• Journal of Community Nutrition
• /
• 제5권2호
• /
• pp.105-111
• /
• 2003

Balanced intake of appropriate nutrients is the key to sustaining and promoting health as well as preventing and treating diseases. It is not always easy, however, to take balanced nutrition and various related factors must be taken into consideration. This report provides a summary of studies that have examined the nutrient intakes of Japanese middle-aged men and the relationship of this intake to drinking, job-related separation from families, and health practices. The alcohol consumption of Japanese middle-aged men has more than tripled in the last forty years. When nutrient intake was examined in relation to alcohol consumption, it was discovered that the maximum acceptable alcohol consumption was approximately 23 grams (about two drinks) of pure alcohol, provided the level of nutrient intake for drinkers was equal to that of non-drinkers. The alcohol energy ratio was approximately 5％. It was also discovered that middle-aged men's eating habits deteriorate when they relocate to new posts without their families and live by themselves. Compared to those living with their families, a higher proportion of those living alone have unfavorable eating habits including skipping breakfast or lunch, having a late lunch, and eating and drinking after dinner until bedtime. When Breslow's seven health practices, nutrient intake, and consumption weight by food group were examined, it was discovered that the group that had many beneficial eating and living habits consumed plenty of legume, pulses, fruit, green yellow vegetables and milk products. Their intake of vitamins and minerals was high and the results of a physical examination proved to be excellent. According to nutrition surveys conducted in Japan, China, the United Kingdom and the United States using a 24-hour recall method with common protocols and strict controls to ensure high levels of accuracy and cross-study validity, the Japanese had the highest cholesterol intake and the lowest dietary fiber intake among the four countries. Also, the alcohol energy ratio of the Japanese exceeded 8％, the highest among the four countries, while their intake of magnesium and iron was the lowest These results indicate that it is necessary to enhance nutritional education for middle-aged men and to reinforce the social environments in which they live and work in order to promote proper diet and nutrition in Japan. (J Community Nutrition 5(2) : 105-111, 2003)

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.612-619
• /
• 2002

The dynamic behavior of Al-Mg alloys plasma was very unstable and this instability was closely related to the unstable motion of keyhole during laser irradiation. The keyhole fluctuated both in size and shape and its fluctuation period was about 440 ${\mu}{\textrm}{m}$. This instability has been estimated to be caused by the evaporation phenomena of metals with different boiling point and latent heats of vaporization. Therefore, the authors have conducted the spectroscopic diagnostics of plasma induced in the pulsed YAG laser welding of Al-Mg alloys in air and argon atmospheres. In the air environment, the identified spectra were atomic lines of Al, Mg, Cr, Mn, Cu, Fe and Zn, and singly ionized Mg line, as well as strong molecular spectrum of AlO, MgO and AIH. It was confirmed that the resonant lines of Al and Mg were strongly self-absorbed, in particular in the vicinity of pool surface. The self-absorption of atomic Mg line was more eminent in alloys containing higher Mg. These facts showed that the laser-induced plasma was relatively a low temperature and high density metallic vapor. The intensities of molecular spectra of AlO and MgO were different each other depending on the power density of laser beam. Under the low power density irradiation condition, the MgO band spectra were predominant in intensity, while the AlO spectra became much stronger in higher power density. In argon atmosphere the band spectra of MgO and AlO completely vanished, but AlH molecular spectra was detected clearly. The hydrogen source was presumably the hydrogen solved in the base Metal, absorbed water on the surface oxide layer or H$_2$ and $H_2O$ in the shielding gas. The temporal change in spectral line intensities was quite similar to the fluctuation of keyhole. The time average plasma temperature at 1 mm high above the surface of A5083 alloy was determined by the Boltzmann plot method of atomic Cr lines of different excitation energy. The obtained electron temperature was 3, 280$\pm$150 K which was about 500 K higher than the boiling point of pure aluminum. The electron number density was determined by measuring the relative intensities of the spectra1lines of atomic and singly ionized Magnesium, and the obtained value was 1.85 x 1019 1/㎥.

