• 한국추진공학회지
• /
• 제26권1호
• /
• pp.98-106
• /
• 2022

고고도에서 작동하는 신뢰성 있는 이중펄스 추진기관을 개발하기 위해서는 안정적인 진공 점화 기술과 펄스분리장치(PSD, Pulse Separation Device) 설계기술이 요구된다. 본 연구에서는 이중펄스 추진기관 격막형 펄스분리장치(Membrane Type Pulse Separation Device)의 파열압력 분석기법을 개발하였다. 변형률-압력 관계를 이용하여 PSD 파열압력에 대한 관계식을 도출하였다. 고고도 진공환경을 모사할 수 있는 PSD 진공파열 시험장치와 PSD 1초급 진공점화 시험장치를 개발하였다. PSD 진공파열시험을 수행하여 파열압력을 분석하고 PSD 설계 값을 도출하였다. 최종적으로 PSD 1초급 진공점화 시험을 통해 이중펄스 추진기관의 PSD 설계 파열압력과 추진제 진공점화 성능을 확인하였다.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.8-15
• /
• 2013

Wide range frequency pulses occur in a car crash test. Until now, low frequency under 400Hz has been used to determine an airbag deployment criteria. Also, FIS (Front Impact Sensor) has been used to detect the crash pulse in early stage. Nowadays, technology to determine an airbag delpoyment criteria by using a high frequency crash pulse without FIS is being focused on. In this paper, the signal transmissibility of high frequency pulse for two different cars was studied. Also, signal transfer test of high frequency pulse was done by using a high speed ball impact. Signal runtime of the frontal impact is compared with that of the side impact. The signal transmissibility difference due to the car structure difference was discussed and structure change for improving the signal transmissibility was proposed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.666-669
• /
• 2011

이중펄스 로켓모타에 적용되는 격벽형 펄스분리장치의 파열판 형상을 변경하는 설계를 진행하였다. 펄스분리장치 설계 확정에 앞서 3가지 다른 형상의 파열판 평판시험을 진행하여 파열판 성능을 확인하였다. 평판시험후 시험결과를 분석하여 펄스분리장치 파열판의 8개의 원형 구멍형과 8개의 사다리꼴 구멍 형상을 적용하기로 결정하였다.

• 동의생리병리학회지
• /
• 제26권6호
• /
• pp.970-975
• /
• 2012

In Sasang constitutional medicine, doctors diagnose and treat patients according to their Sasang consitutition (SC) type. In this work, by a clinical test with a radial pulse tonometer, we investigated radial pulse properties which were significant in distinguishing unhealthy subjects from healthy subjects for each SC type. We measured radial pulse properties on left and right Gwan locations with a pulse tonometer for 299 elderly female subjects of age of 50 years old or above. We used a newly developed SCAT system to determine subjects' SC types. Subjects' health levels of either healthy or unhealthy were determined independently by two Korean medical doctors. To investigate the statistical differences, we used either of Student's t-test or Mann-Whitney U test depending on the normality of distribution of test statistic. For TE type, unhealthy subjects were characterized with significant increases in heart rate, systolic to diastolic period, pulse depth, while they showed significant decreases in width of pulse in normal direction, pulse area in diastolic period, and high harmonic components (6th, 7th) of power spectral density. For SE type, unhealthy subjects were characterized with significant increases in pulse pressure and pulse depth, while no significant differences were found for SY type. We investigated the characteristic differences in radial pulse properties due to change in health levels on each SC type for elderly females. Pulse variables which were significantly different between healthy subjects and unhealthy subjects were found to vary between SC types. For TE type subjects, many variables were found significant at the left Gwan location, which is in support of the theory of hyperactive liver functioning for TE type. Irrespective of the constitution, the related changes in the pulse properties due to worsened health level were in support of elevated blood flow amount in compensation with weakened blood circulatory function.

• 콘크리트학회논문집
• /
• 제16권6호
• /
• pp.833-840
• /
• 2004

비파괴 검사에 의한 콘크리트 압축강도 시험법 중에서 반발도법과 초음파 속도법은 가장 널리 사용되는 방법이다. 그러나 국내에서 사용되고 있는 비파괴 강도 시험법은 대부분이 외국의 시험법을 적용하고 있어서 국내의 콘크리트 구조물에 직접 적용하는 데는 무리가 따른다고 할 수 있다. 반발도법의 경우, 일본건축학회 등의 제안에 자라 20개의 타격점을 표준으로 채택하고 있으나 표준편차에 대한 고려를 하지 않고 있는 실정이다. 또한, 초음파 속도법에 의한 시험은 압축강도를 추정하는데 필요한 측정횟수의 규정이 없다 따라서 본 연구에서는 카이검증을 이용하여 비파괴 검사법에 의한 콘크리트 압축강도의 타격횟수의 신뢰도를 검토하고 최소시험 횟수를 제안하였다. 그 결과, 반발도법과 초음파 속도법으로 추정한 콘크리트 압축강도 값이 만족할 만한 신뢰범위에 들기 위한 최소시험횟수는 각각 11회와 7회로 분석되었다. 다만, 실구조물의 품질변동을 고려하여 이상치의 결측처리와 시험군의 격자 배열을 전제로 한다면, 반발도법은 국내의 관행에 따라 20회로, 음파 속도법은 9회로 규정하는 것이 바람직하다고 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권6호
• /
• pp.173-179
• /
• 2008

