• 한국초전도ㆍ저온공학회논문지
• /
• 제21권2호
• /
• pp.1-9
• /
• 2019

Practical superconducting wires are designed with a composite structure to meet the desired engineering characteristics by expert selection of materials and design of the architecture. In practice, the local strain exerted on the superconducting component influences the electromagnetic properties. Here, recent progress in methods used to measure the local strain in practical superconducting wires and conductors using quantum beam techniques is introduced. Recent topics on the strain dependence of critical current are reviewed for three major practical wires: $Nb_3Sn$, BSCCO-2223 and REBCO tapes.

• ETRI Journal
• /
• 제20권2호
• /
• pp.231-240
• /
• 1998

We report, for the first time, the fabrication of vertically stacked InGaAs/GaAs quantum wires (QWRs) on V-grooved substrates by chemical beam epitaxy (CBE). To fabricate the vertically stacked QWRs structure, we have grown the GaAs resharpening barrier layers on V-grooves with (100)-(322) facet configuration instead of (100)-(111) base at 450 $^{\circ}C$. Under the conditions of low growth temperature, the growth rate of GaAs on the (322) sidewall is higher than that at the (100) bottom. Transmission electron microscopy verifies that the vertically stacked InGaAs QWRs were formed in sizes of about $200{\AA} {\times} 500{\sim}600 {\AA}$. Three distinct photoluminescence peaks related with side-quantum wells (QWLs), top-QWLs and QWRs were observed even at 200 K due to sufficient carrier and optical confinement. These results strongly suggest the existence of the quantized state in the vertically stacked InGaAs/GaAs QWRs grown by CBE.

• 한국진공학회지
• /
• 제12권2호
• /
• pp.118-122
• /
• 2003

저압 MOCVD 장치를 이용하여 선택적 에피 성장 (selective area epitaxy) 기술을 개발하고, 이 기술을 이용하여 InGaAs/GaAs 양자세선(quantum wire) 구조를 성장하였다. $SiO_2$로 선택적으로 마스킹 된 GaAs 기판위에 AIGaAs/GaAs 다충 구조 및 InGaAs/GaAs 양자세선 구조를 저압 MOCVD 방법으로 성장하였다. 매끄러운 사면을 갖고 끝 부분이 뽀쪽한 삼각형 구조의 양자세선 구조가 선택적 에피 성장법에 의해 자발적으로 형성되었다. 선택적 에피층 성장을 위한 최적 조건을 알기 위해 먼저 GaAs/AlGaAs 다층구조에 대하여 여러 가지 성장변수들에 대하여 조사하였다. 성장 변수들은 성장률(growth rate), V/III 비 및 성장온도, 패턴의 정렬 방향 등이다. 양자세선에서 나오는 발광은 975 nm로 분석되었다. 측정 온도가 증가됨에 따라 삼각형 구조의 사면의 양자우물에서 나오는 발광은 급격하게 감소하였다. 그러나 양자세선에서 나오는 발광은 양자우물에서 나오는 발광에 비해 서서히 감소하였고, 50 K 이상의 온도에서는 양자세선에서 나오는 발광의 세기가 더 커졌다.

• 한국진공학회지
• /
• 제12권S1호
• /
• pp.52-55
• /
• 2003

GaAs/AlGaAs quantum-wire (QWR) gain-coupled distributed-feedback (GC-DFB) lasers are fabricated and characterized Constant metalorganic chemical vapor deposition (MOCVD) growth is used to avoid grating overgrowth during the fabrication of DFB structures. Numerical calculation shows large gain anisotropy by optical feedback along the DFB directions near Bragg wavelength. DFB lasing via QWR active gratings is also experimentally achieved.

• 한국진공학회지
• /
• 제10권2호
• /
• pp.262-266
• /
• 2001

GaAS/AlGaAS 이종접합구조 위에 Split gate로 양자세선을 제작하여 Shubnikov de Haas 진동 및 양자 Hall 효과 측정으로 1DEG의 전기적 특성을 관측하였다. Gate 전압이 증가할수록 채널폭이 좁아짐에 따라 ID 특성이 나타났다. Edge state 수송 이론인 Landauer-Butikker formula로부터 QHE plateau와 SdH 진동의 최소값이 나타나는 자기장 영역이 일치하지 않고 있는 현상을 명확히 규명하였다.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.1027-1031
• /
• 2001

A new constant growth technique to conserve an initial grating height of V-groove AlGaAs/InGaAs quantum nanostructures above 1.0 $\mu\textrm{m}$ thickness has been successfully embodied on submicron gratings using low pressure metalorganic chemical vapor deposition. A GaAs buffer prior to an AlGaAs barrier layer on submicron gratings plays an important role in overcoming mass transport effects and improving the uniformity of gratings. Transmission electron microscopy (TEM) image shows that high-density V-groove InGaAs quantum wires (QWRs) are well confined at the bottom of gratings. The photoluminescence (PL) peak of the InGaAs QWRs is observed in the temperature range from 10 to 280 K with a relatively narrow full width at half maximum less than 40 meV at room temperature PL. The constant growth technique is an important step to realize complex optoelectronic devices such as one-step grown distributed feedback lasers and two-dimensional photonic crystal.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.477-477
• /
• 2011

In this paper, we synthesize ZnO wire on Si substrate by catalyst-free thermal chemical vapor deposition (CVD). Each ZnO wire is grew up at different condition such as temperature and O2 flow rate. The Young's modulus of individual ZnO wires were estimated using quasi-static and dynamic measurements, as well as resonance frequency measurements. Using this system, current-voltage characteristics of each ZnO wire structure fabricated on a trench were measured. A new concept of electromechanical device structure combined with the piezoelectric effect of ZnO will be suggested in the end of this paper.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.111.1-111
• /
• 1998

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.147.1-147
• /
• 1998

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.211-211
• /
• 2012

Using spin-polarized density-functional theory calculations, we find that the existence of either Peierls instability or antiferromagnetic spin ordering is sensitive to hydrogen passivation near the step. As hydrogens are covered on the terrace, the dangling bond electrons are localized at the step, leading to step-induced states. We investigate the competition between charge and spin orderings in dangling-bond (DB) wires of increasing lengths fabricated on an H-terminated vicinal Si(001) surface. We find antiferromagnetic (AF) ordering to be energetically much more favorable than charge ordering. The energy preference of AF ordering shrinks in an oscillatory way as the wire length increases. This oscillatory behavior can be interpreted in terms of quantum size effects as the DB electrons fill discrete quantum levels.