• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1611-1623
• /
• 2021

Thisstudy demonstratessoil moisture and evapotranspiration performance using Korea Land Data Assimilation System (KLDAS) under Korea Land Information System (KLIS). Spin-up was repeated 8 times in 2018. In addition, low-resolution and high-resolution meteorological data were generated using meteorological data observed by Korea Meteorological Administration (KMA), Rural Development Administration (RDA), Korea Rural Community Corporation (KRC), Korea Hydro & Nuclear Power Co.,Ltd. (KHNP), Korea Water Resources Corporation (K-water), and Ministry of Environment (ME), and applied to KLDAS. And, to confirm the degree of accuracy improvement of Korea Low spatial resolution (hereafter, K-Low; 0.125°) and Korea High spatial resolution (hereafter, K-High; 0.01°), soil moisture and evapotranspiration to which Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2) and ASOS-Spatial (ASOS-S) used in the previous study were applied were evaluated together. As a result, optimization of the initial boundary condition requires 2 time (58 point), 3 time (6 point), and 6 time (3 point) spin-up for soil moisture. In the case of evapotranspiration, 1 time (58 point) and 2 time (58 point) spin-ups are required. In the case of soil moisture to which MERRA-2, ASOS-S, K-Low, and K-High were applied, the mean of R² were 0.615, 0.601, 0.594, and 0.664, respectively, and in the case of evapotranspiration, the mean of R² were 0.531, 0.495, 0.656, and 0.677, respectively, indicating the accuracy of K-High was rated as the highest. The accuracy of KLDAS can be improved by securing a large number of ground observation data through the results of this study and generating high-resolution grid-type meteorological data. However, if the meteorological condition at each point is not sufficiently taken into account when converting the point data into a grid, the accuracy is rather lowered. For a further study, it is expected that higher quality data can be produced by generating and applying grid-type meteorological data using the parameter setting of IDW or other interpolation techniques.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1135-1147
• /
• 2021

In order to geometrically correct high-resolution satellite imagery, the sensor modeling process that restores the geometric relationship between the satellite sensor and the ground surface at the image acquisition time is required. In general, high-resolution satellites provide RPC (Rational Polynomial Coefficient) information, but the vendor-provided RPC includes geometric distortion caused by the position and orientation of the satellite sensor. GCP (Ground Control Point) is generally used to correct the RPC errors. The representative method of acquiring GCP is field survey to obtain accurate ground coordinates. However, it is difficult to find the GCP in the satellite image due to the quality of the image, land cover change, relief displacement, etc. By using image maps acquired from various sensors as reference data, it is possible to automate the collection of GCP through the image matching algorithm. In this study, the RPC of KOMPSAT-3A satellite image was corrected through the extracted matching point using the UAV (Unmanned Aerial Vehichle) imagery. We propose a pre-porocessing method for the extraction of matching points between the UAV imagery and KOMPSAT-3A satellite image. To this end, the characteristics of matching points extracted by independently applying the SURF (Speeded-Up Robust Features) and the phase correlation, which are representative feature-based matching method and area-based matching method, respectively, were compared. The RPC adjustment parameters were calculated using the matching points extracted through each algorithm. In order to verify the performance and usability of the proposed method, it was compared with the GCP-based RPC correction result. The GCP-based method showed an improvement of correction accuracy by 2.14 pixels for the sample and 5.43 pixelsfor the line compared to the vendor-provided RPC. In the proposed method using SURF and phase correlation methods, the accuracy of sample was improved by 0.83 pixels and 1.49 pixels, and that of line wasimproved by 4.81 pixels and 5.19 pixels, respectively, compared to the vendor-provided RPC. Through the experimental results, the proposed method using the UAV imagery presented the possibility as an alternative to the GCP-based method for the RPC correction.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.3
• /
• pp.73-82
• /
• 2021

