• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.772-778
• /
• 2009

By rising the interests of the railroad, It has been required the research about railroad structure. And since 2000, the study about railway bridges caused by steel box railway bridges has been only 0.2%. So I was hard to find out about steel box railway bridges. In this study, I evaluate and analyze 4 types(KTX, Saemaeul, Mugunghwa, Freight) of dynamic caused by train loading, natural frequency and damping ratio, verticality deflection and verticality acceleration, end slope deflection, impact factor for dynamic characteristics analysis. natural frequency was measured 2.45Hz~3.34Hz and damping ratio revealed for 1.26~2.84%. Maximum verticality deflection(4.86mm) was sufficiently satisfied the design criteria(30.1mm), but in the case of verticality acceleration's respond, design criteria BRDM(Bridge Design Manual) & CTRL presentation derive rail limit value 0.35g be more than value 6 time recorded, maximum was measured 0.49g in 3 kinds of train(KTX, Saemaeul, Mugunghwa), except for Freight. Survey impact factor of Experiment bridge was 0.20 which is measured when the KTX(15:04) was driving. impact factor is enough contended with design criteria 0.29 which is presented in domestic railway design criteria and thoroughly guarantee the dynamic stability.

• 한국소음진동공학회논문집
• /
• 제19권12호
• /
• pp.1306-1314
• /
• 2009

By rising the interests of the railroad, It has been required the research about railroad structure. And since 2000, the study about railway bridges caused by steel box railway bridges has been only 0.2 %. So I was hard to find out about steel box railway bridges. In this study, I evaluate and analyze 4 types(KTX, Saemaeul, Mugunghwa, Freight) of dynamic caused by train loading, natural frequency and damping ratio, verticality deflection and verticality acceleration, end slope deflection, impact factor for dynamic characteristics analysis. natural frequency was measured 2.45 Hz~3.34 Hz and damping ratio revealed for 1.26~2.84 %. Maximum verticality deflection(4.86 mm) was sufficiently satisfied the design criteria(30.1 mm), but in the case of verticality acceleration's respond, design criteria BRDM(bridge design manual) & CTRL presentation derive rail limit value 0.35 g be more than value 6 time recorded, maximum was measured 0.49 g in 3 kinds of train(KTX, Saemaeul, Mugunghwa), except for Freight. Survey impact factor of Experiment bridge was 0.20 which is measured when the KTX(15:04) was driving. impact factor is enough contended with design criteria 0.29 which is presented in domestic railway design criteria and thoroughly guarantee the dynamic stability.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.311-318
• /
• 2001

The CWR, when installed on the bridge, may introduce extra responses in displacement, stress etc. due to the expansion of bridge girders. To release these responses, a special concern must be put on the CWR on bridges, especially for the long span bridges. Since the risk of derailment of vehicle due to buckling or breakout of the rails on bridges is of importance, the establishment of appropriate guidelines to check the performance of CWR on bridges is crucial for safe operation of train. In this study, using the program CWRAP, specialized for response of rails on bridges, several schemes for constructing CWR on bridges are suggested. In audition, a special concern is given to the bridge with sharp curve which is vulnerable to buckling due to temperature loads.

• 대한토목학회논문집
• /
• 제31권6D호
• /
• pp.867-874
• /
• 2011

유도상 교량은 토노반 자갈궤도에 비해 차량 주행으로 인한 열차하중 전달 시 거더 진동의 영향으로 궤도진동이 크게 발생하며, 이로 인한 자갈마모 발생량이 더 많다. 특히 강우 처리를 위한 배수구 확보가 제대로 되지 않을 경우 도상분니 현상을 발생시키고 이는 유지보수 작업량 증가 및 차량 승차감 저하로 이어지게 된다. 국내 도상두께에 대해 검토한 결과 열차의 운행특성에 따라 달리 하는 해외기준과 달리 현장여건을 고려하지 않고 선로의 설계속도와 열차의 통과톤수에 따라 획일적으로 도상두께 범위를 설정하고 있다. 본 논문에서는 운행선 유도상 교량의 도상두께 변화에 따른 교량 상 자갈궤도의 진동 변위 및 차량의 승차감을 계측하여 진동저감 효과를 검증하고, 시험 부설한 호남선 요천교에 대한 적정 도상두께를 제시하였다.

