• Journal of the Korean Data and Information Science Society
• /
• 제25권4호
• /
• pp.847-855
• /
• 2014

최근 몇 년간 여자프로골프는 상금액과 경기력에서 타 종목보다 크게 성장을 하고 있다. 그 이유로는 아시아지역에서의 스포츠마케팅의 활성화와 국제무대에서 대한민국 여자골프 선수들이 좋은 성적을 거두며 남자골프나 다른 여성스포츠 종목보다 인기가 상승하였기 때문이다. 또한, 상금액수가 타 종목과 비교해서 월등히 많고 골프와 연관된 금융상품이나 기타 의류 및 골프용품 산업의 발전 등으로 선수들의 경제적 혜택이 좋아졌다고 할 수 있다. 이러한 좋은 환경 덕분에 여성 스포츠 유망주들이 계속 유입되고 있고, 과학을 이용한 골프 장비의 발달로 선수들의 경기력이 날로 향상되고 있다. 본 연구에서는 2009년부터 최근 5년간 활동한 선수들의 반복 측정된 자료를 토대로 시간에 따른 경기력 변화를 성장곡선을 활용하여 분석하였다. 성장곡선은 여러 가지 분석방법으로 접근할 수 있으나, 본 연구에서는 반응변수들의 정규분포를 가정하고 고정, 임의효과를 고려할 수 있는 혼합모형을 적용하였다. 분석결과 골프 경기기술 중 드라이브 비거리와 평균 퍼팅은 시간에 따라 발전적이었으나 그린 적중률은 감소하였다.

• 한국인터넷방송통신학회논문지
• /
• 제18권1호
• /
• pp.15-21
• /
• 2018

데이터센터 네트워크의 자원을 효율적으로 활용하여 플로우들의 지연시간을 줄이기 위해서는 플로우 단위의 스케줄링보다는 패킷단위의 스케줄링이 적합하다. 따라서 최근에는 데이터센터 네트워크의 다중경로를 활용하여 패킷단위로 스케줄링을 수행하는 방식이 많이 제안되었다. 그러나 이로 인해 발생하는 순서 바뀐 패킷들이 표준 TCP 성능에 미치는 부정적인 영향을 줄이기 위해, 대부분의 방식들은 TCP 아래 계층에서 순서를 다시 맞추는 등의 보완방안을 필요로 한다. 본 논문에서는 데이터센터 네트워크의 대표적인 전송계층 프로토콜인 DCTCP가 다중경로상의 패킷단위 분산과 함께 사용될 때 어떤 성능을 보이는지 모의실험을 통해 조사한다. 모의실험 결과는 DCTCP가 큐의 길이를 짧게 유지할 수 있지만 혼잡신호에 따라 혼잡윈도우를 줄이는 방식 때문에 오히려 공평성 등의 측면에서는 기존 TCP보다도 낮은 성능을 가짐을 보여준다.

• 터널과지하공간
• /
• 제24권4호
• /
• pp.316-324
• /
• 2014

고준위 방사성 폐기물 처분시스템은 지하 500 m 심도에서 암반에 터널을 뚫어 고준위폐기물 처분용기를 넣고 주위를 완충재로 매우는 형태이다. 많은 통계 자료에 의하면 한반도에서 매년 지진이 증가하는 추세이며, 지진이 발생할 경우 지하에서 발생된 전단력에 의해 처분용기가 손상될 수 있다. 더 나아가 방사성 유해물질이 유출되어 큰 환경 문제가 유발될 수 있다. 이에 본 논문에서는 지진에 대해 안전하게 보호할 수 있는 방법으로 내진형 완충재를 개발하였다. 내진 성능에 영향을 미치는 주요인자를 분석하여 내진형 완충재를 설계하였고, ABAQUS를 이용하여 전단해석모델을 개발하여 내진형 완충재의 성능을 평가하였다.

