• Nuclear Engineering and Technology
• /
• v.21 no.4
• /
• pp.321-331
• /
• 1989

A bench scale incineration process for the burnable radwaste has been constructed and operated at KAERI as a self-surpported development of incineration technology. The purposes of operating the process are to get experience in incineration, to analyze the characteristics of combustion and to test the performance of off-gas treatment units. Simulated paper and polyethylene wastes were incinerated. Volume reduction ratio and decontamination factor of the process have been determined to observe the economical efficiency and operational capability of the process. A methodology to estimate the acceptance limit of specific activity to an incineration facility by using a decontamination factor and to calculate the volume reduction ratio of the facility is introduced. The acceptance criteria for different radionuclides in the combustible waste at the bench scale incineration process are suggested using this methodology.

• Membrane Journal
• /
• v.25 no.6
• /
• pp.478-487
• /
• 2015

This review article indicated accident examples in the past and discussed dangerousness according to these examples. In addition, the ways to remove radioactive ions in radioactive waste, they were divided broadly and enumerated experimental case. These were many results of the experiment and patents used various ways complexly, but domestic technology prowess lower than foreign technology prowess. Even in case of accidents that could happen afterwards, it is essential for growth and competitiveness of domestic technology. Through this article, it considered today's technology for removing radioactive ions and was trying to find out about the possibility of development.

• Nuclear Engineering and Technology
• /
• v.54 no.11
• /
• pp.4030-4048
• /
• 2022

In this study, road transportation tests were conducted with surrogate fuel assemblies under normal conditions of transport to evaluate the vibration and shock load characteristics of spent nuclear fuel (SNF). The overall test data analysis was conducted based on the measured acceleration and strain data obtained from the speed bump, lane-change, deceleration, obstacle avoidance, and circular tests. Furthermore, representative shock response spectrums and power spectral densities of each test mode were acquired. Amplification or attenuation characteristics were investigated according to the load transfer path. The load attenuated significantly as it transferred from the trailer to the cask. By contrast, the load amplified as it transferred from the cask to the surrogate SNF assembly. The fuel loading location on the cask disk assembly did not exhibit a significant influence on the strain measured from the fuel rods. The principal strain was in the vertical direction, and relatively large strain values were obtained in spans with large spacing between spacer grids. The influence of the lateral location of fuel rods was also investigated. The fuel rods located at the side exhibited relatively large strain values than those located at the center. Based on the strain data obtained from the test results, a hypothetical road transportation scenario was established. A fatigue evaluation of the SNF rod was performed based on this scenario. The evaluation results indicate that no fatigue damage occurred on the fuel rods.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.9-17
• /
• 2007

In order to compare the correlation of radioactivity ratio between the radwaste streams and the primary coolant of PWR NPPs, A RCS sampling kit was installed to primary coolant system for the collection of the radionuclides during the normal operation of NPPs. RCS samples were collected from PWR type of domestic NPPs through 2004 to 2005, and pretreated with acid microwave digestion or leaching method to assay quantitatively of several interesting radionuclides. The radioactivity ratios of $^{137}Cs\;to\;^{60}Co$ in a filter cartridge and a resin cartridge were 2.3E-2 and 7.3E-1, respectively. At a same period of the reactor operating cycle, the radioactivity ratios of $^{137}Cs\;to\;^{60}Co$ were 6.3E-1 for a evaporator bottom, 6.7E-1 for a spent resin, and 5.6E-2 for a dry active waste, so that these radwaste streams were identified as having similar characteristics with the corresponding RCS samples.

• Tunnel and Underground Space
• /
• v.11 no.3
• /
• pp.257-269
• /
• 2001

Numerical simulation is performed to understand the structural behavior of an underground radwaste repository, assumed to be located at the depth of 500 m, in a granitic rock mats, in which a fault intersects the roof of the repository cavern. Two dimensional universal distinct element code, UDEC is used in the analysis. The numerical model includes a granitic rock mass, a canister with PWR spent fuels surrounded by the compacted bentonite inside the deposition hole, and the mixed bentonite backfilled in the rest of the space within the repository cavern. The structural behavior of three different cases, each case with a fault of an angle of $33^{\circ},\;45^{\circ},\;and\;58^{\circ}$ passing through the cavern roof-wall intersection, has been compared. And then fro the case with the $45^{\circ}$ fault, the hydro-mechanical, thermo-mechanical, and thermo-hydro-mechanical interaction behavior have been studied. The effect of the time-dependent decaying heat, from the radioactive materials in PWR spent fuels, on the repository and its surroundings has been studied. The groundwater table is assumed to be located 10m below the ground surface, and a steady state flow algorithm is used.

• Journal of Radiation Protection and Research
• /
• v.30 no.1
• /
• pp.17-25
• /
• 2005

Since the safety of nuclear power plant has been becoming a big social issue the exposure dose of radiation for workers has been one of the important factors concerning the safety problem. The existing calculation methods of radiation dose used in the planning of radiation work assume that dose rate does not depend on the location within a work space thus the variation of exposure dose by different work path is not considered. In this study, a modified numerical method was presented to estimate the exposure dose during radiation work in radwaste storage considering the effects of the distance between a worker and sources. And a new numerical algorithm was suggested to search the optimal work path minimizing the exposure dose in pre-defined work space with given radiation sources. Finally, a virtual work simulation program was developed to visualize the exposure dose of radiation doting radiation works in radwaste storage and provide the capability of simulation for work planning. As a numerical example, a test radiation work was simulated under given space and two radiation sources, and the suggested optimal work path was compared with three predefined work paths. The optimal work path obtained in the study could reduce the exposure dose for the given test work. Based on the results, tile developed numerical method and simulation program could be useful tools in the planning of radiation work.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.797-798
• /
• 2004

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.337-342
• /
• 1989

The control of a pH value in radwaste treatment process is difficult due to the nonlinearity of the titration curve and its strong sensivity to disturbances. This paper describes an adaptive control strategy which is model-based and allows for direct use of available measurements. This algorithm forces the nonlinear process to follow a desired linear system trajectory, and were applied to the control of a simulated pilot-scale pH process. The simulation study showed that it has the potential advantage over the transformation methods that control effort saturation can be accomodated readily.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.241-242
• /
• 2005

• Journal of the Korean Professional Engineers Association
• /
• v.38 no.1
• /
• pp.69-73
• /
• 2005

The text describes an author's column presented in a local newspaper, which includes the private warmest sentiments on the people and hometown, sending a message to try to cause the peopleinduce that project to their district, known as one of the candidates. Since in 1986, the siting work for a potential district of the RDF(Radwaste Disposal Facility) Project Center in Korea has been struggled for almost 20 years. Unfortunately, the final district could not be fixed yet. So, during last tow years, author has been personally endeavored to do all activities in concern with that work as a pioneer and experienced in that field.