• 자원환경지질
• /
• 제26권1호
• /
• pp.41-54
• /
• 1993

경상분지 남동부에 위치한 울산광산은 석회암을 교대한 전형적인 calcareous skarn강상으로 Fe W광화작용 이외에도 Cu, Pb, Zn, As, Bi, Ni, Co, Cr, Ag, Sn, In, Te, Sb 등이 수반되는 다금속광화작용의 특성을 보여주고 있다. 본 광상은 직립에 가까운 파이프상 광체로 산출되며, 자철석과 함께 북측의 혼펠스와의 경계부근에 회중석이 부분적으로 광염되어 있다. 본 광상의 스카른대는 석회암 및 혼펠스를 교대한 괴상 스카른과 양자를 각기 절단하는 맥상스카른으로 구분된다. 괴상스카른은 석회암 기원의 스카른이 주체를 이루며, 이러한 스카른대는 규회석 스카른, 석류석 스카른, 단사휘석-석류석 스카른, 단사휘석 스카른으로 분류되며, 부분적으로 스카른대 주변부를 따라 거정질 방해석대가 존재하고 있다. 스카른 진화과정은 초기스카른 및 후기스카른의 두 시기로 분류되며, 초기스카른은 prograde한 스카른 생성시기로 초기에는 규회석, Mg-rich 단사휘석, Al-rich garnet가 주로 정출되며 광석광물은 거의 불모한 시기이나, 초기스카른의 말기로 진행됨에 따라 자철석과 회중석이 정출된다. 그리고, 후기스카른의 전반기까지는 Fe-rich 단사휘석, Fe-rich garnet와 함께 자철석 회중석이 연속적으로 정출되었으나, 후기스카른의 중기부터는 Ni, Co, As, Cu, Zn, Fe, Bi 등의 황화광물이 정출되는 다금속광화 작용의 특정을 보인다. 또한, 최후기 열수작용시기에는 섬아연석과 방연석 등의 Base-metal 황화광물이 주로 정출되는 연 아연 광화작용의 양상을 나타낸다. 이러한 각 광화시기별 스카른 광물과 광석광물의 변화양상은 고온의 열수용액이 천부로 유출되는 과정에서 광화용액의 온도가 급격히 떨어진 결과 (telescope)에 기인된 것으로 사료된다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.75-75
• /
• 2018

Commercially pure titanium (CP-Ti) and Ti-6Al-4V alloys have been widely used in implant materials such as dental and orthopedic implants due to their corrosion resistance, biocompatibility, and good mechanical properties. However, surface modification of titanium and titanium alloys is necessary to improve osseointegration between implant surface and bone. Especially, when titanium oxide nanotubes are formed on the surface of titanium alloy, cell adhesion is greatly improved. In addition, plasma electrolytic oxide (PEO) coatings have a good safety for osseointegration and can easily and quickly form coatings of uniform thickness with various pore sizes. Recently, the effects of bone element such as magnesium, zinc, strontium, silicon, and manganese for bone regeneration are researching in dental implant field. The purpose of this study was researched on the surface morphology of PEO-treated Ti-6Al-4V alloy after anodic titanium oxide treatmentusing various instruments. Ti-6Al-4V ELI disks were used as specimens for nanotube formation and PEO-treatment. The solution for the nanotube formation experiment was 1 M $H_3PO_4$ + 0.8 wt. % NaF electrolyte was used. The applied potential was 30V for 1 hours. The PEO treatment was performed after removing the nanotubes by ultrasonics for 10 minutes. The PEO treatment after removal of the nanotubes was carried out in the $Ca(CH_3)_2{\cdot}H_2O+(CH_3COO)_2Mg{\cdot}4H_2O+Mn(CH_3COO)_2{\cdot}4H_2O+Zn(CH_3CO_2)_2Zn{\cdot}2H_2O+Sr(CH_2COO)_2{\cdot}0.5H_2O+C_3H_7CaO_6P$ and $Na_2SiO_3{\cdot}9H_2O$ electrolytes. And the PEO-treatment time and potential were 3 minutes at 280V. The morphology changes of the coatings on Ti-6Al-4V alloy surface were observed using FE-SEM, EDS, XRD, AFM, and scratch tester. The morphology of PEO-treated surface in 5 ion coating solution after nanotube removal showed formation or nano-sized mesh and micro-sized pores.

• Journal of the Korean Wood Science and Technology
• /
• 제7권2호
• /
• pp.3-30
• /
• 1979

