• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.231-236
• /
• 2007

Electrical resistivity, self-potential and time-domain induced polarization methods were conducted for study of electrical responses on vein-type sulfides ore, which is intruding limestone and dolomite of Ordovician, of Geumpung mine located in Dojeon-ri, Susan-myeon, Jecheon-si, Chungbuk. Sulfides bearing chalcopyrite, pyrrhotite and galena etc. are deposited in disseminated or vein-type. Good result that resistivity and self-potential surveys detect high grade-estimated mineralized zone located in upper part of existing low grade ore zone is acquisited and is to some extent consistent with induced polarization. Furthmore, a new mineralization zone directing EW is detected.

• Economic and Environmental Geology
• /
• v.10 no.3
• /
• pp.99-105
• /
• 1977

Mineralogical study of original and crushed zinc ores as well as mill products was made in order to find out the cause of low-grade concentrate and the scheme of raising its grade. Low-grade concentrate is due to 1) the abundance of other independent sulfides (arsenopyrite, pyrrhotite, chalcopyrite, stannite) and silicate (quartz) in the zinc concentrate, 2) the presence of composite grains of sphalerite and other sulfides or silicate, 3) the presence of a lot of very fine-grained particle of stannite and chalcopyrite within the sphalerite grains, and 4) the high content of iron in sphalerite. It is proposed that further crushing and other appropriate processing should be made in order to increase the grade of zinc concentrate.

• Economic and Environmental Geology
• /
• v.24 no.2
• /
• pp.131-150
• /
• 1991

The Weolseong diatreme was temporally and spatially related to the intrusion of the Gadaeri granite, and was -mineralized by meteoric aqueous fluids. In the Nokdong As-Zn deposit, pyrite, aresenopyrite and sphalerite are the most abundant sulfide minerals. They are associated with minor amount of magnetite, pyrrhotite, chalcopyrite and cassiterite, and trace amounts of Pb-Sb-Bi-Ag sulphosalts. The AsZn ore probably occurred at about $350^{\circ}C$ according to fluid inclusion and compositional data estimated from the arsenic content of arsenopyrite and iron content of sphalerite intergrown with pyrrhotite + chalcopyrite + cubanite. Heating studies of fluid inclusions in quartz indicate a temperature range between 180 and $360^{\circ}C$, and freezing data indicate a salinity range from 0.8 to 4.1 eq.wt % NaCl. The coexisting assemblage pyrite + pyrrhotite + arsenopyrite suggests that $H_2S$ was the dominate reduced sulfur species, and defines fluid parameter thus: $10^{-34.5}$ < ${\alpha}_{S_2}$ < $10^{-33}$, $10^{-11}$ < $f_{S_2}$ < $10^{-8}$, -2.4 < ${\alpha}_{S_2}$ < -1.6 atm and pH= 5.2 (sericte stable) at $300^{\circ}C$. The sulfur isotope values ranged from 1.8 to 5.5% and indicate that the sulfur in the sulfides is of magmatic in origin. The carbon isotope values range from -7.8 to -11.6%, and the oxygen isotope values from the carbonates in mineralized wall rock range from 2 to 11.4%. The oxygen isotope compositions of water coexisting with calcite require an input of meteoric water. The geochemical data indicate that the ore-forming fluid probably was generated by a variety of mechanisms, including deep circulation of meteoric water driven by magmatic heat, with possible input of magniatic water and ore component.

