansen and feight, freight/incumbent railway and Shinkansen except Shinkansen/incumbent railway and freight. In addition, the economies of density and scale in the KNR, JR east, JR central, and JR west companies at the point of the years $1990{\sim}2003$ average is generally analogous to the above results at the point of sample average. There also appear to be economies of ssope associated with the joint Production of the incumbent railway and Shinkansen in JR central but diseconomies of scope in JR East and JR West. The findings also indicate that the productivity growth rate of the privately-owned JR's is larger than that of the government-owned KNR.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1178-1185
• /
• 2010

Recently, high speed of container freight cars is causing fatigue damage of wheel. Sudden failure accidents cause a lot of physical and human damages. Therefore, damage analysis for wheel prevents failure accident of container freight car. Wheel receives mechanical and thermal loads at the same time while rolling stocks are run. The mechanical loads applied to wheel are classified by the horizontal load from contact of wheel and rail in curve line section and by the vertical force from rolling stocks weight. Also, braking and deceleration of rolling stocks cause repeated thermal load by wheel tread braking. Specially, braking of rolling stocks is frictional braking method that brake shoe is contacted in wheel tread by high breaking pressure. Frictional heat energy occurs on the contact surface between wheel tread and brake shoe. This braking converts kinetic energy of rolling stocks into heat energy by friction. This raises temperature rapidly and generates thermal loads in wheel and brake shoe. There mechanical and thermal loads generate crack and residual stress in wheel. Wetenkamp estimated temperature distribution of brake shoe experimentally. Donzella proposed fatigue life using thermal stress and residual stress. However, the load applied to wheel in aforementioned most researches considered thermal load and mechanical vertical load. Exact horizontal load is not considered as the load applied to wheel. Therefore, above-mentioned loading methods could not be applied to estimate actual stress applied to wheel. Therefore, this study proposed safety estimation on wheel of freight car using heat-structural coupled analysis on the basis of loading condition and stress intensity factor.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.159-173
• /
• 2004

Using a generalized translog multiproduct cost function model, this paper examines economies of scale and scope in the vertically-integrated Korean railway industry. The paper then conceptualizes that the Korea National Railroad (KNR) produces four outputs (passenger-kilometers, ton-kilometers of freight, average length of passenger trips, and average length of freight haul) using three input factors(labor, fuel and maintenance, and rolling stock and capital). Using time series data collected from the KNR's annual records for the years from 1977 to 2002, the simultaneous equation system consisting of a cost function and two input share equatins is estimated with the Zellner's iterative seemingly unrelated regression. The findings show that the cost function corresponding to a non-Cobb-Douglas, non-homothetic, and non-homogeneous production technology adequately represents the KNR's cost structure. On the other hand, the Korean railway industry experiences sizeable overall scale economies, which result from substantial product-specific scale economies associated with passenger-kilometers and freight ton-kilometers and from scope economies associated with their joint production. In addition, the magnitude of economies of scope is influenced largely by the ratio of passenger trips, and has increased over time as the former has increased while the latter has decreased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.609-617
• /
• 2017

Railways are one of the safest and most important transportation systems in the world. On the other hand, due to the increasing complexity of the railway system and the running distance of rail vehicles, railway accidents occur continuously every year. In particular, in the case of high-speed trains and freight trains, if the function of the axle bearing is lost due to abnormal overheating of the axle box bearing, the load on the axle becomes uneven. Therefore, abnormal overheating in the train axle box bearings can cause serious accidents or derailments. For this purpose, a Hot Box Detector (HBD) was installed in the track side of a high speed line to detect abnormal overheating. This paper proposes an EWMA technique-based axle temperature monitoring method to detect abnormal overheating quickly and efficiently. A statistical design of the proposed method was also performed. The proposed method has better performance compared to the current method in the case of abnormal overheating and the performance is improved by approximately 170% at the maximum.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1030-1036
• /
• 2009

In 1990's, in Europe and some advanced nations, the structural reform of the railroad industry for improving the productive efficiency of the railroad industry and competitive power had been progressed. This paper empirically explores the relationship between railway restructuring and productive efficiency in the railway industry. We use Data Envelopment Analysis (DEA) to construct efficiency scores, and explain these scores, using Tobit regression analysis by using variables reflecting institutional factors and organizational type. Our results suggest that vertical separation, infrastructure and services are separated, and horizontal separation, passenger service and freight service are separated, improve productive efficiency. We also find that market competition has positive effect on the efficiency, but independent management from the government has negative effect, which is in line with economic intuition as well as with expectations on the railway restructuring. As a consequence, increased independence without sufficient competition and adequate regulation may deteriorate incentives for productive efficiency.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2303-2315
• /
• 2008