• 한국분무공학회지
• /
• 제28권1호
• /
• pp.1-9
• /
• 2023

In the cylinder of gasoline direct injection engines, the spray targeting from injectors is of great significance for fuel consumption and pollutant emissions. The automotive industry is putting a lot of effort into improving injector targeting accuracy. To improve the targeting accuracy of injectors, it is necessary to develop models that can predict the spray targeting positions. When developing spray targeting models, the most used technique is computational fluid dynamics (CFD). Recently, due to the superiority of machine learning in prediction accuracy, the application of machine learning in this field is also receiving constant attention. The purpose of this study is to build a machine learning model that can accurately predict spray targeting based on the design parameters of injectors. To achieve this goal, this study firstly used laser sheet beam visualization equipment to obtain many spray cross-sectional images of injectors with different parameters at different injection pressures and measurement planes. The spray images were processed by MATLAB code to get the targeting coordinates of sprays. A total of four models were used for the prediction of spray targeting coordinates, namely ANN, LSTM, Conv1D and Conv1D & LSTM. Features fed into the machine learning model include injector design parameters, injection conditions, and measurement planes. Labels to be output from the model are spray targeting coordinates. In addition, the spray data of 7 injectors were used for model training, and the spray data of the remaining one injector were used for model performance verification. Finally, the prediction performance of the model was evaluated by R² and RMSE. It is found that the Conv1D&LSTM model has the highest accuracy in predicting the spray targeting coordinates, which can reach 98%. In addition, the prediction bias of the model becomes larger as the distance from the injector tip increases.

• 대한지역사회영양학회지
• /
• 제10권6호
• /
• pp.905-919
• /
• 2005

This study raised the necessity of developing performance indicators for measuring the management efficiency and effectiveness of school food service, and as a means of helping its implementation, a balanced score card (BSC) approach developed by Norton and Kaplan was adopted. This study established BSC in seven phases through literature: Phase 1 Defining a school food service and the scope of working activities, Phase 2 Establishing the vision of a school food service, Phase 3 Setting strategic goals, Phase 4 Identifying critical success factors (CSFs), Phase 5 Developing Key Performance Indicators (KPIs), Phase 6 Extracting cause and effect relationship, and Phase 7 Completing a preliminary BSC. The preliminary BSC was fumed into a survey, which was administered to food service related people working at the Office of Education and School Food Service including 16 offices,209 dietitians, 48 school administrators both from self-operated and contract-managed, and 9 experts in areas related to school food service. They were asked questions about strategies from 4 different perspectives,12 CSFs, 39 KPls, and the cause and effect relationships among them. As a result, among the CSFs based on 4 different perspectives, all factors other than ' zero sum on profit/loss ' from the financial perspective turned out to be valid. In terms of KPIs, manufacturing cost percentages, casualty loss count/reduction rates, school foodervice participation rates, and sales goal achievement rates were found to be valid from the financial perspective, while student satisfaction index, faculty satisfaction index, leftover ratio, nutrition educational performance count, index of evaluating nutrition education, customer claim count/reduction rate, handling customer claim count/reduction rate, and parent satisfaction index were found to be valid from the customers' perspective. Besides, nutritional requirement sufficient ratio, nutritional management score, food poisoning outbreak count, employee safety accident count, sanitary inspection assessment index, meals per labor hour (productivity index), computerization ratio, operational management index, and purchase management assessment index were also found to be valid from the perspective of internal business processes. From the perspective of innovation and learning, employee turnover ratio/rate of absenteeism, annual education and training count, employee satisfaction index, human resource management assessment index, annual menu-related customer feedback, food service information index for employees and parents/schools were also found to be valid. The significance of this study is to present indices for measuring overall performance of school lunch food service operations without putting any limitation on types of school food service management, and to help correctly assess the contribution of the current types of school food service management to schools and students. (Korean J Community Nutrition 10(6) : $905\∼919$, 2005)

