• 제목/요약/키워드: purity analysis

검색결과 496건 처리시간 0.03초

고순도 용제 회수 시스템의 공정 조건 탐색을 위한 AMESim 모델 개발 (Developing AMESim Model to Find out Process Condition of High Purity Solvent Recovery System)

  • 김대현;주강우;김광선
    • 반도체디스플레이기술학회지
    • /
    • 제14권4호
    • /
    • pp.8-12
    • /
    • 2015
  • As NMP (N-Methyl-2pyrrolidone) is becoming important in many fields, the demand for it is also rising rapidly. With its chemical property of high boiling point, low vapor pressure and high water solubility, it is easy to recover it after processing. Therefore, it is increasingly needed to develop a system that effectively recovers NMP solvent. The study produced a system modeling using AMESim software before developing high purity solvent recovery (HPSR) system to recover NMP solvent. Then, it verified reliability by comparing the simulation model with the test result.

망점면적비율에 대한 색인쇄물의 측색학적 해석과 Munsell 표색계와 관계 (Colorimetric Analysis and Matching the Notation of the Munsell System for Reproduced Colors with Variable Dot Area Rates)

  • 이상남
    • 한국인쇄학회지
    • /
    • 제1권1호
    • /
    • pp.7-41
    • /
    • 1983
  • Reproduced colors which are half-tone printed at the rate of 10,20,30, ...100% half-tone dot area by each process ink- cyan, magenta, yellow and at the rates of 0,30,60, 100% half-tone dot areas by the mean color mixing of black, cyan, magenta and yellow, are colorimetric analyzed by make use of the 1931 CIE XYZ system of color specification and matching the Munsell color system. Espacially, magenta and secondary colors which are contained magenta, do not have good uniformity and proportionalization in the dominant wavelength and the excitation purity. Half-tone colors without reflection of blue light, are reproduced ideal color with the excitation purity 100% in wavelengths from 555nm to 600nm.

  • PDF

Installation and Test Run of Comprehensive Analysis System for SF6 in Power Equipment

  • Lee, Jeong Eun;Kim, Kwang Sin;Kim, Ah Reum;Park, Seoksoon;Kim, Kyeongsook
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제3권1호
    • /
    • pp.41-47
    • /
    • 2017
  • After $SF_6$, which is being used in power equipment as an insulating material, is classified as one of the 6 major greenhouse gases, the maintenance and the refinement of used $SF_6$ started to get attention. In regard to this, KEPCO Research Institute (KEPRI) is developing $SF_6$ recovery and refinement technology starting with establishing a comprehensive $SF_6$ analysis system. With the analysis system, qualitative and quantitative analyses of the purity and the impurities of $SF_6$ before and after recovery, and before and after refinement have been carried out. The analysis system is comprised of GC-DID (Gas Chromatograph -Discharge Ionization Detector) for trace impurities analysis, GC-TCD (Thermal Conductivity Detector) for analyses of $SF_6$ purity and major impurities concentration from several hundred ppm up to percent range, GC-MSD (Mass Selective Detector) for analyses of impurities not included in standard gas, FT-IR (Fourier Transform-Infrared) Spectrometer for analysis of HF and $SO_2$, and moisture analyzer for analysis of moisture below 100 ppm. With this analysis system, complete analysis method of $SF_6$ has been established. This analysis system is being used in the maintenance of power equipment and the development of $SF_6$ recovery and refinement technologies. In this paper, the analysis results of four samples - gas and liquid phase $SF_6$ samples from a $SF_6$ refinement system before and after refinement are presented.

