• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.63-69
• /
• 2012

Recently, the cement industries brought very severe environment problems such as resource depletion and global warming with massive carbon dioxide during its production. The number of cases using industrial by-products such as the ground granulated blast furnace slag (GGBFS) in concrete mixtures is increasing to resolve the environmental issue. GGBFS is mainly used in the range between 20 to 50% to replace cement, but nowadays lots of researches are carried out to develop the alkali-activated slag (AAS) concrete with no cement. In this study, the early age properties of alkali activated slag (AAS) mortar are investigated to obtain the fundamental data for AAS concrete application to structural members. The experimental variables were the water-binder ratios of 0.3, 0.4, and 0.5 and NaOH as the alkali activator of 4%, 8%, and 12% by the mass of GGBFS, and compressive strength, flow, setting time, and ultrasonic pulse velocity of AAS mortars were measured and analyzed. It is found from the test results that as the normal concrete the lower W/B, the higher compressive strength. However, superplasticizer has to be used for producing high strength AAS concrete because the workability of AAS mortar are significantly lowered.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.87-95
• /
• 2014

Purpose: The purpose of this study was to design a variable frequency LED light system for plant factory which combined red, blue, green, white, and UV lights and controlled the ratio of the light wavelength. In addition, this study evaluated the performance of each combination of LED to verify the applicability. Methods: Four combinations of LED (i.e. Red+Blue, Red+Blue+Green, Red+Blue+White, Red+Blue+UV) were designed using five types of LED. The system was designed to control the duty ratio of each wavelength of LED by 1% interval from 0~100%, the pulse by 1Hz interval from 1~20kHz. Response characteristics of the control system, spectral distribution of each combination, light uniformity and uniformity ratio were measured to test the performance of the system. Results: Clean waveforms were measured from 10Hz to 10kHz regardless of duty ratio. Frequency distortion was observed within 5% of inflection point at frequencies above 10kHz regardless of duty ratio, but it was judged negligible. Spectra showed a normal distribution, and maximum PPF with duty ratio of 100% was $271.4{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ for the Red+Blue combination. PPF of the Red+Blue+Green combination was $258.9{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, and that of the Red+Blue+White combination was $273.9{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. PPF of the Red+Blue+UV combination was $267.7{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Uniformity ratio for the area excepting border showed 0.90 for the Red+Blue and Red+Blue+White combinations, 0.87 for the Red+Blue+Green combination, and 0.88 for the Red+Blue+UV combination. The light was irradiated evenly at the area excepting border, so it was suitable for plant growing. Conclusions: From the results of this study, response characteristics of the control system, spectral distribution of each combination, light uniformity and uniformity ratio were suitable for applying into the plant factory.

• The Korean Journal of Pain
• /
• v.1 no.1
• /
• pp.20-27
• /
• 1988

Continuous cervical epidural anesthesia with two different concentrations of bupivacaine had been performed in 43 cases for surgery of upper extremity and cervical spine. After the initial dose of 0.33% bupivacaine 15ml to Group I(n=22) and 0.5% bupivacaine 15ml to Group II(n=21) was injected respectively, we observed the circulatory and pulmonary functions to be changed, and evaluated the duration of those analgesic action. The number of spinal segment to be affected and the complications were checked. Statistical significance of changes after the initial dose in both groups was determined by student's t-test. All values are impresed as mean$\pm$1S.D.. The results were as follows: 1) Circulatory functions; Systolic B.P. and Pulse rate were decreased by 10~15torr and 5~6 beats per minute respectively between 10~30 minutes following the initial dose, which were statistically significant in both groups. 2) Pulmonary functions; The diminution of minute volume showed to 20% and a rise of $PaCO_2$ level to 5~6 torr respectively between 30~60 minutes following the initial dose, which were statistically significant in both groups. There were no significant changes in self respiration and respiratory rate in both groups. 3) The duration of analgesic action was $72.3{\pm}25.7$(min) in Group I and $83.5{\pm}28.5$(min) in Group II which was not statistically significant between two groups, and the number of affected spinal segment at ore hour following the Anesthusia was $8.7{\pm}2.0$ in Group I and $10.5{\pm}2.4$ in Group II which was statistically significant between two groups. 4) Complications; a. Hypotension(below 80torr in systolic pressure) was appeared in 5% of all patients. b. Bradycardia(below 60 beats per minutes) was appeared in 25% of all patients. c. Inadvertent dural puncture was developed in only one patient, In conclusion, the 0.33% bupivacaine as well as 0.5% bupivacaine were enough for those analgesic effect in the above mentioned surgery even though the duration of analgesic action was about 10 minutes shorter in Group I than that of Group II. The cardiopulmonary function was clinically rather stable in Group I than that of Group II. Therefore we thought 0.33% bupivacaine was satisfactory for the clinical practicality in the cervical epidural anesthesia.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3418-3426
• /
• 2009

