• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.360-363
• /
• 2005

To detect falcarinol in Acanthopanax senticosus, its stem and bark were extracted with methanol fractionated with petroleum ether and diethyl ether, and separated by silica gel column chromatography, Resulting six crude samples were compared with standard falcarinol through TLC on silica gel plates. Fraction 6 showed $R_{f}$ value of 0.46 similar to that of standard falcarinol. Through analytical reverse phase HPLC/PDA, UV spectra of standard falcarinol and traction 6 recorded between 200 and 340 nm showed identical peaks and UV spectra patterns. GC/MS revealed standard falcarinol and fraction 6 have equal retention times of 7.4 and 8.5 min before and after TMS-derivatization, respectively. Standard falcarinol and fraction 6 showed more similar spectrum patterns after TMS-derivatization than before. These results confirm presence of falcarinol in A. senticosus.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.11-18
• /
• 2021

The small radio frequency tracking radar is a tracking system with a radio frequency sensor that identifies a target through all-weather radio frequency signal processing for a target and searches, detects and tracks the target for the major target. In this paper, we describe the development of a board equipped with TMS320C6678 and XILINX FPGA (Field Programmable Gate Array), a high-speed multi-core DSP that acquires target information through all-weather radio frequency and identifies a target through real-time signal processing. We propose DSP-FPGA combination architecture for DSP and FPGA selection and signal processing, and also explain the design of SRIO for high-speed data transmission.

• Journal of Magnetics
• /
• v.20 no.1
• /
• pp.52-56
• /
• 2015

The purpose of the current study was to investigate the effect of repetitive transcranial magnetic stimulation (rTMS) in conjunction with mirror therapy on the balance function of patients with sub-acute stroke hemiparesis. This study was conducted with 36 subjects who were diagnosed with a hemiparesis due to stroke. Participants in the experimental (19 members) and control groups (17 members) received rTMS and sham rTMS during 10 minute sessions each, which were carried out five days per week for four weeks. This was followed by the mirror therapy over 30 minute sessions, which were carried out five days per week for four weeks. Motor recovery was assessed by balance index, dynamic limits of stability, Berg balance scale, and time up go test. The change values of the balance index ($-2.06{\pm}1.99$ versus $-0.41{\pm}1.11$), dynamic limits of stability ($3.68{\pm}2.71$ versus $1.17{\pm}2.38$), and time up go test ($-7.05{\pm}5.64$ score versus $-3.35{\pm}5.30$ score) were significantly higher in the experimental group than in the control group (p < 0.05). At post-test, balance index ($4.08{\pm}1.14$ versus $5.09{\pm}1.04$), dynamic limits of stability ($13.75{\pm}0.60$ versus $11.73{\pm}3.53$), and time up go test ($23.89{\pm}4.51$ versus $28.82{\pm}3.07$) were significantly higher in the experimental group than in the control group (p < 0.05). In the experimental group, significant differences were found in the pre- and post-test scores for the balance index, dynamic limits of stability, Berg balance scale, and time up go test (p < 0.01). In the control group, a significant difference was observed between the pre- and post-test only for the Berg balance scale and time up go test (p < 0.05). These findings demonstrate that the application of 1Hz rTMS in conjunction with mirror therapy can be helpful in improving the balance function of patients with sub-acute stroke hemiparesis, and this may be used as a practical adjunct to routine rehabilitation therapy.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.4
• /
• pp.276-285
• /
• 2003

In this paper, we present real-time implementation of a R2MFC/DTMF (R2 Multi Frequency Combinations/Dual Tone Multiple Frequency) tone receiver/sender using a high performance DSP (Digital Signal Processor) and apply it to a carrier class VoIP (Voice over Internet Protocol) gateway system. The Receiver utilizes the Goertzel filter and the sender adopts the harmonic resonant filter. We describe, in detail, the techniques of multi-channel real-time implementation on a Texas Instruments TMS320C62x DSP such as effective PCM (Pulse Code Modulation) in/out by means of DMA (Direct Memory Access) and McBSP (Multi Channel Buffered Serial Port) and message communication via HPI (Host Port Interface), etc. From experimental results, we confirmed that the optimized code provided 780 channel capacity at 250㎒ C6202, and the our R2MFC/DTMF receiver/sender met ITU-T (International Telecommunication Union-Telecommunication) specifications.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1
• /
• pp.1-9
• /
• 2009