Rural roads are the significant infrastructure for developing and managing the rural areas, hence the utilization of the remote sensing datasets for managing the rural roads is necessary for expanding the rural transportation infrastructure and improving the life quality of the rural residents. In this research, the two different methods such as image classification and image segmentation were compared for mapping the rural road based on the given high-resolution satellite image acquired in the rural areas. In the image classification method, the deep learning with the multiple neural networks was employed to the given high-resolution satellite image for generating the object classification map, then the rural roads were mapped by extracting the road objects from the generated object classification map. In the image segmentation method, the multiresolution segmentation was employed to the same satellite image for generating the segment image, then the rural roads were mapped by merging the road objects located on the rural roads on the satellite image. We used the 100 checkpoints for assessing the accuracy of the two rural roads mapped by the different methods and drew the following conclusions. The image segmentation method had the better performance than the image classification method for mapping the rural roads using the give satellite image, because some of the rural roads mapped by the image classification method were not identified due to the miclassification errors occurred in the object classification map, while all of the rural roads mapped by the image segmentation method were identified. However some of the rural roads mapped by the image segmentation method also had the miclassfication errors due to some rural road segments including the non-rural road objects. In future research the object-oriented classification or the convolutional neural networks widely used for detecting the precise objects from the image sources would be used for improving the accuracy of the rural roads using the high-resolution satellite image.

• Korean Journal of Labor Studies
• /
• v.24 no.1
• /
• pp.107-156
• /
• 2018

This article examines the history of the in - house subcontracting and the stabilization of labor - management relations in the steel industry in Japan. The ratio of in-house subcontract workers among steel workers has increased steadily until the mid-2000s, and about 70% in case of the largest company. In-house subcontracting was used as a strategy of the company to increase the quantity flexibility of employment and to save labor costs. The in-house subcontracting company needed company-specialized skills, and the internal labor market was formed because the rate of full-time workers was high and the turnover rate was low. The in-house subcontractor introduced long-term business relationship with the steel factory by introducing the equipment and materials necessary for the performance of the work, and the factory implemented the productivity improvement policy of the in-house subcontractor, and the win-win relationship between the factory and in-house subcontractor was developed. The trade union did not oppose the idea that the expansion of in-house subcontracting contributed to corporate profits, the stability of employment of the members and maintenance of their working conditions. Since 2000, the steel factory has pursued the transformation of in - house subcontractors into subsidiaries, which has been supported by capital relations. By the way, since the mid-2000s, there has been an increase in the number of regular workers' employment. The major factors are as follows: more strengthened compliance with laws and regulations, the higher quality request of customers, stricter keeping of deadlines, and problem in recruiting of workers at in-house subcontract companies. The wage gap between the factory and in - house subcontracting was less at company B than at company S, and the wage level of in - house subcontracting was about 90% of the factory at company B. The relatively small gap at company B seems to be due to the union's movement of narrowing the gap, low market dominance and unfavorable labor market. The internal labor market has been formed in the in-house subcontracting, and the wage gap is not large, and the possibility of labor disputes is low. Industrial relations are stable in the in-house subcontract company as well as the factory. The stabilization of labor-management relations in the steel industry in Korea is required to reduce the wage gap between the factory and in-house subcontract enterprises by raising productivity and expanding the internal labor market at in-house subcontract enterprises.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.443-446
• /
• 2008

'Gangbaek' is a japonica rice variety developed and registered by the rice breeding team of Department of Rice and Winter Cereal Crop, NICS, RDA in 2006. 'Gangbaek' was derived from a cross between 'Suweon345' with good grain quality and 'DV85' resistant to bacterial blight, $K_{3a}$. $F_1$ plants were grown in the greenhouse in winter of 1992/1993 and backcrossed with 'Suweon345' as the recurrent parent. Plants resistant to $K_{3a}$ race of bacterial blight (BB) were selected from $BC_1F_1$ to $BC_4F_1$ and used as parents in the backcrossing processes. This variety has about 120 days growth duration from transplanting to harvesting in west-southern coast and Honam plain of Korea. It is about 69 cm in culm length and tolerance to lodging. In reaction to biotic and abiotic stresses, it shows moderately resistance to blast, and resistance to bacterial blight pathogen, $K_1$, $K_2$, $K_3$ and $K_{3a}$, but susceptible to other major diseases and insect pests. The milled rice of 'Gangbaek' exhibits translucent, relatively clear non-glutinous endosperm and midium short grain. It has lower amylose content of 18.6% and protein content of 6.4% compared with 'Nampyeongbyeo'. The milled rice yield performance of this variety is about 5.28 MT/ha in local adaptability test for three years. This cultivar would be adaptable to the bacterial blight-prone area in the south-western coastal and Honam plain of Korea.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.313-317
• /
• 2010

