• Korea-Australia Rheology Journal
• /
• v.17 no.2
• /
• pp.47-62
• /
• 2005

The present study deals with a mathematical model describing the dynamic response of heat and mass transfer in blood flow through bifurcated arteries under stenotic condition. The geometry of the bifurcated arterial segment possessing constrictions in both the parent and the daughter arterial lumen frequently appearing in the diseased arteries causing malfunction of the cardiovascular system, is formulated mathematically with the introduction of the suitable curvatures at the lateral junction and the flow divider. The blood flowing through the artery is treated to be Newtonian. The nonlinear unsteady flow phenomena is governed by the Navier-Stokes equations while those of heat and mass transfer are controlled by the heat conduction and the convection-diffusion equations respectively. All these equations together with the appropriate boundary conditions describing the present biomechanical problem following the radial coordinate transformation are solved numerically by adopting finite difference technique. The respective profiles of the flow field, the temperature and the concentration and their distributions as well are obtained. The influences of the stenosis, the arterial wall motion and the unsteady behaviour of the system in terms of the heat and mass transfer on the blood stream in the entire arterial segment are high­lighted through several plots presented at the end of the paper in order to illustrate the applicability of the present model under study.

• Journal of the Korean Magnetics Society
• /
• v.24 no.3
• /
• pp.90-96
• /
• 2014

The magnetic field variation by the permanent magnet fluctuation positioned on a "Chwan" of wrist according to the movement of radial artery was generated. The clip-type pulsimeter equipped with a Hall device sensing magnetic field pulse movement analyzed the characteristics of pulse wave as output signals. The magnetic field curve and pulse waveform simulated by the finite element method were compared and analyzed with each other. Also, the variation of magnetic field distribution one permanent magnet investigated by the fabrication of clip-type pulsimeter simulator. This result suggests that the clip-type pulsimeter can be used the reproducible and efficacious oriental diagnostic medical instrument.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.11 no.1
• /
• pp.240-250
• /
• 1998

Background: Ginkgo biloba extract is used in disorser of cerebral and peripheral blood circulation, dysfunction of brain, atherosclerosis etc., but there are little study about GbE in oriental medicine. We wished to assessthe efficacy of GbE for the treatment of cerebral infarction Method : The study group comprised 40 patients who arrived at hospital during 48 hours after attack. All patient were devided into two group. The control group was treated with Uhuangcheongsimhuan, Seonghyangjeonggisan, acupuncture therapy only, while the GbE group was treated with above therapy plus 5 days of administration of GbE(40mg three times per day). Result: 1. Symptom improve scores did not showed significant difference between control and GbE group. 2. Vasoreactivity of carotid siphon increased significantly in GbE group after treatment (in the left only : p<0.05). 3. Vasorcactivity of radial artery increased significantly in GbE group after treatment(in the right only ; p<0.05). 4. PT, a-PTT, Fibrinogen did not showed significant changes between before and after treatment in both group. Conclusion: These findings suggest that vasoreactivity increasing effect of GbE may be useful in the prevention and treatment of cerebral infarction. But the vasoreactivity increasing effect of GbE may be different from symptom imroving.

• Journal of Sensor Science and Technology
• /
• v.25 no.1
• /
• pp.35-40
• /
• 2016

Pulse diagnosis is one of the representative diagnostic methods in Oriental medicine. In this study, a pulse pressure sensor array coated with silicone, which includes 6 piezo-resistive sensors and 1 thermistor, is fabricated for pulse measurement. It is necessary to coat the pulse sensor array with silicone to avoid the fracture or damage of pressure sensors when the sensor is in contact with the skin and a constant pressure is applied. However, the silicone coating on the pulse sensor array can cause signal interference among the sensors in the pulse sensor array. The interference number (IN), a calculation for expressing the degree of interference among channels, is changed according to the silicone thickness on the pulse sensor array. The IN is increased by a thick silicone coating, but the fabrication error, an important index for the mass production of the sensor array, is reduced by the thickness of the silicone coating. We propose that the thickness of the silicone on the pulse sensor array is an important consideration for the performance of the fabricated sensor and manufacturing repeatability.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.3
• /
• pp.171-176
• /
• 2013

