• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.211-218
• /
• 2012

Two experiment are planed to identify driver's safe driving behaviour by curve radius, road surface condition in curve section. At four-lane and two-lane road, conducted experiments are check on driver's feeling of safety that 30 subjects do not feel discomfort. And using the data from these experiments, this study compare physical speed (not slipping, fall our of the road) with safety driving speed(drivers felt a comfortable and safe speed) each curve radius and fiver road surface condition(drying, wet, rain, snow and ice). As a result, safe driving behaviour factors that are derived to curve radius of 100m units, five road surface conditions enable to represent quantitative analysis of driver's discomfort. This study will develop road design method and evaluation reflected ergonomic aspects.

• Geomechanics and Engineering
• /
• v.13 no.2
• /
• pp.285-300
• /
• 2017

Shallow coal resources are increasingly depleted, the mining has entered the deep stage. Due to "High stress, high gas, strong adsorption and low permeability" of coal seam, the gas drainage has become more difficult and the probability of coal and gas outburst accident increases. Based on the flow solid coupling theory of coal seam gas, the coupling model about stress and gas seepage of coal seam was set up by solid module and Darcy module in Comsol Multiphysics. The gas extraction effects were researched after applying hydraulic technology to increase permeability. The results showed that the effective influence radius increases with the expanded borehole radius and drainage time, decreases with initial gas pressure. The relationship between the effective influence radius and various factors presents in the form: $y=a+{\frac{b}{\left(1+{(\frac{x}{x_0})^p}\right)}}$. The effective influence radius with multiple boreholes is obviously larger than that of the single hole. According to the actual coal seam and gas geological conditions, appropriate layout way was selected to achieve the best effect. The field application results are consistent with the simulation results. It is found that the horizontal stress plays a very important role in coal seam drainage effect. The stress distribution change around the drilling hole will lead to the changes in porosity of coal seam, further resulting in permeability evolution and finally gas pressure distribution varies.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.2
• /
• pp.66-73
• /
• 2008

Present study examines the detonation wave propagation characteristics in annular channels. Numerical approaches used in the previous studies were extended with marching windows technique. Parametric study has been carried out using a radius of curvature normalized by the channel width considered as unique geometric parameter. In the channels of small radius of curvature, detonation wave is unstable and the regular cell structure is not observed. There is a critical radius of curvature where cell structure can be sustained. The effect of curvature makes the pressure difference on inner and outer surfaces where the detonation wave is overdriven. The results converge to that of straight channel as the radius of curvature gets larger, as expected.

• Journal of Environmental Science International
• /
• v.18 no.3
• /
• pp.271-281
• /
• 2009

In order to reduce the uncertainties and improve the air flow field, objective analysis using observational data is chosen as a method that enhances the reality of meteorology. To improve the meteorological components, the radius influence and nudging coefficient of the objective analysis should perform a adequate value on complex area for the objective analysis technique which related to data reliability and error suppression. Several numerical experiments have been undertaken in order to clarify the impacts of the radius influence and nudging coefficient of the objective analysis on meteorological environments. By analyzing practical urban ground conditions, we revealed that there were large differences in the meteorological differences in each case. In order to understand the quantitative impact of each run, the Statistical analysis by estimated by MM5 revealed the differences by the synoptic conditions. The strengthening of the synoptic wind condition tends to be well estimated when using quite a wide radius influence and a small nudging coefficient. On the other hand, the weakening of the synoptic wind is opposite.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.505-513
• /
• 2017

In this study, we collected 200,578,703 geo-tweets and removed the twitter bots. Using the concept of activity radius, Twitter users are classified. Users are also divided first into domestic and overseas, and again domestic ones are divided into locals and non-locals. Statistical characteristics of activity strength and active area of Twitter users are described according to activity radius and home region, and the geographical distribution is presented visually. Through a case study of Las Vegas, we have identified the difference in activity strength and active area by the user's home residence. We expect to derive theories about human mobility by analyzing various cities with the method proposed in this study.

