• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.569-571
• /
• 2003

As a definition of NERC, Available Transfer Capability(ATC) is a measure of the transfer capability remaining in the physical transmission network for the future commercial activity. To calculate ATC, accurate and defensible TTC, CBM and TRM should be calculated in advance. In this paper, we propose a method to quantify TRM using probabilistic load flow based on the method of moment. Generation output, bus voltages, loads, and line outages are considered as complex random variables (CRV) to take into account for uncertainties related to the transmission network conditions. Probability Density Function (PDF) of line flow at the most limiting line is used to quantify TRM with the desired probabilistic margin. Suggested method is compared with the results from conventional CPF method and verified using 24 bus MRTS, and the suggested method based on PLF shows efficiency and flexibility for the quantification of TRM compared with the conventional method.

• Structural Engineering and Mechanics
• /
• 제34권5호
• /
• pp.625-634
• /
• 2010

The objective of this paper is to apply a new proposed accuracy indicator to quantify the true and false modes for Eigensystem Realization Algorithm using output-based responses. First, a discrete mass-spring system and a simply supported continuous beam were modelled using finite element method. Then responses are simulated under random excitation. Natural Excitation Technique using only response measurements is applied to compute the impulse responses. Eigensystem Realization Algorithm is employed to identify the modal parameters on the simulated responses. A new accuracy indicator, Normalized Occurrence Number-NON, is developed to quantitatively partition the realized modes into true and false modes so that the false portions can be disregarded. Numerical simulation demonstrates that the new accuracy indicator can determine the true system modes accurately.

• Nuclear Engineering and Technology
• /
• 제25권3호
• /
• pp.394-402
• /
• 1993

원자력 발전소 운전원에게 발전소 상태를 정확히 알려주는 완벽한 신호가 원자력 발전소 전체의 가용도와 경제성에 얼마만한 영향을 주는가에 대한 정량적인 분석이 이 논문에서 수행되어졌다. 이 분석을 위한 기본 모델들이 개발되어졌고 이 모델들은 발전소가 정상상태에서 비정상상태로 바뀌어갈때 운전원이 발전소가 완전히 비정상상태로 가기전에 발전소를 정상상태로 회복시키는 것에 완벽한 발전소 신호가 얼마만큼 영향을 주는가를 정량화 하였다. 또한 이러한 완벽한 신호가 경제적으로 얼마만큼의 이득을 주는가도 정량화 하였다. 이 모델 적용의 대상으로는 응축 및 주급수 시스템을 선정하였다.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.115-124
• /
• 2010

According to wide-spread experience in many industries, a procedure is one of the most effective countermeasures to reduce the possibility of human related problems. Unfortunately, a systematic framework to evaluate the complexity of procedural tasks seems to be very scant. For this reason, the TACOM measure, which can quantify the complexity of procedural tasks, has been developed. In this study, the appropriateness of the TACOM measure is investigated by comparing TACOM scores regarding the procedural tasks of high speed train drivers with the associated workload scores measured by the NASA-TLX technique. As a result, it is observed that there is a meaningful correlation between the TACOM scores and the associated NASA-TLX scores. Therefore, it is expected that the TACOM measure can properly quantify the complexity of procedural tasks.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.515-525
• /
• 2000

A new acoustic field visualization technique is introduced in this study. Small particles of which density is small enough to follow up the air used for the noise field visualization. In order to quantify the noise, PIV(Particle Imaging Velocimetry) has been constructed. When the driving frequency is in the vicinity of the resonance frequency of the simplified 2-dimensional muffler system, an acoustic streaming is shown and of which velocity distribution is obtained through PIV technique. It is experimentally proved that the present technique is able to visualize and quantify the acoustic fields.

