• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.402-408
• /
• 2013

PURPOSE. The aim of this study was to evaluate the surface properties and in vitro bioactivity to osteoblasts of magnesium and magnesium-hydroxyapatite coated titanium. MATERIALS AND METHODS. Themagnesium (Mg) and magnesium-hydroxyapatite (Mg-HA) coatings on titanium (Ti) substrates were prepared by radio frequency (RF) and direct current (DC) magnetron sputtering.The samples were divided into non-coated smooth Ti (Ti-S group), Mg coatinggroup (Ti-Mg group), and Mg-HA coating group (Ti-MgHA group).The surface properties were evaluated using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The surface roughness was evaluated by atomic force microscopy (AFM). Cell adhesion, cell proliferation and alkaline phosphatase (ALP) activity were evaluated using MC3T3-E1 cells. Reverse transcription polymerase chain reaction (RT-PCR) analysis was performed. RESULTS. Cross-sectional SEM images showed that Mg and Mg-HA depositionson titanium substrates were performed successfully. The surface roughness appeared to be similaramong the three groups. Ti-MgHA and Ti-Mg group had improved cellular responses with regard to the proliferation, alkaline phosphatase (ALP) activity, and bone-associated markers, such as bone sialoprotein (BSP) and osteocalcin (OCN) mRNA compared to those of Ti-S group. However, the differences between Ti-Mg group and Ti-MgHA group were not significant, in spite of the tendency of higher proliferation, ALP activity and BSP expression in Ti-MgHA group. CONCLUSION. Mg and Mg-HAcoatings could stimulate the differentiation into osteoblastic MC3T3-E1 cells, potentially contributing to rapid osseointegration.

• 한국진공학회지
• /
• 제9권3호
• /
• pp.258-262
• /
• 2000

$YMnO_3$박막은 고주파 스퍼터를 사용하여 Si(100)과 $Y_2O_3$/si(100)기판에 증착하였다. 증착시에 산소 분압의 조건과 열처리 온도는 YMnO$_3$ 박막의 결정성과 그 메모리 윈도우의 특성에 매우 중요한 영향을 주었다. XRD 측정 결과 산소 분압 0%에서 증착후 $870^{\circ}C$에서 1시간 동안 후열처리한 $YMnO_3$ 박막은 c-축을 따라 매우 잘 배향되었음을 확인하였다. 반면 산소분압 20%에서 Si(100)과 $Y_2O_3$/Si(100) 기판위에 증착된 $YMnO_3$박막의 결정화는 XRD측정 결과 $Y_2$O$_3$ peak가 보이는 것으로 보아 YMnO$_3$박막내에 과잉의 $Y_2O_3$가 c-축으로의 배향을 억제하는 것을 알 수 있다. 특히 산소분압 0%에서 증착한 Pt/$YMnO_3/Y_2O_3$/Si 구조에서의 메모리 윈도우 특성은 c-축으로 잘 배향된 결과로 인해 인가전압 2~12V에서 0.67-3.65V이었으며 이는 $Y_2O_3$/si 기판위에 산소분압 20%에서 증착한 박막 (0.19~1.21V)보다 동일한 인가전압에서 3배 정도의 큰 메모리 윈도우 특성을 보였다.

• 한국표면공학회지
• /
• 제56권2호
• /
• pp.147-151
• /
• 2023

Transparent ZnO (100 nm thick) and ZnO/Ti/ZnO (ZTZ) films were prepared with radio frequency (RF) and direct current (DC) magnetron sputtering on the glass substrate at room temperature. During the ZTZ film deposition, the thickness of the Ti interlayer was varied, such as 6, 9, 12, and 15 nm, while the thickness of ZnO films was kept at 50 nm to investigate the effect of the Ti interlayer on the crystallization and opto-electrical performance of the films. From the XRD pattern, it is concluded that the 9 nm thick Ti interlayer showed some characteristic peaks of Ti (200) and (220), and the grain size of the ZnO (002) enlarged from 13.32 to 15.28 nm as Ti interlayer thickness increased. In an opto-electrical performance observation, ZnO single-layer films show a figure of merit of 1.4×10^-11 Ω^-1, while ZTZ films with a 9 nm-thick Ti interlayer show a higher figure of merit of 2.0×10^-5 Ω^-1.