석고 및 석고 슬러리에 대한 분석방법의 비교 (The Comparison of Analytical Methods for Gypsum and Gypsum Slurry)

  • 김경숙;양석란;박현주;임춘식
    • 분석과학
    • /
    • 제13권2호
    • /
    • pp.158-165
    • /
    • 2000
  • 배연탈황설비에서 생성된 석고 슬러리 및 석고의 순도와 불순물의 정량분석은 시운전중인 탈황설비의 성능시험시 최적의 탈황공정을 모색하는 데 유용한 자료를 제공할 뿐만 아니라 생성된 석고는 시멘트나 석고 보드 등으로 사용될 수 있으므로 품질관리의 측면에서도 매우 중요하다. 석고의 순도는 결합수분, 삼산황 및 칼슘이온의 농도를 측정한 다음 환산식에 의해서 gypsum($CaSO_4{\cdot}2H_2O$)의 형태로 변환할 수 있다. 성능시험시 시료의 수가 상당히 많으므로, 좀 더 간편하면서도 정확한 분석방법의 확립을 위해 여러가지 비교실험을 실시한 결과, 열분석을 통하여 결합수분을 측정하는 방법이 1시간 이내에 분석이 완료된다는 장점 외에 재현성 또한 아주 우수하였다. 그 외 실리카를 포함한 각종 석고의 불순물의 분석은 산으로 처리하는 방법과 융제를 사용한 용융법을 비교한 결과, 용융법이 훨씬 간편하고 정확한 결과를 나타내었다. 한편 소량의 탄산 마그네슘과 탄산 칼슘의 정량을 위해 사용되는 이산화탄소 측정장치의 트랩부분을 수정하여 이산화탄소 흡수제의 역류를 막도록 하였다. 열분석을 통한 결함수분 측정, 융제를 사용한 용융법 및 이산화탄소의 정량법으로 확립된 분석 방법을 통해 석고 슬러리 및 석고의 분석은 보다 짧은 시간내에 간편하면서도 정확하게 실시될 수 있음을 확인하였다.

  • PDF

F-RATIONALITY OF A PURE SUBRING OF AN F-RATIONAL RING

  • Moon, Myung-In
    • 대한수학회논문집
    • /
    • 제12권4호
    • /
    • pp.851-854
    • /
    • 1997
  • In this paper we will show that the pure subring R of F-rational ring S is F-rational when R is a one-dimensional ring, or S is a Gorenstein ring. And we will give a condition that a pure subring of an F-rational ring is to be F-rational.

  • PDF

2013년 시판된 나프록센의 광학순도 측정 (Measurement of Optical Purity for Commercially Avialable Naproxen Sold in 2013)

  • 서해찬;송정석;류상현;이상헌;류동현;유정재;류재정
    • 대한화학회지
    • /
    • 제58권2호
    • /
    • pp.179-185
    • /
    • 2014
  • 시판되는 (S)-naproxen을 강염기 조건에서 라세미화하였다. 라세미화된 naproxen 시료를 분석하여 (R)- 및 (S)-naproxen의 피이크 위치를 확인한 후, 2013년 국내에서 시판된 19개 naproxen의 광학순도를 키랄 HPLC로 조사하였다. Chiralcel OD-H 칼럼과 ChiralHyun-LE(S)-1 칼럼 및 LUX-Cellulose-1 칼럼을 키랄 정지상으로 사용하였고, hexane:isopropanol:acetic acid가 100:1:0.1로 혼합된 용액을 전개용매로 사용하여 흐름속도 1.0 mL/min에서 분석하였다. 각 시료를 최소 3회 이상 분석하여 얻은 평균값을 각각 계산하여 데이터로 이용하였고, 이들의 상대표준편차도 계산하여 그 값이 아주 작게 나타난 것을 확인하였다. 세 종류의 다른 칼럼에서 각각 측정한 광학순도 값이 서로 아주 유사한 값을 보여주었으며, 측정된 naproxen의 광학순도는 이들의 광학순도 데이터가 처음 보고된 2010년 시료의 광학순도 평균값인 98.17%에 비해 높은 99.32%를 보였다.

