• Analytical Science and Technology
• /
• v.28 no.4
• /
• pp.255-259
• /
• 2015

A technique on the determination of Co(II) in aqueous samples with quinalizarin-β-cyclodextrin inclusion complex was developed. The conditions such as pH of the sample solution, the concentration of quinalizarin and the concentration of β-CD were optimized to 11.3(±0.2), 1.2×10⁻⁶ M and 8.0×10⁻⁶ M, respectively. Under these optimum conditions, the calibration curve of Co(II) was obtained over concentration range of 5.0×10⁻⁹ ~ 1.2×10⁻⁷ M. The detection limit was 4.2×10⁻⁹ M (0.25 ng/mL). For validating this proposed technique, aqueous samples(stream water, reservoir water and tap water) were used. Recovery yields of 95~105% were obtained. The relative standard deviation(%) in aqueous samples were less than 7.0%. Based on experimental results, it is proposed that this technique can be applied to the practical determination of Co(II).

• Applied Biological Chemistry
• /
• v.32 no.1
• /
• pp.37-43
• /
• 1989

Some phenolics were examined as an antioxidant for the autoxidation of soybean oil. Soybean oil was autoxidized under a mild condition (the flow rate of 67ml $O_{2}/min$ and $50^{\circ}C$). The antioxidant effect was estimated by active oxygen method. Phenolics show distinctive antioxidant effect, and the effect is prominent when cupper or iron was added. Phenolics showed a tendency to increase antioxidant effect with an increase of the number of hydroxyl group, and the increasing order was ferulic acid, quinalizarin, sesamol, alizarin, fisetin and purpurogallin. However, the effect was remarkably low in ferulic acid, alizarin and quinalizarin. It was found that the antioxidant effect was dependent on the functional group and geometric molecular structure of phenolics.

• Journal of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.534-538
• /
• 1991

A procedure for spectrophotometric determination of traces of boron in high-purity trichlorosilane (TCS) is proposed utilizing an adsorptive separation. NaCl is chosen as an Lewis base adsorbent which forms a complex with boron compounds in TCS, and is well dissolved in sulfuric acid-quinalizarin color-forming agent without causing an interference in colorimetric measurements. The proposed adsorptive separation method is free from the formation of silica gel and gas bubbles during the analysis of TCS. The method reveals that the boron concentration in a semiconductor grade TCS is 6.1 ${\mu}$g/l within the standard deviation of ${\pm}$20%. On the other hand, the boron concentration of the purified TCS which is separated from NaCl-boron compounds complex is reduced to 0.2 ${\mu}$g/l, showing the efficient applicability of NaCl to the adsorptive separation. The effectiveness of NaCl for the removal of boron in TCS purification is also described in comparison with other well-known adsorbents.