• Korean Journal of Mathematics
• /
• v.26 no.4
• /
• pp.545-559
• /
• 2018

In this paper, we study the position vector of a developable q-slant ruled surface in the Euclidean 3-space $E^3$ in means of the Frenet frame of a q-slant ruled surface. First, we determinate the natural representations for the striction curve and ruling of a q-slant ruled surface. Then we obtain general parameterization of a developable q-slant ruled surface with respect to the conical curvature of the surface. Finally, we introduce some examples for the obtained result.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.65-68
• /
• 2001

In the vector control methods of induction motor, the stator current is divided into the flux and torque component current. By controlling these components respectively, the methods control independently flux and torque as in the DC motor and improve the control effects. To apply the vector control methods, the position of the rotor current is identified. The indirect vector control use the parameters of the machine to identify the position of rotor flux. But due to the temperature rise during machine operation, the variation of rotor resistance degrades the vector control. To solve the problem, the q-axis is aligned to reference frame without phase difference by comparing the real flux component with the reference flux component. Then to compensate the slip, PI controller is used. The proposed method keeps a constant slip by compensating the gain of direct slip frequency when the rotor resistance of induction motor varies. To prove the validations of the proposed algorithm in the paper, computer simulations is executed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.4
• /
• pp.161-166
• /
• 2003

This paper proposes a sensorless vector control of interior permanent magnet synchronous motor(IPMSM) using a reduced order observer. This method introduce the auxiliary control inputs that can eliminate the nonlinear term in the electrical equations and realize the linearization of the motor model. The rotor speed estimate with the observer that needs only the q-axis current. The rotor position calculate using the estimated rotor speed. The speed and position control implement with the estimated value. The validity of the proposed scheme is confirmed by various response characteristics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1487-1490
• /
• 2003

In this paper, the application of object-oriented Data Model to develop a multibody dynamic system, called O-DYN, is introduced. Mechanical components, such as bodies, joints, forces are modeled as objects which have data and method by using object-oriented modeling methodology. O-DYN, a dynamic analysis system, based on the object-oriented modeling concept is made in C++. One example is analyzed through the O-DYN, It is expected that the analysis program or individual module constructed in this paper would be useful for mechanical engineers in predicting the dynamic responses of multibody systems and developing an analysis program

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.65-68
• /
• 2001

In the vector control methods of induction motor, the stator current is divided into the flux and torque component current. By controlling these components respectively, the methods control independently flux and torque as in the DC motor and improve the control effects. To apply the vector control methods, the position of the rotor current is identified. The indirect vector control use the parameters of the machine to identify the position of rotor flux. But due to the temperature rise during machine operation, the variation of rotor resistance degrades the vector control. To solve the problem, the q-axis is aligned to reference frame without phase difference by comparing the real flux component with the reference flux component. Then to compensate the slip, PI controller is used. The proposed method keeps a constant slip by compensating the gain of direct slip frequency when the rotor resistance of induction motor varies. To prove the validations of the proposed algorithm in the paper, computer simulations is executed.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.2
• /
• pp.98-106
• /
• 2006

This paper proposes to position and speed control of interior Permanent magnet synchronous motor(IPMSM) drive without mechanical sensor. Also, this paper develops a adaptive fuzzy controller based fuzzy logic control for high performance of PMSM drives. In the proposed system, fuzzy control is used to implement the direct controller as well as the adaptation mechanism. A Gopinath observer is used for the mechanical state estimation of the motor. The observer was developed based on nonlinear model of IPMSM, that employs a d-q rotating reference frame attached to the rotor. A Gopinath observer is implemented to compute the speed and position feedback signal. The validity of the proposed scheme is confirmed by various response characteristics.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1773-1780
• /
• 2016

This paper proposes a wide air-gap control method for the multi-module permanent magnet linear synchronous motor (MM-PMLSM) based on independent vector control. In particular, the MM-PMLSM consists of symmetrical multi-module and multi-phase structures, which are basically three-phase configurations without a neutral point, unlike conventional three-phase machines. In addition, there are no additional magnetic levitation windings to control the normal force of the air-gap between each stator and mover. Hence, in this paper, a dq-axis current control applying a d-q transformation and an independent vector control are proposed for the air-gap control between the two symmetric stators and mover of the MM-PMLSM. The characteristics and control performance of the MM-PMLSM are analyzed under the concept of vector control. As a result, the proposed method is easily implemented without additional windings to control the air-gap and the mover position. The effectiveness of the proposed independent vector control algorithm is verified through experimental results.

• Journal of Power Electronics
• /
• v.3 no.1
• /
• pp.49-54
• /
• 2003

A novel control scheme of using a single electronic drive to synchronize two synchronous motors is investigated analytically. The developed control strategy extends the conventional vector control technology, Specifically, it utilizes the property that the motion of two motors can be independently controlled by the q-axis currents provided the desired q-axis currents can be achieved by adjusting physical armature currents. The latter part is indeed guaranteed by adding a position offset to one of the motors. This work has a potential of cost saving in practice where the cost of drive is a major concern.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.1
• /
• pp.1-7
• /
• 2005

This paper is proposed the speed and position sensorless control of surface permanent magnet synchronous motor(SPMSM) with adaptive fuzzy and observer. A adaptive fuzzy controller is applied for speed control of SPMSM drive. A adaptive state observer is used for the mechanical state estimation of the motor. The observer was developed based on nonlinear model of SPMSM, that employs a d - q rotating reference frame attached to the rotor. A adaptive observer is implemented to compute the speed and position feedback signal. The validity of the proposed sensorless scheme is confirmed by various response characteristics.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.9
• /
• pp.600-608
• /
• 1988

Although the structure of brushless dc motor is similar to that of a Permanent magnet synchronous motor, its torque-speed characteristcis are the same as those of a permanent magmet dc motor. The brushless dc motor drive systemcomposed of power converter including inverter, rotor positioning sensor and controller has been investigated for the purpose of position control when the motor is fed by a current controlled voltage source inverter. The equivalent transformation of a brushless dc motor into an separately exited dc motor has been possible with the vector control (field oriented control) technique. It is shown in this paper that the position control of a brushless dc mitor can be done fairly accurately only using q-axis current.