In this paper, we present a MEMS (micro-electro-mechanical system) implantable blood pressure sensor which has designed and fabricated with consideration of size, design flexibility, and wireless detection. Mechanical and electrical characterizations of the sensor were obtained by mathematical analysis and computer aided simulation. The sensor is composed of two coils and a air gap capacitor formed by separation of the coils. Therefore, the sensor produces its resonant frequency which is changed by external pressure variation. This frequency movement is detected by inductive coupling between the sensor and an external antenna coil. Theoretically analyzed resonant frequency of the sensor under 760 mmHg was calculated to 269.556 MHz. Fused silica was selected as sensor material with consideration of chemical and electrical reaction of human body to the material. $2mm{\times}5mm{\times}0.5mm$ pressure sensors fitted to radial artery were fabricated on the substrates by consecutive microfabrication processes: sputtering, etching, photolithography, direct bonding and laser welding. Resonant frequencies of the fabricated sensors were in the range of 269~284 MHz under 760 mmHg pressure.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1914-1915
• /
• 2007

The period and strength of the pulse on the radial artery are important physiological factors, and they have been used to diagnosis in both Western and Eastern countries for a long time and has been developed as a unique method of diagnosis at each countries. Recently, there are a lot of systems which can give diagnosis information by recording the pulse wave and analyzing the characteristics of the pulse shape. This study describes the Pulse-Wave Measurement System which is able to measure the pulse wave signal using piezoresistive sensor and the pulse wave signal measured by the developed system is transmitted to a computer on the basis of the USB Driver. It has finally shown the the pulse wave signal measured by the sender is appeared to the host PC in real time. The Pulse-Wave Measurement System used the piezoresistive sensor to measure the pulse wave signal and the differential amplifier(AD620) to amplify the pulse wave signal which is small signal. And it used the ADC to convert analog to digital for the measured analog signal and the interface with a computer. It transmitted the measured pulse signal through USB transmission module to the host computer and Labview tool shows it. This Pulse-Wave measurement system will afford comvenience of detecting pulse wave to user related to oriental medicine.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.149-154
• /
• 2009

By increasing people's average life span, interest for health is highly growing. According to hoping to check their body condition, people have a medical checkup periodically to check their condition. But, they can prevent disease or are able to make a health care through checking people's pulse or blood pressure. In this paper, two different pulse measurement systems were developed, one system using a photosensor which is able to measure transmissivity's change through blood volume and another system using a piezo-electric sensor which can measure pulse when it measures radial artery's pressure in the wrist are realized. We compared two systems each other.

• Journal of Chest Surgery
• /
• v.31 no.2
• /
• pp.118-124
• /
• 1998

Minimally invasive coronary artery bypass grafting without using cardiopulmonary bypass (CPB) is a recently accepted modality of myocardial revascularization prcedures which is particularly suitable to the patients with lesions in the left anterior descending(LAD) and the right coronary arteries. Of the consecutive 35 patients of coronary artery bypass grafting performed at Sejong General Hospital from March to August 1996, six patients underwent minimally invasive coronary artery bypass grafting without CPB. All had stenotic lesions of the LAD more than 90%. Bypass grafting of the LAD was approached through midline sternotomy in one, through ministernotomy in two, and through limited left anterior thoracotomy in three patients, respectively. The internal mammary arteries were prepared without the use of thoracoscope. The mobilized mammary arteries were connected directly to the LAD in 5 patients, and the anastomosis required interposition of a segment of the radial artery in the remaining one. The diagonal branch was revascularized with the saphenous vein graft at the same time in one patient. No blood transfusion was necessary in 2 patients, and average blood required during surgery was 800ml in 4 patients. All patients were extubated from 4 to 14 hours(mean 9 hours) after operation. Early postoperative coronary angiography in 5 patients between 7 and 10 days after surgery has proved full patency of the grafts. With these limited clinical experiences, the clinical results demonstrated that minimally invasive coronary artery bypass grafting without CPB is an useful procedure especially in patients with isolated lesion in the proximal LAD.

