• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.3
• /
• pp.282-290
• /
• 1994

A numerical model for the analysis and design of orifice pulse tube refrigerators has been developed. Heat transfer coefficient and friction factors in the model vary with time, and the real physical properties such as thermal conductivity and viscosity were used to improve the accuracy of the model. Thermodynamic behavior of the working fluid within pulse tube refrigerators was investigated and the effect of design parameters, such as reservoir volume, orifice diameter, and NTU of regenerator, on the cooling load and COP was shown.

• Journal of Welding and Joining
• /
• v.33 no.6
• /
• pp.60-66
• /
• 2015

Molten zone shape of pulse laser welding is affected by welding conditions such as beam power, beam speed, irradiation time, pulse frequency, etc. and is divided into conduction type and keyhole type. It is necessary to design heat source model for irradiation of laser beam in the pulse laser welding. Shape variables and the maximum energy density value of the heat source model are different depending on the molten zone shape. In this paper, pulse laser welding simulation for joining of cylindrical part and circular cover was carried out. The heat source model for pulse laser beam with circular path was applied to the heat input boundary condition, radiative and conductive heat transfer were considered for the thermal boundary condition. For each phase, thermal and mechanical properties according to temperature were also applied to analysis. Analytical results were in good agreement with the molten zone size of specimen under the same welding conditions. So, the reliability of the welding simulation was verified. Finally, the improvements for reducing residual deformation after cover welding could be reviewed analytically.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.601-606
• /
• 2008

U-Healthcare is one of the major applications in ubiquitous sensor network. U-Healthcare has potential to become a critical service for the people who immediately require emergency ambulatory attention. This paper describes about the real time pulse monitoring and reporting system, consisting of two components: thus, the one is a reliable bio-sensor that continuously monitors the pulse information of the subject, and the other is the automatic transfer system that transmits pulse information to both his/her family and hospital care system through the Base Station. In the hospital, this bio-information can be used to treat the patient accordingly. I designed the pulse information monitored by a bio-sensor module that transfers the pulse information to both the Base Station and the central monitoring system through transmitting protocols such as Zigbee and TCP/IP, as well as designed the architecture of information packets for the corresponding protocols. Furthermore, the central monitoring system automatically parses the pulse information of the subject into the web database server, which can continuously provides the real time information and status of the subject via an internet browser to the clients who are family members of the subject and the authenticated medical care personnel as well.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.70-70
• /
• 2002

형질전환 가축을 생산하기 위하여 최근 체세포 복제 기법을 이용하고 있다. 이러한 체세포를 이용한 형질전환 동물의 생산에는 체세포내에 유전자의 도입 효율이 직접적인 영향을 주게 된다. 따라서 본 연구는 세포내 유전자의 transfection 효율을 높이고자 한우의 체세포를 이용하여 여러 가지 조건에서 유전자 도입을 실시하였다. 세포내 유전자 도입 방법은 electroporation (EP) 방법을 이용하였다. 사용한 세포는 소의 귀세포(KbESF), 태아섬유아세포 (KbFF), 그리고 대조구로서 CHO cell을 이용하여 GFP 유전자를 도입하였다. EP는 0.4 cm cuvette을 사용하였고, voltage는 0.25 kV, 그리고 field strength 는 0.625 kV/cm 조건으로 실시하였으며, pulse times은 각각 1, 2, 또는 3회를 사용하였다. KbFF와 KbESF에서는 각각 pulse times을 증가시킬수록 유전자도입 세포수가 증가하였으나 (KbFF: 81, 634, 1,065 cells/$10^{6}$ cells, KbESF: 1,011, 5,567, 15,408 cells/$10^{6}$ cells), CHO cell에서는 pulse times을 증가시킬 수록 오히려 유전자도입 세포수가 감소하였다 (CHO: 1,591, 687, 297 cells/$10^{6}$ cells). 그리고 2주 동안 neo selection을 실시 한 결과 KbFF, KbESF, CHO에서 각각 93, 35, 184 colony가 선발되었으며, 이 중 65.6%, 8.6%, 4.3% 가 GFP 형광 발현 colony로 나타났다. 한편 CHO cell에서 transfection cell수가 감소된 것은 EP의 자극으로 인해 손상된 세포가 많이 발생한 것으로 나타났다. 또한 neo selection에서 선발된 colony중 GFP가 발현되지 않거나 일부만 발현되는 colony들이 많이 발생하였는데, 이것은 세포내 유전자가 transfection되지 않은 세포도 neo selection에서 선발된다는 것을 제시하고 있다. 따라서 체세포를 이용한 형질전환동물 생산을 위해서는 세포내 유전자 도입과 선발 과정에서 나타난 colony에 대하여 보다 엄격한 screen을 하는 것이 필요한 것으로 생각된다.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.3
• /
• pp.282-288
• /
• 1989