The purpose of this study was to investigate the feasibility of field operation protocol for cardiopulmonary resuscitation(CPR) in person with non-traumatic arrest. This study was performed from May 1 through June 27, 2008, and subjects were 150 students who are attending the department of Emergency Medical Service in J and K universities which located in Jeollabuk-do and Jeollanam-do areas. Practical conformance was verified using by nonequivalent control group pretest-posttest design. This study divided into two groups; experimental group that employed field operation protocol and control group that applied conventional CPR protocol, and comparative analyzed statistically the necessary time of the items of each protocol. The results indicated that each performance time of 18 items was reduced over 3 seconds except 5 items(assessment of consciousness, airway control, two times of artificial respiration, check of circulation, and five cycles of CPR). And time of 6 items(intubation, peripheral intravenous line, reassessment of consciousness, pupil reaction, carotid artery pulse, and vital sign) was minimized more than 60 seconds, and total performing time was shortened 110.85 seconds. The results suggested that total performing time in pre and post test where the protocol was applied for two groups showed a statistically significant decrease(t=-6.580, p=.000). Consequently, field operation protocol for cardiopulmonary resuscitation(CPR) in person with non-traumatic arrest will be a available manual which support prompt and accurate decision making, and improve emergency medical service.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.64-71
• /
• 2007

The selection of a suitable adsorbent for removing organic sulfur compounds tetrahydrothiophene (THT) and t-butylmercaptan (TBM) from natural gas has been carried out. The saturation adsorption capacity for the sulfur compounds were determined by pulse adsorption method for a group of nanoporous materials, including Na-Y, Na-ZSM-5, Na,K-ET(A)S-10, Na-Mordenite, Na,K-Clinoptitolite, Ti/MCM-41, Ti/SBA-15 and amorphous titanosilicates. Among the materials tested, Na-Y and Na,K-ET(A)S-10 zeolites showed high adsorptive capacities for THT and TBM. The saturation capacity for THT on Na,K-ETS-10 was comparable with that on Na-Y zeolite, which is well known as an effective adsorbent. The capacity and adsorptivity for THT and TBM on Na,K-ETAS-10 were improved by an increase in crystallinity of Na,K-ETAS-10. An investigation of the competitive adsorption between THT and TBM from the breakthrough test using a simulated natural gas indicates that Na,K-ETS-10 selectively adsorbs THT. The breakthrough capacity for THT on Na,K-ETS-10 was 1.19 mmol/g. The results show that the high adsorption performance of Na.K-ETS-10 and Na,K-ETAS-10 is due to the highly exchanged cations in the zeolitic structure which exhibit the strong electrostatic interactions with organic sulfur compounds and their wide pore nature.

• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.451-458
• /
• 2008

The near-fault ground motion (NFGM) is characterized by a single long period velocity pulse of large magnitude. NFGM's have been observed in recent strong earthquakes, Izmit Turkey (1999), Kobe Japan (1995), Northridge USA (1994), etc. These strong earthquakes have caused considerable damage to infrastructures because the epicenter was close to the urban area, called as NFGM. Extensive research for the near-fault ground motion (NFGM) have been carried out in strong seismic region, but limited research have been done for NFGM in low or moderate seismic regions because of very few records. The purpose of this study is to investigate and analyze the effect of near-fault ground motions on reinforced concrete (RC) bridge piers with lap-spliced longitudinal reinforcing steels. The seismic performance of four RC bridge piers under near-fault ground motions was investigated on the shake table. In addition, a RC bridge pier is subjected to pseudo-dynamic loadings. Test results showed that large residual displacements were observed in RC bridge piers under NFGM. RC specimens on the shake table failed at relatively low displacement ductility, compared with the displacement ductility of RC bridge pier subjected to pseudo-dynamic loadings.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.73-83
• /
• 2017

Used small household appliances have a wide variety of product types and component materials, and contain high percentage of black plastics. However, they are not being recycled efficiently as conventional sensors such as near-infrared ray (NIR), etc. are not able to detect black plastic by types. In the present study, an automatic sorting system was developed based on laser-induced breakdown spectroscopy (LIBS) to promote the recycling of waste plastics. The system we developed mainly consists of sample feeder, automatic position recognition system, LIBS device, separator and control unit. By applying laser pulse on the target sample, characteristic spectral data can be obtained and analyzed by using CCD detectors. The obtained data was then treated by using a classifier, which was developed based on artificial intelligent algorithm. The separation tests on waste plastics also were carried out by using a lab-scale automatic sorting system and the test results will be discussed. The classification rate of the radial basis neural network (RBFNNs) classifier developed in this study was about > 97%. The recognition rate of the black plastic by types with the automatic sorting system was more than 94.0% and the sorting efficiency was more than 80.0%. Automatic sorting system based on LIBS technology is in its infant stage and it has a high potential for utilization in and outside Korea due to its excellent economic efficiency.

• Child Health Nursing Research
• /
• v.5 no.3
• /
• pp.281-291
• /
• 1999

The purpose of this study was to compare the sleep characteristics between the prone and the supine position in healthy newborns. The 48 newborns were observed in the prone position and the supine position respectively on the 2nd day after birth. The data were collected from January to May, 1999. The state of a newborn was classified and categorized to 6 states (deep sleep. light sleep, drowsy, quiet alert, active alert, crying) by Barnard. The movements of eyes, face and extremities, pulse and arterial oxygen were observed and recorded continuously from the start of sleep after feeding until the time of being woken for the next feeding by a trained nurse The data was analyzed by using paired t-test. The results of this study were as follows; 1. There was no significant difference in the length of sleeping time between the prone and the supine position. 2. There was no significant difference in the length and frequencies of each states(deep sleep, light sleep, drowsy, quiet alert, active alert, crying) between the prone and the supine position But the frequency of light sleep in the supine position was significantly higher than that of the prone position. 3 There was no significant difference In the numbers or eyes movements between the prone and the supine sleep position. But the amount of facial and extremity movement in the supine position was significantly higher than those in the prone position 4. There was no significant difference in the arterial oxygen content between the prone and the supine sleep position. 5. There was no significant difference in the heart rates between the prone and the supine sleep position. The above results indicated that the newborns in the prone Position moved less and slept deeper than those in the supine position. though there was no difference in the length of sleep or arterial oxygen content between the prone and the supine sleep Position. But. Nurses and mothers should consider the relationship between the sleep Position and SIDS suggested by previous researches. The infant's 'awakening' during sleep is a normal process and rather valuable because it can provide an opportunity to promote a stronger relationship between mother and baby. So, It is suggested that the supine sleep position is better than the prone sleep position for infants.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2280-2288
• /
• 2014