• Economic and Environmental Geology
• /
• v.50 no.1
• /
• pp.35-44
• /
• 2017

The Hadong-Sancheong Proterozoic anorthosite complex occurs in the southwestern region of the Ryongnam massif. The geology of the area mainly consists of metamorphic rocks of the Jirisan metamorphic complex as basement rocks, charnockite, and the Hadong-Sancheong anorthosite, which are intruded by the Mesozoic igneous rocks. Hadong-Sancheong anorthosite complex is divided into the Sancheong anorthosite and the Hadong anorthosite which occur at north-southern and south area of the Jurassic syenite, respectively. The Hadong Fe-Ti-bearing dike-like ore bodies developed intermittently in the Hadong anorthosite with north-south direction and extend about 14 km. The Hadong Fe-Ti-bearing ore bodies consist mainly of magnetite and ilmenite with rutile, titanite, and minor amounts of sulfides(pyrrhotite, pyrite, chalcopyrite and sphalerite). The Hadong Fe-Ti-bearing ore bodies show a paragenetic sequence of magnetite-ilmenite ${\rightarrow}$ magnetite-ilmenite-pyrrhotite ${\rightarrow}$ ilmenite-pyrrhotite-rutile-titanite(and/or pyrite) ${\rightarrow}$ sulfides. Equilibrium thermodynamic interpretation of the mineral paragenesis and assemblages indicate that early Fe-Ti-bearing ore mineralization in the ore bodies occurs at about $700^{\circ}C$ which corresponds to oxygen fugacity of about $10^{-11.8}{\sim}10^{-17.2}$ atm with the decrease tendency of sulfur fugacity to about $10^0$ atm as equilibrium of $Fe_3O_4-FeS$. The change of ore mineral assemblages from Fe-Ti-bearing minerals to sulfides in late ore mineralization of the ore bodies indicates that oxygen fugacity would have slightly decreased to ${\geq}10^{-20.2}$ atm and increased sulfur fugacity to ${\geq}10^0$ atm.

• Economic and Environmental Geology
• /
• v.19 no.spc
• /
• pp.193-206
• /
• 1986

A number of auriferous veins occur in the Precambrian metamorphic terrain from Chungju to Mugeug district. These gold (-silver) deposits consist mainly of the fissure-filling quartz veins intruding the Precambrian gneiss or schist and Jurassic or Cretaceous granite. These gold (-silver) deposits can be 'divided into two mineralization epochs, (a) gold-rich veins related to Daebo igneous activity, and (b) gold-silver veins related to Bulgugsa igneous activity. These two groups of ore deposits with different generation can be characterized by the mode of occurrence of ore vein and the ore mineral associations. The auriferous quartz veins of Taechang and Boryeon mines associated with late Jurassic igneous activity are massive in character, and show the simple mineral assemblages and low Ag/Au ratio in the ores, representing a single mineralization system. The ore minerals are predominantly quartz containing minor or trace amonts of pyrrhotite, sphalerite, galena, pyrite, chalcopyrite and electrum. Electrum is closely associated with pyrrhotite and has chemical compositions from 61.4 to 78.5 atomic % Au. Fluid inclusion data suggest that ore minerals were deposited at temperatures between 238 and $390^{\circ}C$ from $CO_2$-rich fluids. The gold and/or silver-bearing quartz veins of Geumwang mine related to middle Cretaceous igneous activity are characterized by the multistage history, diverse mineral assemblages with high Ag/Au ratio in the ores. The ores of Geumwang mine have two contrasting mineral assemblages (1) pyrite+galena+sphalerite+arsenopyrite+electrum+argentite, representing the higher gold mineralization, and (2) pyrite+chalcopyrite+ galena +sphalerite+ arsenopyrite+silver sulfosalts+ electrum+ native silver+argentite, representing the higher silver mineralization. Electrum is closely associated with pyrite and has chemical compositions from 11.2 to 49.9 atomic % Au. The depositional environment during the higher gold mineralization can be estimated as the range of both temperature and sulfur fugacity, T= $200{\sim}300^{\circ}C$, log f ($S_2$) = $10^{-10}{\sim}10^{-15}$. The higher silver mineralization may be interpreted to have formed a range of falling temperature ($150{\sim}200^{\circ}C$) and low sulfur fugacity($10^{-10}{\sim}10^{-15}$). These temperature data are consistent with homogenization temperatures of fluId inclusions in quartz. Thus, the gold veins related to the Daebo igneous activity may be formed by the environment of higher temperature and pressure than the gold-silver veins associated with the Bulgugsa igneous activity.

