• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.6
• /
• pp.47-56
• /
• 2010

HDD-based RAIDs have been used in high-capacity storage systems for traditional data server. However, their data reliability are relatively low and they consume lots of power since hard disk drive is weak on shock and its power consumption is high due to frequent spindle motor operation. Therefore, this paper presents new SSD based RAID system architecture using various erasure codes. The proposed methode applys Reed-Solomon, EVENODD, and Liberation coding schemes onto file system level and device driver level, respectively. Besides, it uses data allocation method to minimize the side effect of reducing the lifespan of SSD. Detail experimental results show that Liberation code increase wear-leveling rates of SSD based RAID-6 more than other codes. The SSD based RAID system applying erasure codes at the device driver level shows better performance than that at the file system level. I/O performance of RAID-6 system using SSD is 4.5%~8.5% higher than that of using HDD and the power consumption of the RAID system using SSD is 18%~40% less than that of using HDD.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.105-113
• /
• 2013

RAID systems have been widely used by connecting several disks in parallel structure. to resolve the delay and bottleneck of data I/O. Recently, SSD based RAID systems are emerging since SSDs have better I/O performance than HDD. However, endurance and power consumption problems due to frequent write operation in SSD based RAID system should be resolved. In this paper, we propose a de-duplication method of parity disk in SSD based RAID system with expensive update cost. The proposed method segments chunk of parity data into small pieces and removes duplicate data, therefore, it can reduce wear-leveling and power consumption by decreasing write operation for duplicated parity data. Experimental results show that bit update rate of the proposed method is 16% in total disk, 31% in parity disk less than that of existing method in RAID-6 system using EVENODD erasure code, and the power consumption of the proposed method is 30% less than that of existing method. Besides the proposed method is 12% in total disk, 32% in parity disk less than that of existing method in RAID-5 system, and the power consumption of the proposed method is 36% less than that of existing method.

• KIISE Transactions on Computing Practices
• /
• v.23 no.6
• /
• pp.379-385
• /
• 2017

In enterprise environments, hybrid storage typically utilizes SSDs over disk-based RAID. Typically, SSDs over RAID are used as the data cache. Recently, the LeavO caching scheme was introduced to reduce the parity update overhead of the underlying RAID. In this paper, we combine the data caching and LeavO caching schemes and derive cost models of the combined cache to determine the optimal data and LeavO cache sizes. We also propose the Adaptive Combined Cache that dynamically adjusts the data cache and LeavO cache sizes for evolving workloads. Experimental results show that the performance of the Adaptive Combined Cache is significantly superior to that of the conventional data caching scheme and is comparable with that of the off-line optimal scheme.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.916-927
• /
• 2010

In this paper, we analyze the performance of the parity cache enabled RAID level-5 via the simulation. This RAID system consists of the DDR memory-based storage devices. To do this, we develop the simulation model and suggest the basic performance analysis data which we want to get via the simulation. And we implement the simulator based on the simulation model and execute the simulator. From the result of the simulation, we expect that the parity cache enabled RAID level-5 configured by the DDR memory based storage devices has the positive effectiveness to the enhancing of the storage system performance if the storage access patterns of applications are tuned.

• The KIPS Transactions:PartA
• /
• v.10A no.2
• /
• pp.83-92
• /
• 2003

RAID 5 is a widely-used technique used to construct disk systems of high reliability and performance. This paper proposes APGOC (Adaptive Parity Group On Cache) organization on cache to solve "small write" problem of RAID 5 especially in OLTP (On-Line Transaction Processing System) environments. In our approach, when user process makes a request for a file to kernel, the information on the read/write characteristics is added to the file data structure of the file system. With this information, data and parity cache can be managed interchangeably through parity fetching. Therefore we can enhance the cache utilization and improve the disk request response time. Our method is analyzed and evaluated with a simulation method. Comparing with previous works, we observed about 6~l3% of performance enhancement.hancement.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.21-30
• /
• 2011

