• 한국주조공학회지
• /
• 제38권5호
• /
• pp.95-102
• /
• 2018

The dependence of the tensile properties on variations in the porosity of A356 aluminium alloys was investigated in terms of the quality index of the tensile properties based upon the ultimate tensile strength and elongation as well as the variation of the strength coefficient and strain-hardening exponent with regard to a T6 treatment. The test specimens were prepared by low-pressure die-casting and a subsequent T6 treatment, and the experimental results of a tensile test carried out at room temperature were compared to the theoretical description using a modified constitutive model. The nominal value of the quality index of A356 alloys increases gradually with a lapse of the ageing time upon a T6 treatment, despite the fact that this value is temporarily decreased during the initial stage of ageing from a solutionised condition. Additionally, the quality index depends practically upon the porosity variation with a power law relationship without regard to whether in solutionised or artificial aged conditions. The theoretical description indicates that the strength coefficient directly determines the nominal level of the quality index. Moreover, the overall dependence of the quality index on the porosity variation is remarkably weakened with an increase in the tensile strain, whereas the quality index depends sensitively upon the porosity variation with a low value of the strain-hardening exponent.

• 한국환경과학회지
• /
• 제25권12호
• /
• pp.1661-1671
• /
• 2016

Water quality in Nakdong river was analyzed using 699 monitoring data sets including flow rates and water quality concentrations collected at 195 tributary monitoring stations (the priority management areas: 35 stations, the non-priority management areas: 160 stations) in 2015. The highest average concentrations of all data for BOD, COD, T-N, T-P, SS, and TOC were 30~600 times higher than the lowest concentrations while the highest average loading rates were 800,000~2,700,000 times higher than the lowest loading rates. Because of the very large differences in the concentrations and loading rates, the variation of the concentrations and loading rates in a priority management monitoring station for BOD, T-P, and TOC was analyzed using the coefficient of variation, the ratio of the standard deviation value to the mean value. For BOD, T-P, and TOC, the coefficients of variation for concentration were mostly less than 100%, whereas the coefficients of variation for loading rate ranged from 31.1% to 232.2%. The very big difference in the loading rates was due to the large variation in flow rates. As a result of this, the estimation of water quality at each monitoring station using the average values of the concentrations and loading rates might be not rational in terms of their representativeness. In this study, new water quality analysis methods using all collected monitoring data were suggested and applied according to the water quality standard in medium-sized management areas.

• 한국환경과학회지
• /
• 제17권10호
• /
• pp.1075-1080
• /
• 2008

The influence of the point source inflow on the water quality variation in the downstream of Hyeongsan River was investigated. As the results of seasonal variation, the pollutant concentrations of dry season were 1.5-4 times higher than those of wet season. The increase rate of $BOD_5$, $COD_{Mn}$, T-N, T-P due to point source were ranged to $8.1\sim42.6%$, $7.3\sim41.9%$ and $17.1\sim207%$ as the inflow of P1, P2 and P3, respectively. After P1, P2 and P3 inflow, the accumulated increase rate were 64.3%, 32.6%, 93.1% and 258.9% in $BOD_5$, $COD_{Mn}$, T-N, T-P, respectively. It was found that the influence of point source inflow on the water quality in the downstream of Hyeongsan River is severe.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.16-21
• /
• 2011

In machining operation, the quality of surface finish is an important factor for many turned products. In this paper, surface quality in turning machining considering angle variation has been investigated. To reach this goal, surface quality turning experiments are carried out according to cutting conditions with angle variation. The variable cutting conditions are cutting speed, feed rate and taper angle of workpiece. The surface roughness was measured and the effects of cutting conditions were analyzed by the method of analysis of variance (ANOVA). From the experimental results and ANOVA, it is found that a better surface roughness can be obtained as decreasing feed rate, increasing cutting speed. Taper angle variation has been more influenced by feed rate and cutting speed.

• International Journal of Quality Innovation
• /
• 제1권1호
• /
• pp.97-105
• /
• 2000

In this paper, a two-section method for measuring is introduced and the variation sources of measurement process are analysed. Measuring is a special process in general process. Various variation source must be firstly decomposed so that the statistical distribution law of measuring process can be established, and then implement monitoring control of the measuring process. A special method to obtain the measuring variation is discussed, and a monitoring control technique for measuring process is studied based statistical distribution. Towards the end, we briefly introduce software design for the analysis and control of a measurement process.