The conventional dimming control methods of LED (Light-emitting dioades) include Analog, PWM (Pulse Width Modulation), and FM (Frequency Modulation) Control. Analog dimming is controlled by adjusting forward current of Power LED. Although Analog dimming is possible to control linearly the brightness levels on a whole range (0%~100%), it comes into existence a variation of wavelength by changing the Power LED's forward current. PWM dimming has achieved by varying in duty of full current flowing to the Power LED. Generally, PWM dimming doesn't make variation of wavelength but have difficulty with adjusting the linear brightness level between 0% and 10%. FM dimming method is on the same wavelength as PWM dimming, however, it has problem of flickering at low level of dimming. This paper propose a efficient dimming control method of Power LED in order to overcome the disadvantages of the above mentioned methods. We apply to Analog method in low level of dimming control and use PWM method in dimming range from 10% to 100%. For the experiment, we design and implement a circuit and test the proposed method. Consequently, we can control the linear brightness of Power LED across the whole range and get the constant wave at different dimming level. The experimental results show the benefits of the proposed method.

• The Korean Journal of Physiology
• /
• v.2 no.2
• /
• pp.11-20
• /
• 1968

Maximal oxygen uptake was measured in thirty-three secondary school girls by means of the treadmill test. Eighteen middle school girls aged 14.0 (range: $13.0{\sim}15.9$) years and fifteen high school girls aged 16.9 (range: $16.0{\sim}18.0$) years served as subjects. Maximal treadmill run lasted for 2 minutes and 20 seconds and the expired air was collected in a Douglas bag through a J-valve during the last one minute period. In general, absolute values of various measurements in the high school girls were greater than those of the middle school girls. When values were expressed on the body weight or lean body weight basis, however, work capacity of middle school girls was superior to that of the high school girls. The detailed results are as follows: 1. In middle school girls maximal oxygen uptake was 1.78 l/min., 47.4 ml/kg body weight, 12.3 ml/cm body height, and 61.7ml/kg lean body mass. In high school girls maximal oxygen uptake was 1.93 l/min., 39.7ml/kg body weight, 12.3 ml/cm body height, and 51.2 ml/kg LBM. Although the absolute value of maximal oxygen uptake was greater in high school girls than in middle school girls, values expressed on the body weight basis showed the reverse trend, namely, values of the middle school girls was greater than those of the high school girls. 2. The ratio of maximal to resting oxygen uptake was 8.8 in the middle school girls and was 10.2 in the high school girls. 3. Maximal pulmonary ventilation in the middle school girls was 55.3 l/min. and 66.1 l/min. in the high school girls. The ratio of maximal to resting pulmonary ventilation was 10.2 in the middle school girls and 10.1 in the high school girls. 4. The correlation between body weight and maximal oxygen uptake was relatively high, namely, r=0.79 both in middle and high school girls. The correlation coefficient between body weight and maximal pulmonary ventilation was a little less that of between maximal oxygen uptake and showed a value of r=0.60 both in middle and high school girls. The lean body mass was a poor reference of maximal oxygen uptake or maximal pulmonary ventilation as compared to body weight. The correlation between maximal oxygen uptake and maximal pulmonary ventilation was high and the coefficient of correlation in middle school girls was 0.927 and in high school girls it was 0.856. 5. Maximal ventilation equivalent was 30.9 liters in middle school girls and 33.9 liters in high school girls. This indicated that no hyperventilation was induced during the maximal of oxygen uptake exercise period as related to the maximal oxygen uptake. 6. Heart rate reached to the peak value within 1.5 minutes after beginning of maximal oxygen uptake run and remained at the same peak plateau level throughout the entire running period. Heart rate decreased steeply on cessation of running and subsided slowly thereafter. The maximal heart rate was 184 beat/min. in middle school girls and 189 beat/min. in high school girls. 7. Maximal oxygen pulse was 9.4 in middle school girls and 9.9 ml/beat in high school girls.