• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.469-471
• /
• 1999

In this paper, the method of Space-Vector Pulse Width Modulation(SVPWM) with Fuzzy Logic Regulator(FLR) is proposed. In a conventional SVPWM, the procedures of phase transformation and choosing PWM patterns are complex. So, it should be implemented with high performance processor like Digital Signal Processor(DSP). In order to reduce a calculation burden, a proposed system adopts FLR. Using a linguistic contro strategy based on expert knowledge, FLR relieves the processor from a heavy computations. In simulations, the proposed system is validated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.756-759
• /
• 2003

We measure the spatiotemporal wall charge distributions on sustain and address electrodes during reset period in an ac PDP cell using the longitudinal electro-optic amplitude modulation method. We apply several reset waveforms like as ramp, exponentially growing and high voltage pulse, and compare the wall charge characteristics on address electrode as well as sustain electrodes for each reset waveforms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.564-565
• /
• 2005

AC induction motor equipped in electric train is driven by VVVF inverter which produces switching pulse like impuse. Impulse voltage is more dangerous than continuous alternative voltage for the insulating performance of AC induction motor. This paper has investigated PD characteristics caused by impuse voltage for stator coils inserted in AC induction motor.

• Journal of the Korean Vacuum Society
• /
• v.5 no.1
• /
• pp.1-5
• /
• 1996

Noncrystalline films of diamond-like carbon (DLC) have been prepared by laser ablation technique at room temperature. A Q-switched Nd-YAG laser beam with wavelength of 1064 nm and pulse duration of 10 ns was focused onto a graphite target with power densities of about $10^9 W/\textrm{cm}^2$. The physical properties of the resulting films were analyzed with density, hardness, and resistivity measurements. The surface and bonding structure were investigated by atomic force microscopy (AFM), Raman spectroscopy, electron energy loss spectroscopy (EELS).

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.42-44
• /
• 1995

The original DANTE sequence and its variations have limitation in excitation profile (a sinc function-like excitation) due to the finite duration of the DANTE pulsetrain. This sinc function-like selection profile excites only a small fraction of the spins in the pixel thereby results in poor signal to noise ratio (only about ${\sim}1%$ of normal MR imaging sequence). Therefore, this poor signal to noise ratio (SNR) has been the main drawback of the original DANTE sequence. To improve the signal to noise ratio, phases of individual RF pulses in the DANTE pulse train were modulated so that more spins in the object were excited ($1{\sim}3$). We have introduced a new FM (Frequency Modulation) DANTE sequence and analyzed the signal intensity and excitation profiles.

• Journal of the Korean Society of Safety
• /
• v.12 no.2
• /
• pp.95-101
• /
• 1997

The confidence of new technology development for NO_x$ components elimination is obtained as conclusion based 1ike followings ; 1) The technology using PSC spark is a excellent methods for NO_x$ components elimination above 70% without by-product pollutants. 2) Some materials like Oxygen, Vaporized Water and Ammonia, increase the of NO_x$ elimination by staged addition. 3) Environmental conditions like pulse frequency and peak voltage are the important dosing factors for pollutants elimination effects. 4) As the PSC technic is the up-to-date one for pollutions elimination the research and development must be executed continuously for the purpose of theoretical establishment. And the application field must be broaden in future.

• Journal of Periodontal and Implant Science
• /
• v.27 no.3
• /
• pp.469-478
• /
• 1997

The purpose of this study was to evaluate the structural change of root surface and the occlusion of dentinal tubule following $CO_2$ laser treatment. Seven extracted healthy human premolar werw curetted, sectioned, and four specimens were randomly assigned to each of 6 different treatment groups : 1) untreated EDTA etched control: 2) root plande only: 3) $CO_2$ laser treated with 2W mode 6(10msec/pulse, 20pps) for 1 minute: 4) $CO_2$ laser treated with 2W mode 6(lOmsec/pulse, 20pps) for 2 minutes: 5) $CO_2$ laser treated with 2W mode 7(20msec/pulse, 20pps) for 1 minute: 6) $CO_2$ laser treated with 2W mode 7(20msec/pulse, 20pps) for 2 minutes. Following the prescribed treatment, the specimens were prepared for SEM evaluation. Results showed that $CO_2$ laser may be effective to occlude dentinal tubules tor dentin sensitivity treatment. The effect of dentinal tubule occlusion was enhanced with increasing the total energy level lased to specimen regardless of lasing mode. The structural changes of root surfaces were restricted to superficies, and these changes included fissuring, charring, crater formation over the smooth lava like texture. The charring and crater formation implying root damage was observed in the case of the longer duration of a pulse. The results of the present study suggests that the pulsed $CO_2$ laser with shorter pulse duration and longer exposure time can be used effectively in order to obtain the optimal dentinal tubule occlusion with minimal root damage.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1486-1496
• /
• 1993

The diamond wheel with superabrasive is required for mirror-like surface grinding of brittle materials. But the conventional dressing mothod can not apply to the diamond wheel with superabrasive. Recently electrolytic dressing method was developed for cast-iron bonded diamond wheel with superabrasive. This technique can take replace of lapping and polishing. Using the electrolytic dressing, the surface roughness of workpiece was improved largely and grinding force was very low and the continuity of the grinding force was also very improved. In this study, the purpose is the realization of mirror-like surface grinding of ferrite with electrolytic dressing of metal bonded diamond wheel. For application of ultraprecision grinding for brittle material, superabrasive wheel, air spindle and inprocess electrolytic dressing were used. In addition, the effects of pick current and pulse width on ground surface were investigated, and the suitable dressing conditions for ferrite were found out.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.67-74
• /
• 2008

In this paper we describe discharge characteristics between needle-to-plane electrodes in water in various conditions such as different impulse voltages, polarities and water resistivities. Streamer corona is initiated at the tip of needle electrode and propagates toward plane electrode, and it experiences the final jump across the test gap. The branched channels of streamer coronas for lower water resistivities are much thicker and brighter than those for higher water resistivities at the same level of applied voltage. The negative streamer coronas not only have more branches but also widely spread out compared to the positive streamer coronas. A number of pulse-like currents ranging from some hundreds mA to a few A after streamer corona onset were produced with discharge developments. The time-lags-to breakdown for the positive polarity were remarkably shorter than those for the negative polarity. The pre-breakdown energy supplied into the test gap was inversely proportional to water resistivity.

• Annals of Clinical Neurophysiology
• /
• v.13 no.1
• /
• pp.1-12
• /
• 2011

Transcranial magnetic stimulation (TMS) is a non-invasive tool used to study aspects of human brain physiology, including motor function and the pathophysiology of various brain disorders. A brief electric current passed through a magnetic coil produces a high-intensity magnetic field, which can excite or inhibit the cerebral cortex. Although various brain regions can be evaluated by TMS, most studies have focused on the motor cortex where motor evoked potentials (MEPs) are produced. Single-pulse and paired-pulse TMS can be used to measure the excitability of the motor cortex via various parameters, while repetitive TMS induces cortical plasticity via long-term potentiation or long-term depression-like mechanisms. Therefore, TMS is useful in the evaluation of physiological mechanisms of various neurological diseases, including movement disorders and epilepsy. In addition, it has diagnostic utility in spinal cord diseases, amyotrophic lateral sclerosis and demyelinating diseases. The therapeutic effects of repetitive TMS on stroke, Parkinson disease and focal hand dystonia are limited since the duration and clinical benefits seem to be temporary. New TMS techniques, which may improve clinical utility, are being developed to enhance clinical utilities in various neurological diseases.