• 제목/요약/키워드: rail-bridge interaction analysis

검색결과 64건 처리시간 0.018초

Prediction and analysis of structural noise of a box girder using hybrid FE-SEA method

  • Luo, Wen-jun;Zhang, Zi-zheng;Wu, Bao-you;Xu, Chang-jie;Yang, Peng-qi
    • Structural Engineering and Mechanics
    • /
    • 제75권4호
    • /
    • pp.507-518
    • /
    • 2020
  • With the rapid development of rail transit, rail transit noise needs to be paid more and more attention. In order to accurately and effectively analyze the characteristics of low-frequency noise, a prediction model of vibration of box girder was established based on the hybrid FE-SEA method. When the train speed is 140 km/h, 200 km/h and 250 km/h, the vibration and noise of the box girder induced by the vertical wheel-rail interaction in the frequency range of 20-500 Hz are analyzed. Detailed analysis of the energy level, sound pressure contribution, modal analysis and vibration loss power of each slab at the operating speed of 140 km /h. The results show that: (1) When the train runs at a speed of 140km/h, the roof contributes more to the sound pressure at the far sound field point. Analyzing the frequency range from 20 to 500 Hz: The top plate plays a very important role in controlling sound pressure, contributing up to 70% of the sound pressure at peak frequencies. (2) When the train is traveling at various speeds, the maximum amplitude of structural vibration and noise generated by the viaduct occurs at 50 Hz. The vibration acceleration of the box beam at the far field point and near field point is mainly concentrated in the frequency range of 31.5-100 Hz, which is consistent with the dominant frequency band of wheel-rail force. Therefore, the main frequency of reducing the vibration and noise of the box beam is 31.5-100 Hz. (3) The vibration energy level and sound pressure level of the box bridge at different speeds are basically the same. The laws of vibration energy and sound pressure follow the rules below: web

선형해석법을 이용한 교량상 장대레일의 안정성 해석 방법 연구 (Stability Analysis for CWR on the Railway Bridges by Linearized Method)

  • 최영길;오주원
    • 한국철도학회논문집
    • /
    • 제12권4호
    • /
    • pp.472-480
    • /
    • 2009
  • 장대레일의 축력해석은 기하적 비선형 및 재료적 비선형해석을 수행하여야 하므로 그 해석 자체가 비선형 해석으로서 난해하고 하중이력의 적용순서 등에 따라 해석결과가 다르게 나타난다. 이러한 해석의 이론적 복잡성과 어려움에 비하여 철도교량위에 부설된 장대레일의 축력해석결과는 레일의 좌굴이 미미하여 기하적 비선형성이 미소하므로 그 예측이 가능하며 아주 단순하게 나타나게 된다. 본 연구는 교량상 장대레일의 축력해석에서 기하적 비선형성이 미소하여 해석 결과에 거의 영향을 미치지 못하므로 재료적 비선형성만을 고려하여 비선형해석을 수행하는 방법을 개발하였다. 이는 레일 체결 시스템의 비선형 저항력을 힘-변위 관계로부터 선형관계로 재구성시켜 선형해석법으로 수회 반복시키게 되면 간단하게 수렴됨으로 해석결과를 쉽게 얻을 수 있는 장점이 있다. 이러한 해석결과를 기존의 해석예들과 결과를 비교함으로서 효율적인 교량상 장대레일의 안정성 해석이 가능함을 알 수 있었다.

콘크리트궤도 부설 교량의 접속슬래브 단부 처짐한도에 관한 연구 (The Displacement Limit at the End of an Approach Slab for a Railway Bridge with Ballastless Track)

  • 최진유;양신추
    • 한국철도학회논문집
    • /
    • 제11권2호
    • /
    • pp.195-202
    • /
    • 2008
  • 교량과 토공의 접속부은 궤도의 대표적인 취약구간으로서 교대배면의 부등침하로 인한 궤도틀림발생이 빈번하여 유지관리에 많은 어려움을 겪고 있는 구간 중의 하나이다. 콘크리트궤도부설구간의 경우에는 교대배면의 부등침하를 방지하기 위하여 접속슬래브 부설이 일반화되고 있는 추세이다. 이 경우, 접속슬래브를 지지하고 있는 노반의 침하로 인하여 접속슬래브에 경사처짐이 발생하게 되면 궤도도 경사처짐이 발생하게 된다. 이로 인해 이 구간을 통과하는 차량의 주행안정성과 승차감의 저하, 그리고 과도한 충격에 의한 궤도의 손상을 유발하게 되므로 접속슬래브의 단부에서의 침하를 제한할 필요가 있다. 따라서 본 연구에서는 콘크리트 궤도 부설 교량과 토공의 접속부에 부설되는 접속슬래브의 단부에서의 처짐한도를 알아보기 위하여 접속슬래브의 길이와 단부처짐량을 매개변수로 한 차량-궤도 상호작용 해석을 실시하여 차체가속도, 윤중변동률, 레일 저부응력, 그리고 체결구에 발생하는 상향압력을 조사하였으며, 수치해석결과와 각 검토항목별 허용한도와의 비교검토를 통하여 접속슬래브의 길이에 따른 단부처짐의 허용한도를 제시하였다.

경전철 직결식 콘크리트 궤도구조의 열차주행안전성 평가 (Evaluation of Train Running Safety for Direct Fixation Concrete Track on Light Rapid Transit)

  • 최정열;김준형;정지승;이선길
    • 한국안전학회지
    • /
    • 제32권5호
    • /
    • pp.41-46
    • /
    • 2017
  • The coefficient of derailment and the rate of wheel load reduction were used as the index of train running safety that was directly affected the train derailment safety. In aspects of track, the train running safety depends on the complex interaction between wheel and rail, and the track-vehicle conditions (i.e., the curvature, cant, track system, vehicle speed and the operation conditions, etc). In this study, the relationship between the train running safety and the track curvature and vehicle speed for direct fixation concrete tracks currently employed in Korean light rapid transit was assessed by performing field tests using actual vehicles running along the service lines. The measured dynamic wheel load, lateral wheel load and lateral displacement of rail head were measured for same train running on four tested tracks under real conditions, which included curved and tangent tracks placed on the tunnel and bridge, thus increasing the train speed by approximately maximum design speed of each test site. Therefore, the measured dynamic track response was applied to the running safety analysis in order to evaluate the coefficient of derailment, the rate of wheel load reduction and the track gauge widening at each test site, and compare with the corresponding Korean train running safety standard. As the results, the lateral track response of direct fixation concrete track appeared to increase with the decreased track curvature; therefore, it was inferred that the track curvature directly affected the train running safety.