꼬막 패각으로 제조한 젖산칼슘과 구연산칼슘의 순도 향상에 대한 연구 (Purity Improvement of Calcium Lactate and Calcium Citrate Prepared with Shell of Anadarac tegillarca granosa)

  • 강미숙;소관순;신동화
    • 한국식품위생안전성학회지
    • /
    • 제20권3호
    • /
    • pp.128-133
    • /
    • 2005
  • 꼬막 패각 회화분을 이용하여 칼슘 보조제로서 사용 할 수 있는 젖산칼슘과 구연산칼슘을 제조하였으며, ammonium chloride process(ACP) ammonium nitrate process(ANP)법을 적용하여 이들의 순도를 높이기 위한 실험을 하였다. 꼬막 패각 회화분을 젖산용액과 구연산용액과 반응시켜 얻은 젖산칼슘과 구연산칼슘의 순도는 각 용액의 농도에 따라 각각 $94.35-96.72\%$$87.58-93.06\%$이었다. 꼬막 패각 회화분에 ACP법 혹은 ANP법을 적용하여 정제한 탄산칼슘으로 제조한 젖산칼슘과 구연산칼슘의 순도는 각 용액의 농도에 따라 각각 $99.53-100.34\%$$99.32-99.88\%$를 나타내어 꼬막 패각 회화분을 직접 이용하여 제조한 것보다 순도가 상당히 높아졌으며, 식품첨가물공전의 규격기준에 적합한 칼슘제제를 얻을 수 있었다 꼬막 패각 회화분으로 제조한 젖산칼슘과 구연산칼슘의 백색도는 각각 91.8과 92.9이었으나 ACP법 혹은 ANP법을 적용한 경우는 각각 94.8-98.5와 99.4-101.5로서 높은 값을 나타내었다. 따라서 폐기물로 버려지는 꼬막 패각 회화분에 ACP법과 ANP법을 적용하여 정제한 탄산칼슘으로 제조한 젖산칼슘과 구연산칼슘은 순도와 백색도에서 우수한 것으로 판단되었다.

Electrical Properties of Transparent Conductive Films of Single-Walled Carbon Nanotubes with Their Purities

  • ;;;이내성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.56-56
    • /
    • 2010
  • Single-walled carbon nanotubes (SWCNTs) have attracted much attention as a promising material for transparent conducting films (TCFs), due to their superior electrical conductivity, high mechanical strength, and complete flexibility as well as their one-dimensional morphological features of extremely high length-to-diameter ratios. This study investigated three kinds of SWCNTs with different purities: as-produced SWCNTs (AP-SWCNTs), thermally purified SWCNTs (TH-SWCNTs), thermally and acid purified SWCNTs (TA-SWCNTs). The purity of each SWCNT sample was assessed by considering absorption peaks in the semiconducting ($S_{22}$) and metallic ($M_{11}$) tubes with UV-Vis NIR spectroscopy and a metal content with thermogravimetric analysis (TGA). The purity increased as proceeding the purification stages from the AP-SWCNTs through the thermal purification to the acid purification. The samples containing different contents of SWCNTs were dispersed in water using sodium dodecyl benzensulfate (SDBS). Aqueous suspensions of different purities of SWCNTs were prepared to have similar absorbances in UV-Vis absorption measurements so that one can make the TCFs possess similar optical transmittances irrespective of the SWCNT purity. Transparent conductive SWCNT networks were formed by spraying an SWCNT suspension onto a poly(ethyleneterephthalate) (PET) substrate. As expected, the TCFs fabricated with AP-SWCNTs showed very high sheet resistances. Interestingly, the TH-SWCNTs gave lower sheet resistances to the TFCs than the TA-SWCNTs although the latter was of higher purity in the SWCNT content than the former. The TA-SWCNTs would be shortened in length and be more bundled by the acid purification, relative to the TH-SWCNTs. For both purified (TH, TA) samples, the subsequent nitric acid ($HNO_3$) treatment greatly lowered the sheet resistances of the TCFs, but almost eliminated the difference of sheet resistances between them. This seems to be because the electrical conductivity increased not only due to further removal of surfactants but also due to p-type doping upon the acid treatment. The doping effect was likely to overwhelm the effect of surfactant removal. Although the nitric acid treatment resulted in the similar. electrical properties to the two samples, the TCFs of TH-SWCNTs showed much lower sheet resistances than those of the TA-SWCNTs prior to the acid treatment.