비파괴시험에 의한 콘크리트 압축강도 추정시 반발경도법은 콘크리트 타설 후 시간경과에 따라 재령계수를 적용하고 있으나 초음파속도법은 적용되지 않고 있다. 재령경과에 따른 콘크리트 초음파속도의 변화에 대한 재령계수 적용의 필요성에 대하여 검토해야함에도 불구하고 그에 대한 연구가 거의 없는 실정이다. 따라서 본 연구는 콘크리트 초음파속도를 측정하여 강도 추정식에 적용될 재령계수를 산정하기 위한 실험을 실시한 결과, 초음파속도는 콘크리트 경화에 따라 재령 초기 기준치에 비교하면 급격한 변화를 보여 재령계수를 반드시 적용해야 한다는 것을 알 수 있었으며 실험결과에 의해 콘크리트 초음파속도의 재령계수를 제안하였다.

• 동의생리병리학회지
• /
• 제24권6호
• /
• pp.1077-1081
• /
• 2010

In this work, we report the diagnostic relations among some primary pulse conditions such as the floating/sunken, deficient/forceful, large/fine, and the long/short pulses. For this purpose, we carried out a clinical test, in which 11 Oriental medical doctors had participated to diagnose the pulses for 1566 healthy subjects. The subjects were divided into 11 subgroups and each subgroup was allocated to an individual doctor. It resulted in that, for 847 subjects (54%), two or more than two pulse conditions were felt simultaneously, for which we counted the frequency of the pairs of the pulse conditions. For the statistical analysis, we used a Chi-square test. As a result, at high frequency, the forceful, large, and the long pulses were diagnosed in pairs or in their triplet, and a similar close relation was found between the deficient, fine, and the short pulses. The pairwise diagnoses of the pulse conditions between the forceful, large, and the long pulses, and between the deficient, fine, and the short pulses imply their close relatedness in clinics. This result is supported by the theory of deficiency/excess syndromes. Moreover, we show that the close relatedness among the pulse conditions can be understood in terms of the geometric features of the radial artery near the prominent bone. This is the first work which reports the relatedness between the primary pulses by an objective clinical test.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.153-153
• /
• 2011

Ni $TiO_2$ nano composite coatings were fabricated by using pulse current electrodeposition technique at 100 Hz pulse frequency with a constant 50% pulse duty cycles and reference was taken with respect to the direct current electrodeposition. The properties of the composite coatings were investigated by using SEM, XRD, Wear test and Vicker's microhardness test. XRD patterns of pulse deposited composite coatings were found to be changed from preferred (100) orientation to the random mixed orientations. The results demonstrated that the Vickers microhardness of composite coatings under pulse condition was significantly improved than that of pure nickel coating as well as direct current electrodeposited Ni-$TiO_2$ composite coatings. Wear tracks have shown the less plastic deformation at pulse condition with reduced coefficient of friction. Nickel matrix grain size was also found to be lower in pulse plated composite coatings as compared to direct current electrodeposited composite coatings.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.848-854
• /
• 1999

In this paper, we designed and implemented a precise pulse motor controller chip that generates the pulse needed to control step motor, DC servo and AC servo motors. This chip generates maximum pulse output rate of 5Mpps and has the quasi-S driving capability and speed and moving distance override capability during driving. We designed this chip with VHDL and executed a logic simulation and synthesis using Synopsys tool. The pre-layout simulation and post-layout simulation was executed by Compass tool. This chip was produced with 100 pins, PQFP package by 0.8${\mu}{\textrm}{m}$ gate array process and implemented by completely digital logic. We developed the test hardware board of performance and the CAMC(Computer Aided Motor Controller) Agent softwate to test the performance of the pulse motor controller chip produced. CAMC Agent enables user to set parameters needed to control motor with easy GUI(Graphic User Interface) environment and to display the output response of motor graphically.

• 한국농공학회지
• /
• 제43권4호
• /
• pp.97-105
• /
• 2001

The ultrasonic pulse velocity test has a strong potential to be developed into a very useful and relatively inexpensive in-place test for assuring the quality of concrete placed in structure. The main problem in realizing this potential is that the relationship between compressive strength ad ultrasonic pulse velocity is uncertain and concrete is an inherently variable material. The objective of this study is to improve the reliability of in-place concrete strength predictions by ultrasonic pulse velocity method. Experimental cement content, s/a rate, and curing condition of concrete. Accuracy of the prediction expressed in empirical formula are examined by multiple regression analysis and linear regression analysis and practical equation for estimation the concrete strength are proposed. Multiple regression model uses water-cement ratio cement content s/a rate, and pulse velocity as dependent variables and the compressive strength as an independent variable. Also linear regression model is used to only pulse velocity as dependent variables. Comparing the results of the analysis the proposed equation expressed highest reliability than other previous proposed equations.