• Journal of computational fluids engineering
• /
• v.20 no.1
• /
• pp.39-46
• /
• 2015

In this research, we studied the pressure drop affecting on the internal surface roughness and the curvature radius of a U-tube, which is used for the cooling system in PWR(Pressurized Water Reactor). Using ANSYS-FLUENT, a commercial code based on CFD(Computational Fluid Dynamics) technique, we compared a Moody chart with the Darcy friction factor changed by a range of various surface roughness and Reynolds numbers of a straight pipe model. We studied the effect giving variation about a range of various surface roughness and the curvature radius of the full scale U-tube model. The material of the heat transfer tube is Inconel 690 used in the steam generator. We compared the velocity distribution of selected 4 locations, and derived the correlation between the surface roughness and the pressure drop for the U-tube of each representative curvature radius using the linear regression method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1495-1508
• /
• 1990

There are requirement of surface roughness in mechanical elements that has minute surface of several nm degree. When high precision surface roughness measurement is made with stylus type surface roughness measuring apparatus, measuring accuracy depend on the tip radius of diamond stylus. Therefore, ultra precision machining was accomplished using ion sputter machining in order to machining the stylus tip radius less than 0.5.mu.m, which is impossible through lapping machining. In this study, optimal machining condition for the ion sputter machining was obtained through the experiment under the various varing machinbing quantity and condition of diamond stylus. And as the result of applying this optimal condition, the good result was obtained that machining probability of stylus tip radius less than o.5.mu.m is 93%.

• Computers and Concrete
• /
• v.25 no.5
• /
• pp.411-425
• /
• 2020

In this paper, the shell material has been taken as functionally graded material and their material quantity is located by the exponential volume fraction law. Moreover, the impact of ring supports around the shell circumference has been examined for their various positions along the shell axial length. These rings support restraints the radial displacement in the transverse direction. While the axial modal deformation functions have been estimated by characteristic beam functions and nature of materials used for construction of cylindrical shells. The fundamental natural frequency of cylindrical shell of parameter versus ratios of length- and height-to-radius for a wide range has been reported and investigated through the study. In addition, by increasing height-to-radius ratio resulting frequencies also increase and frequencies decrease on ratio of length-to-radius. Though the trends of frequency values of both ratios are converse to each other with three different boundary conditions. Also it is examined the position of ring supports with length-to radius ratio, height-to-radius ratio and varying the exponent of volume fraction. MATLAB software package has been utilized for extracting shell frequency spectra. The obtained results are confirmed by comparing with available literature.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.5
• /
• pp.585-595
• /
• 2007

Representative impacts and effectiveness of surface meteorological observation data assimilation were examined in order to use wind resources estimation around southern coastal area of the Korean Peninsula. The data used in study are observational wind and temperature data at 5 and 41 sites of Regional Meteorological Offices and Automatical Weather Systems, respectively. Observation wind speed data tends to show small effective radius with limited area. Especially assimilation impacts of data observed at peninsula type sites like Yeosu play only around the inside of the peninsula. This limited effective radius for wind speed is caused by the strong correlation between topography and wind speed. And the efficient radius for surface air temperature is larger than that of wind. Data assimilation for observational air temperature is useful to increase the accuracy of wind energy estimation. However assimilation of wind data requires special care in its application due to high sensitivity of topographical complexity.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.2
• /
• pp.114-120
• /
• 2005

This paper presents a novel method for radius measurement of fillet regions of polygonal models by using optimum onhogonal planes. The objective function for finding an optimum onhogonal plane is designed based on the orthogonality between the normal vectors of the faces in a filet region and the plane that is to be found. Direct search methods are employed to solve the defined optimization problem since no explicit derivatives of the object function can be calculated. Once an optimum orthogonal plane is obtained, the intersection between the onhogonal plane and the faces of interest is calculated, and necessary point data in the fillet region for measuring radii are extracted by some manipulation. Then, the radius of the fillet region in question is measured by least squares fitting of a circle to the extracted point data. The proposed radius measuring method could eliminate the burden of defining a plane for radius measurement, and automatically find a necessary optimum orthogonal plane. It has an advantage in that it can measure fillet radii without prior complicated segmentation of fillet regions and explicit information of neighboring surfaces. The proposed method is demonstrated trough some mea-surement examples.