• Structural Engineering and Mechanics
• /
• v.53 no.3
• /
• pp.411-427
• /
• 2015

Based on linear elastic theory of quasicrystals, various equations and solutions for quasicrystal beams are deduced systematically and directly from plane problem of two-dimensional quasicrystals. Without employing ad hoc stress or deformation assumptions, the refined theory of beams is explicitly established from the general solution of quasicrystals and the Lur'e symbolic method. In the case of homogeneous boundary conditions, the exact equations and exact solutions for beams are derived, which consist of the fourth-order part and transcendental part. In the case of non-homogeneous boundary conditions, the exact governing differential equations and solutions under normal loadings only and shear loadings only are derived directly from the refined beam theory, respectively. In two illustrative examples of quasicrystal beams, it is shown that the exact or accurate analytical solutions can be obtained in use of the refined theory.

• 한국전자현미경학회:학술대회논문집
• /
• 2000.11a
• /
• pp.68-68
• /
• 2000

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.141.2-141.2
• /
• 2008

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.641-642
• /
• 2006

Two-dimensional (2D) photonic quasicrystals (PQCs) were fabricated by a holographic nanolithography techniques. Using two laser beams with different angles incident on the sample, micro-cavities with 2D internal nanostructures are patterned with a few micrometer periods.

• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.6
• /
• pp.362-368
• /
• 2005

Formation and thermal stability of a quasicrystalline phases in Al-Fe-Mo alloys were investigated by means of melt-spinning process and subsequent heat treatment test. Thermal decomposition and phase transformation process of the as-spun alloys were studied using X-ray diffraction and electron microscopy. The melt-spun Al-Fe-Mo alloys contained an icosahedral quasicrystalline phase with a quasilattice constant of 0.457 nm. Icosahedral phase formed at a composition of $Al_{82.5}Fe_{14}Mo_{3.5}$ as a metastable phase during rapid solidification was transformed into the stable crystalline phases, cubic 1/0 approximant and monoclinic ${\lambda}$-phase, upon heating. A metastable icosahedral and cubic(a = 0.93 nm) phases in as-spun $Al_{65}Fe_{20}Mo_{15}$ alloy were decomposed into two cubic(a = 0.62, 0.31 nm) phases by heat treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.530-531
• /
• 2008

본 논문에서는 우수한 광학 특성으로 활발히 연구되고 있는 광자결정(PCs)과 이를 변형시킨 광자준결정(PQCs) 구조를 설계하고 특성을 평가, 비교하였다. 특성 평가는 cubic 및 hexagonal 기본격자의 PCs와 8-fold PQC 구조를 비교하였으며 각각 동일한 충진률 동일한 굴절률 차이의 조건을 갖도록 설계하여 구조에 따른 PBGs 변화를 살펴보았다. 계산 방법은 Maxwell 방정식을 이용한 finite difference time domain (FDTD) 전산모사법을 사용하였다. 본 연구의 결과로부터 잘 설계된 2차원 PQCs는 낮은 굴절률차이(${\Delta}n$)의 물질 구조에서도 완전한 광자밴드갭(photonic bandgaps: PBGs)를 가질 수 있다는 것을 확인하였다. 본 연구진은 다중회전 홀로그래피 방법 (multi-rotational holographic method)을 이용하여 설계된 PQCs를 완벽하게 재현하려는 공정을 진행 중에 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.8-8
• /
• 2008

Two-dimensional photonic quasicrystal (PQCs) template patterns have been fabricated on a $1.1{\mu}m$-thick DMI-150 photoresist using a multiple-exposure holographic method. A 442-nm HeCd laser was utilized as a light source and the holographic exposure was carried out at a fixed angle of $\theta=6^{\circ}$. After the first holographic exposure, the sample was rotated to a proper angle and the second exposure was performed to the same manner. This exposure process was repeated n/2 times to obtain n-fold symmetric PQC patterns and then the sample was developed. The fabricated PQCs exhibited 8, 10 and 12-fold rotational symmetry and the diffraction patterns using a 632.8-nm HeNe laser were observed for n-rotation symmetry corresponding n-fold PQCs. The fabricated PQC template patterns were examined using scanning electron microscopy(SEM). Transmission spectra were measured fourier transform infrared(FTIR) spectrometer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.829-834
• /
• 2008

Two-dimensional photonic quasicrystal (PQCs) template patterns have been fabricated on a 1.1 ${\mu}m$-thick DMI-150 photoresist using a multiple-exposure holographic method. A 442-nm HeCd laser was utilized as a light source and the holographic exposure was carried out at a fixed angle of ${\theta}$ = 6$^{\circ}$. After the first holographic exposure, the sample was rotated to a proper angle and the second exposure was performed to the same manner. This exposure process was repeated n/2 times to obtain n-fold symmetric PQC patterns and then the sample was developed. The diffraction patterns of the fabricated PQC template were observed using a 632.8-nm HeNe laser. The fabricated PQCs exhibited 8, 10 and 12-fold rotational symmetry, which was in a good agreement with the interference simulation results. In addition, the diffraction patterns with n-rotation symmetry were observed for the corresponding n-fold PQCs. We believe that the multiple-exposure holography is a good method to fabricate the mesoscale PQCs with a high rotational symmetry.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.145-152
• /
• 2011

Mechanical and property corrosion resistance of Mg-Zn-Y alloys with an atomic ratio of Zn/Y of 6.8 are investigated using optical microscopy, scanning electron microscopy, transmission electron microscopy, uniaxial tensile test and corrosion test with immersion and dynamic potentiometric tests. The alloys showed an in-situ composite microstructure consisting of ${\alpha}$-Mg and icosahedral phase (I-phase) as a strengthening phase. As the volume fraction of the I-phase increases, the yield and tensile strengths of the alloys increase while maintaining large elongation (26~30%), indicating that I-phase is effective for strengthening and forms a stable interface with surrounding ${\alpha}$-Mg matrix. The presence of I-phase having higher corrosion potential than ${\alpha}$-Mg, decreased the corrosion rate of the cast alloy up to I-phase volume fraction of 3.7%. However further increase in the volume fraction of the I-phase deteriorates the corrosion resistance due to enhanced internal galvanic corrosion cell between ${\alpha}$-Mg and I-phase.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.1
• /
• pp.67-70
• /
• 2022

In the present work, we have designed to optimize the optical filter structures of the 1-dimensional photonic quasicrystals (1D PQCs) characteristic for the COVID-19 UV sterilization. The simulator using MATLAB program and ourselves manufacturing calculation codes. After making the aperiodic (and complexed) multi-layer structure model, we establish the transfer matrix method (TMM) for model by the operator conversion. By the using the MATLAB, we derive a matrix for the designed complexed multi-layer structure by applying the equations to the model by obtaining the reflectance and transmittance from the matrix. We also prove the possibility of application in optical filter for UV sterilization.