• 분석과학
• /
• 제32권4호
• /
• pp.121-130
• /
• 2019

Alumina is one of the most important ceramic materials because of its useful physical and chemical properties. Recently, high-purity alumina has been used in various industrial fields. This leads to increasing demand for reliable elemental analysis of impurities in alumina samples. However, the chemical inertness of alumina makes the sample preparation for conventional elemental analysis a tremendously difficult task. Herein, we demonstrated the feasibility of laser ablation for effective sampling of alumina powder. Laser ablation performs sampling rapidly without any chemical reagents and also allows simultaneous optical emission spectroscopy and mass spectrometry analyses. For six alumina samples including certified reference materials and commercial products, laser-induced breakdown spectroscopy (LIBS) and laser-ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) analyses were performed simultaneously based on a common laser ablation sampling. LIBS was found to be useful to quantify alkali and alkaline earth metals with limits-of-detection (LODs) around 1 ppm. LA-ICP-MS could quantify transition metals such as Ti, Cu, Zn, and Zr with LODs in the range from a few tens to hundreds ppb.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1255-1265
• /
• 2018

The need for a PSA (Probabilistic Safety Assessment) for a multi-unit at a site is growing after the Fukushima accident. Many countries have been studying issues regarding a multi-unit PSA. One of these issues is the problem of many combinations of accident sequences in a multi-unit PSA. This paper deals with the methodology and software to quantify a PSA scenarios for a multi-unit site. Two approaches are developed to quantify a multi-unit PSA. One is to use a minimal cut set approach, and the other is to use a Monte Carlo approach.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권9호
• /
• pp.4429-4445
• /
• 2019

As low-power and low-rate WSNs are being widely used for industrial applications, the scheduling of such applications becomes a critical issue to guarantee meeting the stringent requirements of determinism and tight latencies. This paper studies the link scheduling problem for real-time industrial applications in time-slotted channel hopping (TSCH) networks. We propose a heuristic algorithm for centralized link scheduling referred to as path-collision aware least laxity first (PC-LLF) algorithm, which dynamically prioritizes the packets based on the laxity time to the end-to-end deadlines and the amount of collisions that messages might deal with along their designated paths to the destination device. We propose schedulability analysis of real-time applications scheduled under our prioritization approach over TSCH networks, based on the literature on real-time schedulability analysis of multiprocessors and distributed systems. We show that our methodology provides an improved schedulability condition with respect to the existing approaches. Performance evaluation studies quantify to quantify the performance of our proposed approach under a variety of scenarios.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1616-1629
• /
• 2023

To quantify the conservatism of existing ASME strain-based evaluation methods for seismic loading, this paper presents very low cycle fatigue test data of elbows under various cyclic loading conditions and comparison of evaluation results with experimental failure cycles. For strain-based evaluation methods, the method presented in ASME BPVC CC N-900 and Sec. VIII are used. Predicted failure cycles are compared with experimental failure cycle to quantify the conservatism of evaluation methods. All methods give very conservative failure cycles. The CC N-900 method is the most conservative and prediction results are only ~0.5% of experimental data. For Sec. VIII method, the use of the option using code tensile properties gives ~3% of experimental data, and the use of the material-specific reduction of area can reduce conservatism but still gives ~15% of experimental data.

• 천문학회보
• /
• 제44권2호
• /
• pp.76.3-76.3
• /
• 2019

Intracluster stars are believed to be gravitationally bound to a galaxy cluster, however, not to individual cluster galaxies. Their presence is observed as diffuse light typically in the central region extended from the brightest cluster galaxy. The diffuse light, often referred to as intracluster light (ICL), is difficult to quantify in distant high-redshift galaxy clusters because of the significant surface brightness dimming although ICL observations in high-redshift clusters provide powerful constraints on the origin of intracluster stars. In this poster, we present ICL study of the distant galaxy cluster SPT2106-5844 at z=1.132 with Hubble Space Telescope IR imaging data. With careful control of systematics, we successfully quantify the total amount of the ICL, measure the color profile, and obtain its two-dimensional distribution. Our measurement of the high abundance of the intracluster stars in this young cluster favors the ICL formation scenario, wherein production of intracluster stars are predominantly associated with the BCG formation.