Finally, Musan-Bongdong section in Kyeong-Ui corridor opened on 11. DEC.2007, which is a historical event, because this connection means the restoration of 56 yrs' disconnection since 1951 and also starting point launching to connect china, Mongolia, Russia for continental railway logistic infrastructure. This is also one of master plans about the northern line in TAR, carried out by UNESCAP, so this study will touch up each country's railway status and the next tasks related with trans-continental railway such as North Korea, Russia, China. Also, this study reveal a mid-long term development strategy to improve the North Korea railroad for a continent rail link and international railroad transportation between China and Russia, and also checks the way of confrontation to the domestic infrastructure for the activation of the continent railway and the north and south, investigates concretely how to establish TAR northern part routes as soon as possible.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.187-194
• /
• 2016

It is necessary to determine reliability indexes of existing railway bridges prior to setting up a proper target reliability index that can be used to introduce a reliability based limit state design method to design practice. Reliability is evaluated for a six PSC-I girder railway bridge, which is one of many representative types of double-track railway bridges. The reliability assessment is carried out for an edge girder subjected to bending moment. In the assessment, the flexural resistance and the fixed-load effect were obtained using existing statistical values from previous research on the introduction of limit state design to road bridge design. On the other hand, the live-load effect was determined using statistical values obtained from field measurement for the Joong-ang corridor, on which heavy freight trains are frequently passing. The reliability assessment is performed by AFOSM(Advanced First Order Second Moment method) for the limit state equation, and a sensitivity analysis for the reliability is performed for each factor of the load and resistance effects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4532-4541
• /
• 2013

With speed up of railway, the demand for safety of the railroad transportation is on the increase in Korea's conventional railways. In additions, freight trains with heavier axle load are required to run conventional railways. In order to solve these requirements, the increase of rail weight and the application of long rail system have been underway in conventional railways. However, the research on ties that is absolutely influencing the track stiffness in ballasted tracks has not been much progress. In this paper, the new H-typed tie is developed to increase the track stiffness and reduce the track irregularity. And from the structural analysis by FE program, the intial design drawing of the new H-typed tie is proposed.

• Journal of East Asia Management
• /
• v.3 no.2
• /
• pp.21-41
• /
• 2022

This study aims to analyze the characteristics of the management situation of the Korea Railroad Corporation(KORAIL) through the management innovation process of the KORAIL and to suggest its implications for military application. Despite stable demand, the railway passenger industry had the limitation of not being able to abolish deficit routes due to public service obligations. In addition, the launch of the Suseo High-Speed Line has introduced a competitive system, posing a threat to corporate management. KORAIL wanted to overcome this crisis by innovating its management through the utilization of big data, improvement of the freight business, decentralization of demand, the introduction of tourism railroads, and development of station influence areas. By utilizing big data, KORAIL was able to optimize the railway fare system while reducing fixed costs spent on railway maintenance. It also drastically reduced the station of cargo and created a base station to pursue economies of scale. On the other hand, the existing exclusive station system was abolished to solve the chronic saturation of the downtown area, and the railway demand was moved to Gwangmyeong Station and Suwon Station to optimize the passenger supply. In particular, it developed a new business model called the tourism railway by developing the mountain Byeokjin Line, which was a chronic deficit line, and sought to improve liquidity through the development of the station influence area. Such a process of innovation at KORAIL suggests an appropriate direction in seeking ways to innovate the military medical institutions. First of all, the necessity of improving organizational immersion through the development of a personnel structure suitable for the compulsory organization, while expanding the facilities of the division and corps, and reducing the time required for medical treatment and waiting through the establishment of a data-based medical system was suggested. Next, it was also discussed to integrate the National Health Medical College, which received accreditation as a medical facility through the designation of advanced general hospitals and is ultimately under discussion with the Medical Institution. Through this, we hope that the military medical institutions, which are facing various challenges, will overcome existing limitations and be re-lighted as innovative institution that provides comprehensive public health services.