우리나라에서는 일본잎갈나무가 대량(大量) 조림(造林)되어 축적(蓄積)과 생장량(生長量)으로 보아 주요(主要)한 조림(造林) 수종(樹種)이나 각종(各種) 추출물(抽出物)과 활성(活性) phenol 성분(成分)이 많고 심재율(心材率)이 높아 펄프화(化)에서 수율저하(收率低下)와 표백곤란(漂白困難)이 초래(招來)되어 펄프원료(原料)로서의 이용(利用)이 기피(忌避)되고 있다. 따라서 일본잎갈나무의 화학(化學)펄프 원료화(原料化)의 제고(提高)로서 펄프수율(收率) 향상(向上)과 표백성(漂白性) 개선(改善)을 위하여 셀룰로오스보호제를 첨가(添加)한 소다펄프화(化) 특성(特性)을 구명(究明)하였다. 증해(蒸解)는 최고온도(最高溫度) 170$^{\circ}C$까지 90분간(分間) 가열(加熱)하고 90분간(分間) 유지(維持)하는 일정조건(一定條件)으로 황화도(黃化度) 25%, 활성(活性)알칼리 18%의 크라프트법(法)으로 일본잎갈나무의 수령별(樹齡別) 펄프화(化) 특성(特性)을 구명(究明)하고, 18%활성(活性) 알칼리의 소다증해(蒸解)에 첨가제로 2.5% $MgSO_4$, 2.5% $ZnSO_4$, 2.5% $Al_2(SO_4)_3$, 2.5% KI, 2.5% hydroquinone, 2.5% ethylene diamine 또는 0.1~1.0% anthraquinone를 가(加)하여 15년생(年生) 일본잎갈나무의 변재(邊材)와 심재별(心材別) 소다펄프화(化) 특성(特性)을 구명(究明)한 후(後), 0.5% anthraquinone과 18% 활성(活性)알칼리로 증해(蒸解)된 펄프를 3%, 6%, 9% NaOH를 투입(投入)한 30%의 고농도(高農度)펄프를 상압(常壓) 산소표백(酸素漂白)하고, 이산화염소(二酸化鹽素)의 DED로 계속표백(繼續漂白)한 결과(結果) 다음과 같은 결론(結論)을 얻었다. 1. 일본잎갈나무의 수령별(樹齡別) 크라프트펄프는 수령간(樹齡間)에 펄프의 정선수율(精選收率)은 차(差)가 없으나, 수령(樹齡)이 증가함에 따라 펄프의 총수율(總收率)은 감소(減少)하고 비인열도(比引裂度)는 증가하였으며, 목재(木材)의 심재율(心材率), 용적밀도(容積密度) 수(數), 섬유장(纖維長) 및 온수추출물(溫水抽出物)도 증가하는 경향(傾向)을 나타냈다. 2. 일본잎갈나무의 변재(邊材)와 심재별(心材別) 소다증해(蒸解)에 셀룰로오스 보호제로 첨가(添加)된 7종(種)의 첨가제들은 변재(邊材)와 심재(心材)펄프화(化)에 대한 영향(影響)이 대체로 소다법(法)보다 증가되었으나 크라프트법(法)에 미치지 못하고, 크라프트펄프법(法)에 가까운 첨가제는 펄프수율(收率)에서 KI $MgSO_4$, anthraquinone이며, 특(特)히 다른 첨가제의 25분(分) 1이 첨가(添加)된 anthraquinone은 펄프의 정선수율(精選收率)과 KappaNo. 및 비파열도(比破裂度)에서 다른 첨가제보다 효과적이었다. 3. anthraquinone첨가량(添加量)에 따른 변재(邊材)와 심재별(心材別) 소다펄프의 품질(品質)은 변재(邊材)와 심재(心材) 모두 첨가량(添加量)이 많을수록 탈(脫)리그닌도(度)와 펄프수율(收率)이 높으나 활성(活性)알칼리가 낮으면 정선수율(精選收率)도 낮았으며 활성(活性)알칼리 17%의 소다 증해액(蒸解液)에 0.5% anthraquinone을 첨가(添加)한 조건(條件)에서는 크라프트펄프보다 비교적(比較的) 양호(良好)한 펄프가 얻어졌다. 4. 일반화(一般化)된 CEDED표백중(漂白中) 염소화(鹽素化)와 알칼리 추출단계(抽出段階) 대신(代身)에 30%의 고농도(高濃度)펄프에 상압(常壓) 산소표백(酸素漂白)한 ODED표백(漂白)은 산소단계(酸素段階)에서 변재(邊材)와 심재(心材)펄프 모두 NaOH투입량(投入量)이 증가될수록 백색도(白色度)와 비인열도(比引裂度)가 향상(向上)되나 펄프수율(收率)과 Kapa No.는 감소(減少)되었으며, NaOH 투입량(投入量)이 높을수록 펄프품질(品質)은 CEDED 표백(漂白)과 유사(類似)하나 펄프수율(收率)이 떨어졌다. 5. 따라서 본(本) 실험(實驗)에서는 펄프수율(收率) 향상(向上)을 위해서는 원료(原料)에서 심재율(心材率)이 낮은 수령(樹齡)의 경우가 펄프재(材)로 적당(適當)하고, 0.5% anthraquinone을 첨가(添加)한 활성(活性)알카리 18%의 소다증해(蒸解)하는 것이 적당(適當)하며 폐수중(廢水中)의 염소화합물(鹽素化合物)을 감소(減少)시키기 위하여서는 펄프농도(濃度) 30%이상(以上)의 고농도(高濃度)에서 상압(常壓) 산소(酸素)로 표백후(漂白後) 이산화(二酸化) 염소(鹽素)로 DED 표백(漂白)하면 일본잎갈나무의 크라프트법(法)보다 비교적(比較的) 우수(優秀)한 펄프를 얻을 수 있다.