• 한국재난정보학회 논문집
• /
• 제7권4호
• /
• pp.259-265
• /
• 2011

2005년 KTX 개통이후 고속철도는 친환경적, 고효율 교통 수단으로 급부상하고 있으며, 최근 정부에서도 KTX를 중심으로 미래 교통망을 구축할 것을 계획하고 있다. 이러한 분위기에 부흥하여 건설 또는 설계중인 구조물들도 증속에 대비하고 있으며, 기존선의 경우도 개량을 계획하고 있다. 이 연구에서는 최근 개발된 중경간 PSC 거더 교량의 동적안전성 검토를 통하여 고속철도 운행에 따른 적합성을 평가하였다. 연구에 적용된 교량은 IT, Precom, WPC 거더교이며, 동등 비교를 위하여 동일한 모델링 및 해석 기법을 적용하였다. 동적성능 평가에 적용된 지표는 고유진동수, 연직 및 단부 처짐, 단부 축방향 변형, 궤도틀림 등이며, 적용된 하중은 KTX 이동하중이다. 동적해석은 최고속도 420km/hr까지 10km/hr 간격으로 증속하여 수행하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.684-689
• /
• 2002

This paper represents the life-cycle cost(LCC) of steel bridges which are located on the train-network. Corrosion problems are mainly considered in the steel members such as steel plate girder, box girder, truss and arch. Based on the current value, initial construction cost, maintenance cost and demolition cost are calculated and life-cycle costs are formulated for the several types of bridges. From the comparison on each LCC, an effective painting method is recommended for reducing the LCC of steel bridges. Even though the initial cost of Super Weather Resistance Heavy Duty Paintings (Resin Fluoride) is expensive, because of the long endurance, the LCC of steel bridges painted with Super Weather Resistance Heavy Duty Paintings (Resin Fluoride) is less than that painted with General Heavy Duty (Rubber Chloride).

• 한국안전학회지
• /
• 제26권4호
• /
• pp.80-86
• /
• 2011

Structural optimization algorithm of steel box girder bridges using improved higher-order approximate reanalysis technique is proposed in this paper. The proposed approximation method is a generalization of the convex approximation method. The order of the approximate reanalysis for each function is analytically adjusted in the optimization process. This self-adjusted capability makes the approximate structural analysis values conservative enough to maintain the optimum design point of the approximate problem. The efficiency of proposed optimazation algorithm, compared with conventional algorithm, is successfully demonstrated in the steel box girder bridges. The efficiency and robustness of proposed algorithm is also demonstrated in practical steel box girder bridges.

• 한국철도학회논문집
• /
• 제3권2호
• /
• pp.51-61
• /
• 2000

In this study, field measurements of vibration on the structures supporting railroad track were performed. The vibration data obtained were analyzed to find out any correlation between its magnitude and several factors such as type of bridges, distance from the track, type of train, frequency characteristics, etc. As a result, the magnitude of vibration turned out to be the highest in the steel bridge, the concrete bridge and steel-concrete combined bridge were the next in descending order. It was also found that the dynamic characteristics of ground were the most important factors among several affecting vibration near by the railroad track. And the empirical ground vibration estimation equation for estimating ground vibration was developed. The proposed equation with respect to distances from the railroad could be easily used for the estimation of ground vibration at the residential areas nearby the track.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1533-1538
• /
• 2011

The dynamic characteristics such as resonant frequencies and dampings have been utilized as important parameters in dynamic behavior and inverse analyses. In general, the dynamic parameters have been determined based on design and experimental data, but experimental studies on the time-dependent changes of the dynamic parameters during service have rarely been conducted. Especially, unlike highway bridges, it is much easier for railroad bridges to estimate accumulated amount of fatigue because of the controlled train operation, and the study of dynamic characteristic change due to fatigue is useful, since it can enhance the accuracy of dynamic analysis. In this paper, the dynamic characteristic change due to fatigue is measured via the modal test on the PSC girder during a fatigue test. The test specimen utilized in the test is the IT girder which enhances the sectional capacity of the conventional PSC girders. The test specimen is designed 10m long and the modal tests are conducted during the application of fatigue load two million times. The test result shows that considerable changes in the measured dynamic parameters are observed as the fatigue accumulates, and these changes during the service life should be considered in designing railroad bridges.

• International Journal of Railway
• /
• 제5권3호
• /
• pp.103-113
• /
• 2012

Infrastructure costs could be greatly reduced if the need for bridges and tunnels was reduced, or if the line could be shortened. Tilting trains might be a less costly alternative to building new tracks with large curve radii, because tilting trains can negotiate tighter curves without having to decrease their speeds. Tracks built for tilting trains would be cheaper, as they require fewer bridges and tunnels. This paper compares the construction costs of two different options for the new Dodam-Yeoncheong section on the Central line, which includes 148.65 km of new electrified double-track with a design speed of 250 km/h. The first option is to straighten the high-speed line. The second option is to build a line with small radii curves and run tilting trains on the line. In the first option, tunnels would account for about 51% of the new section. In comparison, the second option would have shorter curves and fewer tunnels and bridges which would reduce construction costs. Furthermore, alignment modifications could be made to several segments on the straight line, making the most of the existing roadbed. The analysis concluded that the line suited to tilting trains would be 95.7 million USD cheaper to build the straight route. That is a savings of 2.8% of the total project cost. However, this option would increase the total travel time of the route by 1.2 minutes, which means it is not necessarily the best choice.