This paper deals with the realization of multi-channel live karaoke. In this study, 6-channel MP3 decoding and tempo/key scaling was operated in real time by using the TMS320C6713 DSP, which is 32 bit floating-point DSP made by TI Co. The 6 channel consists of front L/R instrument, rear L/R instrument, melody, and woofer. In case of the 4 channel, rear L/R instrument can be replaced with drum L/R channel. And the final output data is generated as adjusted to a 5.1 channel speaker. The SOLA algorithm was applied for tempo scaling, and key scaling was done with interpolation and decimation in the time domain. Drum channel was excluded in key scaling by separating instruments into drums and non-drums, and in processing SOLA, high-quality tempo scaling was made possible by differentiating SOLA frame size, which was optimized for real-time process. The use of 6 channels allows the composition of various channels, and the multi-channel audio system of this study can be effectively applied at any place where live music is needed.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1066-1068
• /
• 1996

This paper concerns about the active noise canceller via filtered-X LMS algorithm. There are various kinds of algorithms to implement a active noise canceller. Traditional LMS algorithms are not enough to implement a sharp noise cancellation characteristics. We simulates a filtered-X LMS algorithm and implements an algorithm to the TMS320C5x DSP processor and shows that result.

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.2
• /
• pp.83-89
• /
• 2010

Diamond-like carbon (DLC) coating was studied to be a good tribological problem-solver due to its low friction characteristics and high hardness. However, generally hydrogenated DLC film has shown a weak thermal stability above $300^{\circ}C$. However, the silicon doping DLC process by DC pulse plasma enhanced chemical vapor deposition (PECVD) for the new DLC coating which has a good characterization with thermal stability at high temperature itself has been observed. And we were discussed a process for optimizing silicon content to promote a good thermal stability using various tetramethylsilane (TMS) and methane gas at high-temperature. The chemical compositions of silicon-containing DLC film was analyzed using X-ray photoelectron spectroscopy (XPS) before and after heat treatment. Raman spectrum analysis showed the changed structure on the surface after the high-temperature exposure testing. In particular, the hardness of silicon-containing DLC film showed different values before and after the annealing treatment.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.219-226
• /
• 2003

In this paper, it is presented a new scheme of adaptive-neuro control system to implement real-time control of robot manipulator. Unlike the well-established theory fir the adaptive control of linear systems, there exists relatively little general theory fir the adaptive control of nonlinear systems. Adaptive control technique is essential fir providing a stable and robust performance fir application of robot control. The proposed neuro control algorithm is one of teaming a model based error back-propagation scheme using Lyapunov stability analysis method. Through simulation, the proposed adaptive-neuro control scheme is proved to be a efficient control technique f3r real-time control of robot system using DSPs.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.518-520
• /
• 2007

본 논문에서는 주택용 3kW급 태양광발전 계통연계형 인버터에 대하여 설명한다. 기존에 생산된 승압형 DC-DC 컨버터를 추가한 인버터와 토폴로지는 같으나, 설치 장소의 제약을 받지 않도록 실외형 시스템으로 개선하였다. 또한, TMS320F2812, discrete IGBT등의 주요 소자를 채택하여 소형, 경량화 하였고, EMI 노이즈를 저감시켰다.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.131-133
• /
• 2001

The basic function of a Power-System Stabilizer(PSS) is to add damping to the generator rotor oscillations by controlling its excitation using auxiliary stabilizing signals. To provide damping. the stabilizer must produce a component of electrical torque in phase with the rotor speed deviations. This paper introduces the hardware specifications and various functions of microprocessor (TMS320C32)-based digital PSS to provide the damping torque.