• 동아시아식생활학회지
• /
• 제25권3호
• /
• pp.484-491
• /
• 2015

This study investigated the quality variation characteristics of Ssamjang containing Cheongkukjang, in order to improve the degree of preference of Cheongkukjang. The amount of Cheongkukjang was set at 1% based on sensory evaluation. Ssamjang containing Cheongkukjang was stored at $37^{\circ}C$ for 13 weeks, after which quality variation characteristics were weekly. During storage for 13 weeks, physicochemical quality characteristics, moisture content, and pH of Ssamjang containing Cheongkukjang slightly decreased, whereas salt content did not change. Amino nitrogen content slightly increased by 1 week but decreased by 3 weeks and then increased by 5 weeks. For microbiology quality characteristics, viable cell counts and total cell counts of B. cereus were unchanged. For sensory quality characteristics, shape quality was poor after 13 weeks while mold, drying phenomenon, and swelling phenomenon were not observed. Therefore, physicochemical quality and microbiology quality of Ssamjang containing Cheongkukjang were unchanged during storage for 13 weeks, and the storage limit was determined to be 12 weeks according to sensory quality evaluation.

• 한국환경보건학회지
• /
• 제17권2호
• /
• pp.1-8
• /
• 1991

The stochastic variance and structures of time series data on air quality were examined by employing the techniques of autocorrelation function, variance spectrum, fourier series, ARIMA model. Among the air quality properties of atmosphere, SO$_{2}$ is one of the most siginificant and widely measured parameters. In the study, the air quality data were included hourly observations on SO$_{2}$ TSP and O$_{3}$. The data were measured by automatic recording instrument installed in Kwanghwamoon during February and March in 1991. The results of study were as follows 1. Hourly air quality series varied with the domiant 24 hour periodicity and the 12 hour periodic variation was also observed. 2. The correlation coefficients between SO$_{2}$ and O$_{3}$ is -0.4735. 3. In simulating or forecasting variation in SO$_{2}$ ARIMA models are on a useful tools. The multiplicative seasonal ARIMA (1, 1, 0) (0, 2, 1)$_{24}$ model provided satisfactory results for hourly SO$_{2}$ time series.

• 한국환경과학회지
• /
• 제7권5호
• /
• pp.591-598
• /
• 1998

This study was conducted to evaluate water quality in the Keum River estuary using principal component analysis. The results was summarized as follow; Water quality in the Keum River estuary could be explained up to 70.40% by three factors which were included in the inffluent loading by the Keum River and Kyungpo cheon(38.99%), seasonal variation and organic matter pollution(19.05%), sediment resuspension and internal metabolism(12.35%). For spatial variation of factor score, artificial pollutant loading is highest at st.1, below Keum River barrage, and decreases toward the outer sea. For annual variation of factor score, factor 1 was highly related to artificial pollutant leading, and it was gently increased in 1994. Also, organic matter pollution, sediment resuspension and internal metabolism were increased to every year. It is necessary to control the nutrient leading by Keum river and Kyongpo cheon for Water quality management of estuary.

• International Journal of Quality Innovation
• /
• 제4권2호
• /
• pp.16-31
• /
• 2003

A reducing variation of quality characteristics is a typical example of quality improvement. In such a case, we treat the quality characteristic, as a response variable and need to find active factors affecting the response from many candidate factors since reducing the variation of the response will be achieved by reducing variation of the active factors. In this paper, we first derive a method of selecting an active factor by linear regression. It is well known that correlation between factors deteriorates the precision of estimators. We, therefore, examine robustness of the selecting method against the correlation in the data set and derive an evaluation method of the deterioration brought by the correlation. Furthermore, some examples of selecting and evaluation methods are shown to demonstrate practical usage of the methods.

• 한국환경과학회지
• /
• 제16권3호
• /
• pp.369-376
• /
• 2007

This study was conducted to evaluate water quality in coastal sea of Kunsan using multivariate analysis. The analysis data in Coastal Sea of Kunsan use of surveyed data by the NFRDI from April 2000 to November 2002. Twelve water Quality parameter were determined on each sample. The results was summarized as follow ; Water quality in coastal sea of Kunsan could be explained up to 62.782% by four factors which were included in loading of nitrogen-nutrients by Keum river(24.688%), suspended solids variation (12.180%), seasonal climate variation (18.367%) and variation of DIP (10.546%). To analyze spatially and monthly variation by factor score, it was divided by inner area and outer area spatially, and spring and summer monthly. The result of time series analysis by factor score, inner area of Kunsan coastal sea(St.1 and St. 2) was the most affected by nitrogen-nutrient and suspended solids due to runoff by Keum river. It could be suggested from these results that it is important to reduce tile pollution loads from Kuem river for the control of the water quality in coastal sea of Kunsan.