• Journal of Nutrition and Health
• /
• v.24 no.3
• /
• pp.166-178
• /
• 1991

This present study was designed to evaluate whether supplementaion of dietary coenzyme $Q_{10}$ protects the lipid peroxidation damage in adriamycin (ADR)-treated rats. Two experiments were conducted in this study. Experiment I was undertaken under the condition of simultaneous administration of ADR and coenzyme $Q_{10}$ for 4 weeks. Experiment 2 was undertaken under the same condition as experiment I after feeding the experimetal diets alone without administration of ADR for 4 weeks. Results obtained from the present study were as follows. Lipid peroxide value of plasma and heart mitochondria was elevated by ADR treatment. but decreased according to dietary coenzyme $Q_{10}$ supplementation. Pretreatment with dietary coenzyme $Q_{10}$ was more efficient in reducing ADR-induced lipid peroxide value. The simultaneous use of ADR and coenzyme $Q_{10}$ enhanced the heart glutathione peroxidase (GSH-Px) activity. particularly at higher level of coenzyme $Q_{10.}$ The change of superoxide dismutase(SOD) activity was similar to that of GSH-Px activity. In case of pretreatment with coenzyme $Q_{10, }$ these enzyme activities were more enhanced by dietary coenzyme $Q_{10.}$ However, there was little difference in catalase activity.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.5
• /
• pp.529-539
• /
• 2000

This paper proposes a prefetch-based disk buffer management algorithm, which we call W2R (Veighingjwaiting Room). Instead of using elaborate prefetching schemes to decide which blockto prefetch and when, we simply follow the LRU-OBL (One Block Lookahead) approach and prefetchthe logical next block along with the block that is being referenced. The basic difference is that theW2R algorithm logically partitions the buffer into two rooms, namely, the Weighing Room and theWaiting Room. The referenced, hence fetched block is placed in the Weighing Room, while theprefetched logical next block is placed in the Waiting Room. By so doing, we alleviate some inherentdeficiencies of blindly prefetching the logical next block of a referenced block. Specifically, a prefetchedblock that is never used may replace a possibly valuable block and a prefetched block, thoughreferenced in the future, may replace a block that is used earlier than itself. We show through tracedriven simulation that for the workloads and the environments considered the W2R algorithm improvesthe hit rate by a maximum of 23.19 percentage points compared to the 2Q algorithm and a maximumof 10,25 percentage feints compared to the LRU-OBL algorithm.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.185.1-185.1
• /
• 2007

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.409-429
• /
• 2006

In designing rock-socketed drilled shaft, bearing capacity evaluation is very important because the maximum values of base and side resistance are not generally mobilized at the same value of displacement, FHWA and AASHTO code suggest different ultimate bearing capacity formular according to rock type and shaft settlement. In domestic code suggest base resistance and side resistance can be added on condition that after confirming the result of field load test with axial load transfer test. This paper shows that static load test and hi-directional load test result analysis of deep rock-socketed drilled shaft in three different sites. Load-settlement curve, t-z, and q-w curve in rock-socketed part were calculated and compared. t-z curve in weathered and soft rock showed no deflection softening behavior in pretty large strain (about 2-3% of diameter). Ultimate resistance could be the summation of side resistance and base resistance in rock-socketed drilled shaft in domestic sites.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4
• /
• pp.3-10
• /
• 1999

Investigations of temperature differences between both cnds of thermoacoustic exchanger generated by acoustic heat transport have been carried out as a function of the position of TAC(Thermo-Acoustic Couple)[1] in a 68-cm-long duct. Fixed with the electric power at 50W, measurements were compared with the theory changing the frequency from 150Hz to 300Hz with 10Hz step. The frequency-position dependent distribution of temperature difference corresponding to the Q-values was obtained with the numerical simulation. Through this distribution, the optimum position of the thermoacoustic exchanger and the optimum driving frequency can be determined.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.4
• /
• pp.155-158
• /
• 1985

A simple active-R filter is proposed by utilizing only four resistors and two operational amplifiers. This filter has multi-functional characteristics and decreases the ratio of resistors. The sensitivity of $W_r$ and $Q_r$ as the parameter of filter is very low and the operating frequency of this active-R filter is possible in the high frequency. The integration of this active-R filter is easy due to the decrease in the number of resistors and the lowering of the ration of resistors. The experiment shows that all the characteristics of this active-R filter are in accordance with thory.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.5
• /
• pp.348-355
• /
• 2001

The coupled conduction and convection heat transfer from a protruding heated module in a horizontal channel with a variation of channel height is experimentally investigated. The input power to the module is 3, 7W and thermal resistance of module support is 0.06 , 1.03 and 158K/W. the Reynolds number ranged from 350 to 4500 corresponding to the inlet velocity(0.4~1.3 m/s) and channel height(11~35 mm). The results were obtained that the decrease of thermal resistance of module support reduces the module temperature by redistributing the heat flux and the overall thermal resistance of the module. In the study the effect of channel height is very significant in the adiabatic condition, but negligible in the conjugate condition. Finally, correlations for Nusselt number and $Q_B$/Q with a variation of Reynolds number were developed respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.319-319
• /
• 2011

KSTAR ICRF 안테나 장치에서 외곽 플라즈마 밀도분포는 고주파 출력이 내부로 전달되는 효율을 위해 중요하게 다루어 진다. 따라서 1.5T의 자기장에서 플라즈마에 간섭없이 0~$10^{14}/cm^3$의 외곽 플라즈마 밀도분포를 측정할 수 있는 Q-band 대역의 x-mode 반사계가 필요 하였다. 헬리콘 플라즈마는 $10^{13}/cm^3$ 이상의 높은 플라즈마 밀도를 수 kW 이내의 rf power와, 수 MHz 대역의 고주파원을 사용하여 높은 에너지 효율로 얻을 수 있다. 이때 높은 플라즈마 밀도는 외곽 플라즈마 밀도 와 비슷하여 제작한 반사계를 테스트 할 수 있다. 본 연구에서는 x-mode microwave 반사계를 제작하고, 1kW rf power와 10MHz 고주파원으로 헬리콘 플라즈마를 생성하여 정전 탐침으로 진단하였고, 반사계의 Q-band대역의 주파수를 가변 하여 반사되어 나오는 마이크로파의 beat 주파수를 통해 밀도 분포를 얻어서 정전탐침과 비교 분석하였다.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.365-370
• /
• 2000

We have constructed a collinear four pass Ti.sapphire laser amplifier by usmg polmization effect When we pumped the mnplifier with 188 mJ second harmonics of Q-switched Nd:YAG laser, we observed that a 450 mW 1l1cident cw Ti:sapphire laser beam is amphfled to pulse with energy of 34 mJ and pulse width (FWffM) of 25 os. We could mmllmze the a.mplified spontaneous emission by simple method of rotating the Tbapphire amplifier rod er rod

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.460-463
• /
• 1993

In this paper, The laser transmitter module is designed as the subsystem of the high repetitive laser rangefinder. The module consists of high voltage power supply, high voltage control circuits, high voltage discharger, electro-optic Q-switch driver, and laser resonator. The high voltage power supply is composed of 2-phase flyback converter. And it has 220W power level and 78% conversion efficiency. From the Q-switch driver of the crossed porro resonator, the phase retardation voltage is switched from 600V to -1500V with 200ns falling time. The module can be operated up to 15Hz. And it generates the laser pulse which has 20ns width and 80mJ.