• Economic and Environmental Geology
• /
• v.19 no.spc
• /
• pp.207-226
• /
• 1986

The skarn type tungsten deposits in Jechon area are developed in the contact aureole of Jurassic granodiorite and lower Paleozoic limestone beds. The Tong Myeong mine contains scheelitebearing skarns found at and near the contacts between crystalline limestone and hornfels. Although the skarns are heterogeneous, there are clear patterns in the preferred associations and nonassociations of minerals on all scales. The skarn show a zonal arrangement from limestone to hydrothermal vein as follow: wollastonite skarn, clinopyroxene skarn, clinopyroxene-garnet skarn, garnet skarn, and vesuvianite skarn. Scheelite, abundant in all skarn units except wollastonite skarn and also in quartz veins near orebodies, is everywhere strongly correlated with pyrrhotite. It is implied that it was a stable phase throughout the evolution of the zoned skarns, at least in pyrrhotite.forming environments. Deposition of scheelite was probably widely caused by increasing $a_{Ca^{2+}}$ in the fluid, resulting from associated and interrelated reactions: $FeCl_2\;aq+H_2S\;aq{\rightarrow}FeS+2H^{+}+2Cl^-$; and $CaCO_3+2H^+{\rightarrow}Ca^{+2}+H_2CO_3$. The spectral reflection powers of nine sulfide species were studied, for three mineralization stage. The shapes and characteristics of the spectral reflectivity profiles are significant in their control of other optical properties. The characteristics of the Vickers microhardness and the optical symmetry for the minerals studied are discussed. Broad radicle groupings of the sulfides can be made with regard to the reflectivity-microhardness values.

• Economic and Environmental Geology
• /
• v.26 no.3
• /
• pp.311-325
• /
• 1993

The Ohto and Tohyun copper mine which are located 4 km southeast of Euiseong, Gyeongsangbukdo, Republic of Korea show various common geologic and mineralogic features. Both copper deposits are of hydrothermal-vein types, and associated with fracture system developed during formation of the Geumseong-san caldera in late Cretaceous age. According to structures and mineral assemblages, the mineralization processes have progressed in four stages: three hypogene mineralization stages and one supergene stage. Three hypogene stages are 1) stage I forming $N5{\sim}20^{\circ}E$ veins in the Ohto mine, 2) stage II building $N5^{\circ}W{\sim}N5^{\circ}E$ veins in the Tohyun mine, and 3) stage ill bringing $N80^{\circ}E$ veins which crosscut veins of the stage II. The vein ores consist mainly of pyrite, arsenopyrite, galena and chalcopyrite, minor or trace amounts of magnetite, hematite, pyrrhotite, stannite, bournonite, boulangerite, stibnite, galenobismutite, native bismuth, marcasite, geothite and malachite. The main gangue minerals are quartz and calcite. Wallrock is altered by sericitization, chloritization, pyritization, carbonitization and argillization. Arsenic and copper contents in arsenopyrite increase from stage I to stage III (from 31.28 to 33043 atom.% As) and (from 0.04 to 0040 atom.% Co). Going from stage I to stage III Fe and Mn contents in sphalerite decreases from 12.56 to 0.44 wt.% and from 0.24 to 0.01 wt.%, respectively. The compositional data of arsenopyrite in the early stage I indicate a temperature of $420{\sim}365^{\circ}C$ and sulfur fugacity of $10^{-6.5}{\sim}10^{-8.3}$ atm. Chalcopyrite and pyrrhotite assemblage suggest that Middle stage I was deposited at below $334^{\circ}C$. The compositional data of arsenopyrite in early stage II suggest a temperature range of $425{\sim}390^{\circ}C$ and sulfur fugacity codition of $10^{-6.4}{\sim}10^{-7.3}$ atm. Based on fluid inclusion the Middle stage II was regarded as to be deposited at $420{\sim}337^{\circ}C$ (Chi et al., 1989). Referring composition of sphalerite and stannite middle-late stage II seem to be deposited around $246^{\circ}C$ and $10^{-16.5}$ atm. sulfur fugacity. The ${\delta}^{34}S$ values of sulfide minerals in the Stage I, II, III range from 4.9 to 7.6%0 and indicate igneous ore fluid origin. Based on differences in mineral assemblages, chemical composition and chemical environments of Ohto and Tohyun mine its mineralization are considered to be formed at diffent mineralization ages and by different ore fluids.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.1
• /
• pp.1-17
• /
• 2003