• 한국강구조학회 논문집
• /
• 제19권6호
• /
• pp.559-573
• /
• 2007

강바닥판 교량은 비교적 얇은 강판을 서로 용접에 의해 연결한 구조물로서 많은 양의 용접을 피할 수 없다. 강바닥판의 횡리브 복부판에서는 전단력과 비틀림 모멘트가 작용하는 동시에 종리브의 비틀림으로 인한 면내 면외 변형이 작용하기 때문에 종리브-횡리브 복부판-데크플레이트 교차부 및 횡리브복부판 컷아웃(슬릿)부에서 응력집중 현상이 두드러지게 발생하게 된다. 본 연구에서는 강바닥판 구조형식의 피로성능 향상 효과가 큰 교차부에 스캘럽을 두지 않는 동시에 종리브 내부에 횡리브 복부판면과 일치되게 다이아프램을 설치하면 컷아웃부 및 교차부에서의 응력집중 감소효과가 크며, 특히 다이아프램의 설치가 컷아웃부에서의 응력집중 감소효과에 큰 영향을 미치고 있는 연구결과를 바탕으로 다이아프램 상하부면 곡률반경을 대상으로 매개변수해석을 수행한 결과 피로성능에 영향이 큰 응력집중 감소효과가 큰 최적 다이아프램형상을 도출하였다. 또한 최적 다이아프램 형상을 바탕으로 피로성능 향상에 유리한 다이아프램 최적 설치위치를 도출하였다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1061-1061
• /
• 2001

The scope of precision agriculture is to reach the put up cultivation goals by adjusting inputs as precise as possible after what is required by the soil and crop potentials, on a high spatial resolution. Consequently, precision agriculture is also often called site specific agriculture. Regulation of field inputs “on the run” has been made possible by the GPS (Geographical Position System)-technology, which gives the farmer his exact real time positioning in the field. The general goal with precision agriculture is to apply inputs where they best fill their purpose. Thus, resources could be saved, and nutrient losses as well as the impact on the environment could be minimized without lowering total yields or putting product quality at risk. As already indicated the technology exists to regulate the input based on beforehand decisions. However, the real challenge is to provide a reliable basis for decision-making. To support high spatial resolution, extensive sampling and analysis is required for many soil and plant characteristics. The potential of the NIR-technology to provide rapid, low cost analyses with a minimum of sample preparation for a multitude of characteristics therefore constitutes a far to irresistible opportunity to be un-scrutinized. In our work we have concentrated on soil-analysis. The instrument we have used is a Bran Lubbe InfraAlyzer 500 (1300-2500 nm). Clay- and organic matter-contents are soil constituents with major implications for most properties and processes in the soil system. For these constituents we had a 3000-sample material provided. High performance models for the agricultural areas in Sweden have been constructed for clay-content, but a rather large reference material is required, probably due to the large variability of Swedish soils. By subdividing Sweden into six areas the total performance was improved. Unfortunately organic matter was not as easy to get at. Reliable models for larger areas could not be constructed. However, through keeping the mineral fraction of the soil at minimal variation good performance could be achieved locally. The influence of a highly variable mineral fraction is probably one of the reasons for the contradictory results found in the literature regarding organic matter content. Tentative studies have also been performed to elucidate the potential performance in contexts with direct operational implications: lime requirement and prediction of plant uptake of soil nitrogen. In both cases there is no definite reference method, but there are numerous indirect, or indicator, methods suggested. In our study, field experiments where used as references and NIR was compared with methods normally used in Sweden. The NIR-models performed equally or slightly better as the standard methods in both situations. However, whether this is good enough is open for evaluation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권8호
• /
• pp.1158-1161
• /
• 2004