In the global IT market, a lot of issues for responding to various environmental regulations emerged. In case of the data centers, it is consuming huge amounts of energy to maintain. So there have been various technical attempts as Consolidation, Virtualization, Optimization to efficiently manage energy and data storage to fix the problems. In this paper, we propose a new RAID(Redundant Array of Independent Disks) mechanism which is differing the intensity of power consumption and works to provide data protection and disaster recovery(backup, mirroring etc.) to stratify multiple volumes. G-RAID minimize the power consumption and the lower of I/O performance by selecting the volume depending on the frequency of data access while classifying the power consumption between volumes in storage system. Also, it is possible that a filesystem and block map information of G-RAID is processed by basic unit which is group located in a row for the blocks to work efficiently and can minimize the performance degradation of block mapping load by the access frequency in each groups. As a result, we obtained to elevate a little bit of response time caused by block relocation work, but showed the decrease of power consumption by 38%.

• The KIPS Transactions:PartD
• /
• v.10D no.6
• /
• pp.907-916
• /
• 2003

Database benchmarks require efficient of large-scale data. This presents the system architecture, control flows, and characteristics of the data generator we have developed. The data generator features generation of large-scale data, column-by-column data generation, a number of data distributions and verification, and real data generation. An extensive conparison with other data generators in terms of function is also presented. Finally, empirical performance experiments between RAID systems and non-RAID one have been conducted to alleviate I/O bottleneck. The test results can serve as guidelines to help confifure system architecture.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.3
• /
• pp.125-132
• /
• 2018

KVN(Korean VLBI Network) introduced the Mark6 system of the MIT haystack observatory as a recorder for data recording up to 32 Gbps for VLBI(Very Long Baseline Interferometry) observation. The Mark6 recorder can record data at up to 32Gbps when two systems and 64 HDDs are installed. However, because of the unique recording method that is characteristic of Mark6, we are introducing a large amount of data into a virtual file system, or using a general RAID method, which causes data loss when reading and transferring files at the highest recording speed or file system have. The Flexbuff system, a software recorder developed by JIVE(Joint Institute for VLBI ERIC), can be configured to operate as a data recorder through RAID configuration and network upgrades. In particular, when installed in the Mark6 system, it can record VLBI data at a maximum speed of 32 Gbps with less loss of data compared to the existing Mark6 by utilizing Mark6 resources well. In this paper, we propose that the existing Mark6 system can be operated as Mark6-Flexbuff by installing jive5ab software, and it is verified through experiment that it can be effectively used for VLBI observation operation through data recording test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1266-1272
• /
• 1997

Due to the price and performanceof uniprocessor workstations and off-the shelf networking, network of workstations(NOW) ae now a cost-effective parallel processing platform tht is competitive with supercomputers. Meanwhile, current network fiile system protocols rely heavily on a central server to coordinate file activity among client workstations. This central server can become a bottleneck that limits scalibility for environments with large numbers of clients. In this paper, we propsoe a highly reliable and effective software RAID file system on the network of workstation environment. We present results form a trace-driven simulation study that shows that the designed software RAID file system is more effective in the aspect of elapsed time when compared with client/server file systems.

• Transactions of the Society of Information Storage Systems
• /
• v.6 no.2
• /
• pp.41-46
• /
• 2010

Recently, Flash Memory Drives are one of the best media to support portable and desktop computers' storage devices. Their features include non-volatility, low power consumption, and fast access time for read operations, which are sufficient to present flash memories as major database storage components for desktop and server computers. However, we need to improve traditional storage management schemes based on HDD(Hard Disk Drive) and RAID(Redundant Array of Independent Disks) due to the relatively slow or freezing characteristics of write operations of SSDs, as compared to fast read operations. In order to achieve this goal, we propose a new storage management scheme called Hetero-Mirroring based on traditional HDD mirroring scheme. Hetero-Mirroring-based storage management improves RAID-1 operation performance by balancing write-workloads and delaying write operations to avoid SSD freezing.