The chemical composition of the arsenopyrite Ib adjoining“triple mutual contact”arsenopyrite + pyrite + hexagonal pyrrhotite may serve as a useful geothermometer in Stage II. In this study it corresponds to temperature T=33$0^{\circ}C$ and f( $S_2$)=10$^{-9.5}$ atm. And the pyrite-hexagonal pyrrhotite buffer curve indicates the probable range of the two variables; T= 315∼345$^{\circ}C$, and f( $S_2$)=10$^{-1}$0.5/∼10$^{-9}$ atm. The present antimony-bearing arsenopyrite (arsenopyrite Ic) is characterized by relatively high content of antimony, ranging from 4.95 to 8.91 percent Sb by weight and excess of iron and deficiency of anions are evident. Such a high antimonian arsenopyrite has never been known within single grain. But being the high content of antimony as in the arsenopyrite Ic, it does not serve as a geothermometer. The results of microprobe analyses for four pairs of asenopyrite and sphalerite in Stage III indicate the temperature range from 310 to 34$0^{\circ}C$, and sulphur fugacity range from 10$^{-10}$ ∼10$^{-9}$ atm. These values seem to correspond with those inferred from the Fe-As-S system.m..

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.3
• /
• pp.141-153
• /
• 2016

The Manjang deposit is emplaced in Hwajeonri formation comprising limestone that is interbeded with slate and phyllite in the central Okcheon Group. It consists of the Main and the Central orebody of Cu-bearing hydrothermal vein deposit and the Western orebody of iron skarn deposit. Based on coexisting mineral assemblage the skarnization can be divided into prograde skarnization (stage I : clinopyroxene ${\pm}$ magnetite ${\pm}$ quartz, stage II : garnet + clinopyroxene ${\pm}$ magnetite ${\pm}$ quartz) and retrograde hydrothermal alteration (stage III: magnetite + amphibole + quartz ${\pm}$ garnet ${\pm}$ clinopyroxene ${\pm}$ chlorite ${\pm}$ epidote ${\pm}$ fluorite ${\pm}$ calcite, stage IV: fluorite ${\pm}$ pyrrhotite ${\pm}$ chalcopyrite ${\pm}$ amphibole ${\pm}$ quartz ${\pm}$ calcite). Diopside is abundant in stage I, and hedenbergite was produced in stage II and III. Garnet compositions change from grandite to andradite, which suggests a redox transition from relatively reduced to oxidized condition during the skarn formation. Magnetite in stage I and II has relatively constant Fe contents, while in the stage III it has increased Si and Ca concentrations. This variation could indicate that magnetite was more strongly affected by host rocks during the retrograde stage. Sulfur isotope compositions of pyrrhotite and chalcopyrite produced in stage IV are within the range of + 5.9~6.9 ‰, corresponding to igneous origin, but slightly high sulfur isotope values could be attributed to an interaction with host rocks, limestone.

• Economic and Environmental Geology
• /
• v.53 no.3
• /
• pp.297-306
• /
• 2020

The red mud generated from bauxite during the Bayer alumina production process has been regarded as an industrial waste due to the high alkaline property and high content of Na. Despite of its environmental problem, various studies for recovery of the valuable resources from red mud has been also carried out because of high content (25.7 wt.% as Fe₂O₃ in this study) of iron in red mud. In order to recover the iron resource in the red mud, microwave heating experiments were performed with adding of activated carbon and elemental sulfur to the red mud. Through the microwave heating the powdered red mud mixtures converted to porous and vitrified solid aggregates. The vitrified aggregates produced by microwave heating are composed of goethite, zero valent iron (Fe⁰), pyrrhotite and pyrite. And then, the microwave heating samples were dissolved in the aqua regia solution, and Fe precipitates were obtained as a Fe-chlorides by adding of NaCl salt in the aqua regia solution. The Fe recovery rates in the Fe-chloride precipitates showed differences depending on the experimental mixture conditions, and Fe grades of the end products are 49.0 wt.%, 58.0 wt.% and 59.5 wt.% under mixture conditions of red mud, red mud + activated carbon, and red mud + activated carbon + elemental S, respectively. The Fe content of 56.0 wt.% is generally known as the grade value of Fe in a iron ore for iron production, and the Fe grades of microwave heating samples with adding activated carbon and elemental S in this study are higher than the grade value of 56.0 wt.%.