  • PDF

Microsatellite Marker를 이용한 멜론 시판품종의 품종식별과 F1 순도검정 (Use of Microsatellite Markers to Identify Commercial Melon Cultivars and for Hybrid Seed Purity Testing)

  • 권용삼;홍지화
    • 원예과학기술지
    • /
    • 제32권4호
    • /
    • pp.525-534
    • /
    • 2014
  • Microsatellite 표지를 이용하여 국내에서 시판되고 있는 멜론 58품종의 식별과 멜론 육종 계통 '10H08'을 이용하여 $F_1$ 종자 순도를 평가하였다. 412개의 microsatellite 표지 중 다형성 정도가 높은 29개는 품종 그룹 내에서도 다양한 유전 변이를 나타내었으며 분자표지의 유전자형에 의해 모든 품종을 식별할 수 있었다. Microsatellite 표지의 대립유전자를 이용하여 멜론 58품종에 대한 계통도를 작성하였을 때 멜론의 형태적 특성과 일치하면서 2개의 대그룹으로 구분되었다. $F_1$ 종자의 순도 검정에 microsatellite 표지를 활용하기 위하여 29개의 표지를 '10H08' 계통의 양친에 대하여 검정하였을 때 5개의 프라이머가 다형성을 보였으며, 이 중 한 개의 프라이머 'CMGAN12'는 양친간에 뚜렷한 다형성 밴드를 나타내었다. 이 프라이머를 192개의 $F_1$ 종자에 대하여 검정하였을 때 자식주로 보이는 개체가 분석된 종자 내에서 명확하게 구분되었다. 본 연구 결과에서 선정된 멜론 품종 식별용 microsatellite 표지는 멜론 품종의 지문화뿐만 아니라 $F_1$ 종자의 순도 검정이 가능하여 종자회사에서 매우 유용하게 활용될 수 있는 것으로 나타났다.

사람 혈장으로부터 고순도 혈액응고 제9인자의 산업적 생산 (Industrial-Scale Production of High-Purity Antihemophilic Factor IX from Human Plasma)

  • 강용;최용운;성학모;손기환;신정섭;김인섭
    • KSBB Journal
    • /
    • 제23권1호
    • /
    • pp.37-43
    • /
    • 2008
  • (주)녹십자는 1986년 "훽나인"을 B형 혈우병 치료제로 제조품목허가를 받아 B형 혈우병치료제 공급을 시작하였다. 또한 1991년 New York Blood Center에서 selvent/detergent 바이러스 불활화 방법을 도입하여 제조공정에 추가한 후 혈액유래 바이러스로부터 안전한 제품을 생산하여 왔다. 하지만 이 제품은 혈액응고 제2인자, 제7인자, 제10인자가 함유된 제9인자 복합체로, 정맥 혈전증과 파종성 혈관내응고병증 같은 혈전형성 부작용이 일어날 가능성이 있어, 훽나인보다 순도, 유효성, 바이러스 안전성이 우수한 제품의 개발이 필요하였다. 이를 위해 고순도 제9인자 제제인 "GreenNine VF" 제조공정을 개발하였다. GreenNine VF 제조공정은 기존의 훽나인 생산 공정에 heparin 친화성 크로마토그래피와 양이온 크로마토그래피가 추가된 공정으로, 바이러스 안전성을 증진시키기 위한 바이러스 필터 공정도 포함하고 있다. 이러한 공정에 의해서 산업적 규모로 생산된 GreenNine VF는 훽나인에 비해 순도와 바이러스 안전성이 월등히 높은 것으로 확인되었다. 또한 고순도 혈액응고 제9인자 제제인 Mononine, Octanyne, Berinin HS, Immunine STIM plus 600보다 순도가 더 높았다. Cryo-poor plasma 1,600 L를 원료로 사용했을 때 1 batch 당 250IU 분병제품 2,400병 이상, 500 IU 분병제품 1,200병 이상을 생산할 수 있었다.