Theoretical analysis of DF-$CO_2$ transfer chemical laser is performed through simple kinetic model consisting of 30 chemical reactions. In this model, we calculate the power theoretically by solving the rate equations, which are related to the $D_2\;+\;F_2$ chain reaction and the DF-$CO_2$ resonance energy transfer, combined with both the gain processes and the stimulated emission processes. The calculated powers are verified with previously reported results in good agreements. The output energy rises linearly with the increase in pressure, and the duration time of output pulse show the inverse dependence on pressure. Through the detailed calculation of temperature and concentrations of reactants as a function of time, it is found that the deactivation processes of DF(v) can be neglected in low pressure, but they have to be considered in high pressure. From the parametric study for the variation on [$D_2]/[F_2$] and [$CO_2]/[D_2\;+\;F_2$] at several constant total pressure, the optimum lasing conditions are found to be in a range of 1/3 to 1 and 2 to 4, respectively.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.244-249
• /
• 2015

High-altitude electromagnetic pulse (HEMP) is generated from a nuclear burst at high altitudes above the Earth, the electromagnetic fields reach the ground nearly simultaneously with regard to the operation time of systems. The aim of this analysis is to inquire about HEMP characteristics and to analyze about effect in orthogonal frequency division multiplexing (OFDM) system. Specifically, HEMP characteristics are classified field sources, spatial coverage, time domain behavior, frequency spectrum and field intensities in this study. Bits error rate (BER) of the receiver with the software simulation is confirmed for the HEMP effect. Q-factor made a difference about interference duration by transfer characteristics of system. When Q factor is smaller, the recovery time from HEMP interference is short. To the contrary, if the Q factor is larger, the recovery duration is lasted longer by 300-600%.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.349-356
• /
• 1986

For the extension of application in flash method measuring the thermophysical properties of materials, the heat diffusion equation with the heat transfer loss from front, rear, and circumferential surfaces of two layer cylinderical sample is mathematically analyzed by means of Green's function for axially symmetric pulse heating on the front of samples. The solutions are applied to determine the unknown thermal diffusivity of the two materials and analyzed the measurement error due to heat loss and finite pulse time effects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.224-231
• /
• 2003

In this paper we proposed system parameter values of ultra-wideband Impulse Radio systems for the frequency band(3.1~10.6GHz), which is allocated by Federal Communications Commission(FCC). We also analyzed performance of the proposed system in the multiple access interference environment. According to result, application of possible pulse duration($t_{n}$) is very limited by 0.04~0.0326 ns in permission frequency range that establish in FCC. In the case of the same pulse signal power, we could know that system performance was changed by pulse repetition number($N_{s}$ ) regardless of pulse duration. Thus, We could know that we have to need duration of monocycle pulse and setting of frame un it time(Τ$_{f}$ ) according to multi user numbers and design proper pulse repetition number by transfer rate in multiple access systems design. In the IR system that needs high speed transmission more than 50 Mbps in multiple access interference environment, we could know that very serious performance decrease by multiple access interference happens. Therefore, as the design of high speed multiple access IR system, it should be designed to additional improvement techniques that can remove multiple access interference at the same time.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.163-170
• /
• 2017

MLAT which is an independent cooperative surveillance system is applied to increase the positon resoultin of secondary survelliance radar. MLAT uses the hyperboic or hyperboloid position mesurement algorithm. Central processing unit of MLAT calculates target position using time difference of arrival (TDOA) which can be solved from time of arrival (TOA) information of each receivers (at least 4 receivers). To increase position resolution of MLAT which use TDOA, TOA which is transfer time from tranmitter to receiver shold be calculated with precision time resolution in receiver. This paper explained the MLAT system briefly and explained ATD which is one of means of calcuating pulse position. ATD is applied to solve the deviation of pulse position due to different amplitude of signals in mulitiple receivers. In this paper, to analysis the performance of ATD, the simulation result of LAS and CDS was compared with the simulation result of basic threshold method.

• Korean Journal of Animal Reproduction
• /
• v.20 no.4
• /
• pp.459-465
• /
• 1997

The present study was undertaken to determine the effect of NT time on the rate of fusion a and suhseguent development In vitro and determine the optimal strength and duration of DC pulse for electrofusion of IVF donor embryo nuclei and IVM recipient oocytes. The recipient oocytes were enucleated 25 ~ 2Sh after IVM and further cultured for 18 ~ 20h prior to fusion for oocyte aging. IVF embryos as donor nuclei were C co cultured with BOEC for 16- to 32-cell stage development. The transfer time of donor bIas tomeres was 1~3h post-enucleation in early NT group and 1 ~ 18h post-enucleation in late NT group, respectively and fusion was performed 43~4Sh post-IVM. The fusion rate did not differ between the early NT and late NT group, but the rate of cleavage and 8- to 16-cell stage embryos in the late NT group was more higher than that in the early NT group. The fusion, cleavage and M+B development was high from O.7SkV /cm DC than from 1.0kV /cm DC voltage, resulting in 17.6% M+B from 0.75kV /cm DC voltage. No difference in fusion rate was among pulse durations, but 50 and 70 usec pulse duration showed slight high cleavage and M + B d development. The results indicate that the best NT time of IVF donor blastomeres into the enucleated oocytes was 42~44 post-IVM and the most suitable condition for electrofusion was a single 0.7SkV /cm DC voltage for SO~70$\mu$sec.