There are the farmer's needs to develop early-maturing cultivar adaptable to mid-northern inland plain and alpine area. Furthermore, it is required to develop a rice variety to produce new rice before concentrated marketing dates, even in the years of early Chuseok. 'Joun' is a new extremely early-maturing japonica rice cultivar developed in 2009 from the cross of SR14880-173-3-3-2-2-2/Unbong20 at Cheolwon Substation, National Institute of Crop Science (NICS), Rural Development Administration (RDA). The heading date of 'Joun' is July 23 in mid-northern alpine area, which is 7 days earlier than that of Odaebyeo. It has about 61 cm in culm length with semi-erect plant type. Panicle has a few awns and its exertion is good. The number of spikelets per panicle is smaller than that of Odaebyeo and 1,000 grain-weight of brown rice is 21.2 g which is less than 26.3 g of Odaebyeo, but the complete grain ratio is higher. Milled kernels are translucent with non-glutinous endosperm and palatability of cooked rice is good. It shows strong resistance to cold treatment, lodging, premature heading, wilting and viviparous germination during ripening stage. This cultivar shows resistance to leaf blast disease but susceptible to bacterial blight, virus disease and insect pests. The milled rice yield performance of 'Joun' is about 5.18 MT/ha by ordinary culture in local adaptability test for three years. This cultivar may be highly adaptable to the mid-northern inland plain and alpine area, north-eastern coastal area and middle plain area.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.543-548
• /
• 2011

Haiami is a new Japonica rice variety developed from a cross between 'Jinmibyeo' TR treated with ethyl methane sulfonate (EMS) EMS and 5-methytryptophan, and 'Gyehwabyeo' in order to develop a new premium quality rice variety by a rice breeding team of National Institute of Crop Science, Rural Development Administration in 2008. This variety has about 138 days of growth duration from transplanting to harvesting in central plain area of Korea. The heading date of this vareity was on $15^{th}$, August. The 'Haiami' has good semi-elect plant type and resistant to lodging with strong culm. The number of panicles/hill of 'Haiami' is more than that of 'Hwaseongbyeo'. This variety shows slow leaf senescence and considerable tolerance to viviparous germination. It is susceptible to leaf blast, bacterial blight, and insect pests, but resistance to rice stripe virus. The milled rice of this variety exhibited translucent, clear non-glutinous endosperm and short grain shape. The essential amino acid properties of 'Haiami' have more than 31% that of 'Hwaseongbyeo' in polished rice. This variety has premium palatability of cooked rice. The yield performance of this rice cultivar was about 5.38 MT/ha in milled rice in local adaptability test for three years from 2006 to 2008. 'Haiami' is adaptable to central and southern plain areas of Korea.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.512-516
• /
• 2008

A new naked oat cultivar 'Choyang' (Avena sativa L.) was developed by the breeding team at the Department of Rice and Winter Cereal Crop, NICS, RDA in 2007. It was derived from a cross between 'Sikyonggwiri' and 'Gwiri23'. The cultivar, Sikyonggwiri is early heading while the breeding line Gwiri23 has a high yielding potential with large-size grain. Bulk method combined with pedigree selection program was employed in subsequent generations, and the promising line SO96025-B-303-44-2-5 was selected for agronomic performance in 2002. The line showed both high yield and good husking rate of seed in the Yield Trial tested at Suwon in 2003 to 2004, and was subsequently designated as 'Gwiri57'. Gwiri57 was evaluated for winter hardiness, earliness, and yield in four locations, Gimje, Iksan, Jeongeup and Jinju from 2005 to 2007 and was released as Choyang. Choyang headed 11 days earlier and matured 5 days earlier than the check cultivar 'Sunyang' in the paddy field condition. The new cultivar Choyang had 97 cm of culm length and 23.4 cm of spike length, 658 spikes per $m^2$, 75 grains per spike, 28.8 g of 1,000-grain weight, and 636 g of test weight. Choyang showed better winter hardiness than that of the check cultivar Sunyang, and similar seed quality to the check cultivar in respect to crude protein (12.9%) and ${\beta}$-glucan content (4.7%). However, it showed higher husking rate than the check cultivar. The grain yield of Choyang in the regional yield trial for 3 consecutive years was averaged $4.67MT\;ha^{-1}$, which was 38% higher than that of the check cultivar Sunyang. Choyang is recommended for the fall sowing cropping only in the southern area where daily minimum mean temperatures are averaged higher than $-4^{\circ}C$ in January, and is not recommended the in mountain area where frost damage is presumable.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.6
• /
• pp.1-14
• /
• 2018