This study chiefly aims to ascertain the effect of birth weight and litter size on productive performance in rabbits. After delivery kits were removed from their mothers for individual weighing and randomly assigned to one of the following three experimental treatments: Group (KT 6) with six tiny kits (about 45 g) per litter (21 litters); Group (KT 8) with eight tiny kits (about 45 g) per litter (17 litters); Group (KN8) with eight normal kits (about 70 g) per litter (20 litters). The litters, separated from their mothers by putting them in a closed cage, suckled one time a day for 15 minutes. Daily milk production was measured by weighing the does immediately before and after suckling; body weight of kits was measured on a weekly basis. At weaning 60 rabbits per group were raised for six weeks to ascertain post-weaning performance and health. Compared with the two other groups, the kits of group KT8 ingested smaller quantities of milk both during the first 3 weeks (497.7 vs. 520.0 vs. 544.3 g, respectively for groups KT8, KN8, KT6) and the following period (261.3 vs. 285.0 vs. 302.7 g, respectively for KT8, KN8, KT6). The differences between groups KT8 and KT6 were statistically significant (p<0.01) in the first period while in the second period also KN8 group showed milk intake different in respect of KT8 (p<0.01) and KT6 (p<0.05) groups. Solid feed intake was significantly (p<0.05) lower in group KT6 (23.1 vs. 26.2 vs. 26.8 g/d, respectively for groups KT6, KN8, KT8). At weaning the kits of group KN8 always weighed more (966 vs. 894 vs. 888 g; p<0.01, respectively for groups KN8, KT6, KT8). After weaning, no parameter considered (daily weight gain, feed intake, feed conversion ratio, mortality and risk sanitary index) was affected by birth weight and litter size.

• 한국태양에너지학회 논문집
• /
• 제35권5호
• /
• pp.21-29
• /
• 2015

In this study, the performance of hybrid solar air-water heater when the heated air was used as inlet air was investigated during air and liquid were heated simultaneously. Temperature difference between inlet air and ambient was set as $0^{\circ}C$, $13^{\circ}C$ and $22^{\circ}C$ and it was maintained during the daily operation. As a result, thermal efficiency of liquid heating was increased when the inlet air temperature was increased and heat gain of the water in heat storage tank was also increased with increment of temperature difference between inlet air and ambient temperature. On the contrary to this, the decrement of air heating efficiency and total efficiency of collector was confirmed with increment of inlet air temperature and it is considered that heat gain of liquid side is lower than heat loss of air side that occurring by using heated air as inlet air of collector. So, from these results, maximum temperature that the liquid in heat storage tank can reach was expected to increase if the return air or any heated air was used as inlet air. But air and total efficiency of hybrid solar air-water is decreased, so using outdoor air as inlet air is considered as better way on perspective of using of solar thermal energy by hybrid solar collector. However, it is hard to conclude that using outdoor air is better than heated air on the perspective of energy saving of building because the performance of heat storage performance was increased even air and total thermal efficiency was decreased, so the necessity of more profound consideration about these result in further research was confirmed for putting the hybrid solar air-water heater to practical use.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.165-174
• /
• 2007

The subject of this study was male apparatus gymnastics athlete who had scored high points doing basket with 1/2 turn on parallel bars. Then 3D motion analysis were used to calculate & analyse kinematic variables of Basket with 1/2 turn to Handstand. 1. The total average time spent for Basket with 1/2 turn took $2.16{\pm}.08sec$, at the downward upward phase took $.58{\pm}0.00sec$, $.23{\pm}.00sec$, at flight phase took $.28{\pm}.01sec$, at connected area phase took $.72{\pm}0.21sec$, at rotation area phase took $.35{\pm}.14sec$. To have a successful performance, there should be faster speed and velocity to rotate at the downward upward phase, then the upward velocity and height must be used adequately. Moreover, the speed must be faster at the flight connect phase to stabilize Center of Mass(CM) for the body, and must secure more time at the rotation area to have more stable performance. 2. After handstand on parallel bars while moving CM to right hand side, and It must be performed with big and magnificent performance with putting both hand's center to far away from the parallel bars. 3. Furthermore, CM must be moved fast from downwards to right hand side, and CM must be moved fast in vertical movement at upward and flight phase to avoid CM from moving back and forth, and left and right. 4. At downwards, the subject must rotate as bis as possible using hip-joint as wide as possible and at upwards, must put his body to vertical to have stable performance. While rotating or turning, it is better to do with bigger shoulder angle and have to make sure that trunk angle must be not scattered. To perform better and more positive in basket with 1/2 turn on parallel bars, the centrifugal force must be used big and fast at downward, and at upward and flight phase, downward movement must change to vertical movement as soon as possible while turning movement must happen at handstand position. Time spent must be shorten at connected area to stabilize CM and turning must be natural as possible while securing the necessary time of movement to well-balanced. Also, the body must be vertically closed from the ground.