• Journal of Chest Surgery
• /
• v.39 no.10 s.267
• /
• pp.759-764
• /
• 2006

Background: We analyzed post-operative angiography performed in symptomatic patients to evaluate the patency rates and the roles of grafts. Material and Method: We reviewed 52 (15%) coronary angiograms performed for recurrent angina after prior coronary artery bypass surgery from January 1995 to June 2005. A total of 345 patients underwent coronary artery bypass surgery during this period. There were 41 men and 11 women and the mean age was $64.07{\pm}15.58$ years. The median period from operation to re-angiogram was 68.5 months (range, 1 to 126 months). The numbers of grafts and peripheral anastomoses were 42 and 43 for internal thoracic artery (ITA), 14 and 20 for radial artery (RA), and 49 and 89 for saphenous vein. The mean number of anastomosis was 2.9 per patient, Result: The patency rates of ITA, RA and saphenous vein graft (SVG) were 37/43 (86%), 17/20 (85%) and 34/89 (38.2%). The patency rate of arterial grafts was significantly higher than that of SVG (p< 0.001) and the patency rate of the RA was comparable to that of ITA (p=0.942). The patency rate of sequential SVGs was higher than that of single SVG (40.3% vs 31.8%, p=0.478) and the patency rate of proximal segments in sequential anastomosis was higher than that in single anastomsis (55.6% vs 31.8%, p=0.097), but statistically not significant. Conclusion: Arterial grafts have markedly superior patency rates than SVGs, so consideration should be given to the vigorous use of arterial grafts. The patency rate of the RA was comparable to that of ITA.

• Journal of Acupuncture Research
• /
• v.21 no.2
• /
• pp.1-20
• /
• 2004

Objective : The aim of this study was to investigate effects of Angelica gigas Nakai(AGN) on the ischemic injury by intraluminal filament insertion in the rats. Methods : The ischemia was induced by intraluminal filament insertion into middle cerebral artery. AGN herbal acupuncture into SP10 was carried out during 3 weeks after ischemic injury. Eight-arm radial maze was designed for the behavioral task. AGN herbal acupuncture showed neuroprotective agents in cresyl violet, acetylcholinesterase(AchE), choline acetyltransferase(ChAT) and nerve growth factor(NGF)-stain. Then check the effect of regional cerebral blood flow(rCBF) according to AGN herbal acupuncture in rats. Results : The errors in the eight-arm radial maze task were significantly decreased in normal group compared with control group on 1~6days, AGN2(0.02g/kg) herbal acupuncture group on 1~5days, AGN3(0.1g/kg) on 1~3days, AGN4(0.5g/kg) on 1, 3~6days. The rate of correct choice was significantly increased in AGN1(0.01g/kg) and AGN4 herbal acupuncture groups. The density of neurons in the hippocampal CA1 was the most increased in normal group and AGN1, AGN3, AGN4 herbal acupuncture groups compared with control group. The density of AchE in the hippocampal CA1 had a tendency to increase in all the groups when they were compared with control group, but not significant. The density of ChAT in the hippocampal CA1 was significantly increased in normal group and AGN1, AGN4 herbal acupuncture groups compared with control group. The density of NGF in the hippocampal CA1 was significantly increased AGN4 herbal acupuncture group compared with control group. The rCBF was significantly increased in AGN1, AGN3 and AGN4 herbal acupuncture groups without the change of blood pressure. Conclusions : These results suggest that AGN herbal acupuncture can be used for controlling stroke in early stage as herbal medication.