As interest and consumption of luxury goods have become more popular, luxury goods market is growing rapidly. Consumers can acquire psychological satisfaction with material abundance by purchasing and using luxury goods. Also, from the view of corporations, luxury goods have price inelastic characteristics, so they can enjoy price premium and it is good to produce good performance. That is the reason why they should pay much attention to securing luxuriousness. This study examined the establishment of brands luxuriousness in Korean SMEs. First, it examined the world market of luxury goods industry and the present condition of Korean market. Then it identified the constituents of luxuriousness by examining the prior studies and related literatures, and designed a research model based on the theoretical grounds to suggest the methods of brand luxuriousness building of Korean SMEs. Luxuriousness can be defined as the attribute of product that distinguishes luxury goods from other products by consumers' perceptions, and the factor that provides situational benefits that motivate consumers' purchasing behavior. In this study, I identified the sub-dimensions of luxuriousness according to whether there are product related attributes and consumers' benefit in consideration of the problems of existing studies. Product related luxuriousness are classified into superiority(functional benefit) and scarcity(experiential benefit), while non-product related luxuriousness are classified into differentiation(symbolic benefit) and traditionality(exclusive benefit). The following are the ways to build brand luxuriousness. First, company can use product factors. High quality, excellent design, high recognized brand with strong, favorable and unique images can enhance the luxuriousness of brand. Second, company can use price factors. Consumers tend to perceive luxury goods as high-priced items, so lowering the price of product can undermine the luxuriousness of product. Third, company can use distribution factors. It is effective for making consumers to perceive the differentiation and scarcity of luxuriousness through limited distribution channel. In addition, store atmosphere suitable for luxury brands should be created. Fourth, company can use promotion factors. The more consumers are exposed to advertisements, the more positive attitudes toward luxury brands are made, and consumers recognize luxuriousness higher. Price promotion negatively affects consumers' perception of luxuriousness. Fifth, company can use corporate factors. Consumer evaluations of products are influenced not only by the product attributes but also by the corporate association and corporate image surrounding the product. Considering the existing researches, it is possible to enhance the brand luxuriousness through high corporate competence and good corporate reputation. In order to increase the competence of the enterprise, it is useful to approach multidimensionally in relation with the knowledge creation capability. In corporate reputation, the external stakeholders' reputation is important, but the internal members' reputation is also important. Korean SMEs will be able to build brand luxuriousness by establishing marketing strategies as above and/or mix(integrate) them according to the situation.

• Journal of Energy Engineering
• /
• v.28 no.2
• /
• pp.18-35
• /
• 2019

The Korea District Heating Corporation operates a gas engine generator with a capacity of $4500m^3 /day$ of biogas generated from the sewage treatment plant of the Nanji Water Recycling Center and 1,500 kW. However, the actual operation experience of the biogas power plant is insufficient, and due to lack of accumulated technology and know-how, frequent breakdown and stoppage of the gas engine causes a lot of economic loss. Therefore, it is necessary to prepare technical fundamental measures for stable operation of the power plant In this study, a series of process problems of the gas engine plant using the biogas generated in the sewage treatment plant of the Nanji Water Recovery Center were identified and the optimization of the actual operation was made by minimizing the problems in each step. In order to purify the gas, which is the main cause of the failure stop, the conditions for establishing the quality standard of the adsorption capacity of the activated carbon were established through the analysis of the components and the adsorption test for the active carbon being used at present. In addition, the system was applied to actual operation by applying standards for replacement cycle of activated carbon to minimize impurities, strengthening measurement period of hydrogen sulfide, localization of activated carbon, and strengthening and improving the operation standards of the plant. As a result, the operating performance of gas engine # 1 was increased by 530% and the operation of the second engine was increased by 250%. In addition, improvement of vent line equipment has reduced work process and increased normal operation time and operation rate. In terms of economic efficiency, it also showed a sales increase of KRW 77,000 / year. By applying the strengthening and improvement measures of operating standards, it is possible to reduce the stoppage of the biogas plant, increase the utilization rate, It is judged to be an operational plan.