• 펄프종이기술
• /
• 제33권4호
• /
• pp.15-20
• /
• 2001

The function of the moisture-proof paper is to prevent moisture from adsorbing into the packed goods. Water-vapor transmission rate of the moisture-proof paper should be less than 100g/$m^2$.24hr and the optimum rate would be less than 50g/$m^2$.24hr. In general the moisture-proof paper has been made by laminating polyethylene or polypropylene on top of the base paper. However this kind of moisture-proof paper has a problem in recycling so that it brings about environmental pollution. In general the moisture-proof paper has been made by laminating polyethylene or polypropylene on top of the base paper. However this kind of moisture-proof paper has a problem in recycling so that it brings about environmental pollution. The purpose of this paper was to make moisture-proof paper using the mixture of SB latex and wax emulsion which was recyclable and environmentally friendly. Water vapor transmission rate showed less than 50g/$m^2$.24hr in mixture ratio of 85:15, 87:13, 90:10. Especially the mixture ratio of 87:13 showed the most favorable water-vapor transmission rate. However, the moisture-proof layer was destroyed slightly by folding in packing. It has been observed that there was no close relationship between water-vapor transmission rate of the moisture-proof paper and grammage of the base paper, but the density of base paper had influenced on water vapor transmission rate. It was also observed that the moisture-proof paper could be recycled. The moisture-proof paper was similar to base paper in degree of the pulping, and there was no significant difference in dispersion between moisture-proof paper and base paper. Most of wax particles which caused the spots during drying process could be removed by flotation process. Tensile strength and tear strength of both moisture-proof paper and base paper after pulping were measured to examine the fiber bonding, and no significant difference in physical properties was observed.

• KSBB Journal
• /
• 제13권5호
• /
• pp.593-598
• /
• 1998

Biological deinking process of used papers was studied by the polymer modified cellulase. Cellulase was modified with copolymers which consist of polyoxyethylene derivative and maleic anhydride(MA). The MA functional groups of copolymer can react with amino acids groups of the cellulase without much loss of activity. Modified degree of amino acids was controlled by the added copolymer. The maximum modified degree was about 60% and it was obtained when the weight ratio of copolymer and cellulase was 4. The remained activity of the maximum modified cellulase(MMC) was higher than 80% of native cellulase. The MMC's concentration was 0.05-2.0 wt% relative to the dry paper. In mechanical pulping process, cellulase enhanced the detachment of the ink particle from the used paper by partial hydrolysis of the fiber. The polyoxyethylene of modified cellulase produced the forms which can float the separated ink particle. Compared to the convention deinking method with NaOH or organic chemicals, the new biological deinnking process improved the physical properties such as freeness, tearing strength and whiteness.

• Journal of Forest and Environmental Science
• /
• 제9권1호
• /
• pp.67-80
• /
• 1993

무공해 대체 펄프화법 개발의 일환으로 비교척 최근에 많은 연구가 이루어지고 있는 아세트산-물 용매 증해법을 이용하여 현사시나무와 소나무률 펄프화 하였다. 펄프 특성의 변화에서 현사시나무는 거의 모든 아세트산 충해초건에서 우수한 펄프화 경향을 보였지만 소나무는 저온에서 충해가 거의 일어나지 않았다. 현사시나무의 최적 중해조건은 중해농도 95%, 중해온도 $185^{\circ}C$, 증해시간 0.5hr이었다. 구성당 성분의 거동은 현사시나무와 소나무에서 glucose만이 소량 감소하는 반면 그외의 당성분들은 다량 용출되었다. 폐액중의 용출 아세트산 리그닌에 대한 기초척인 성질을 살펴본 결과 현사시나무의 아세트산 리그닌의 원소조성은 C가 63.88%, H가 5.45%, O가 30.67%이며 $C_9$의 formular는 $C_9H_{9.15}O_{3.24}$였고 소나무의 아세트산 리그닌의 조성온 C가 61.85%, H가 6.14%, O가 32.01% 이며 $C_9$의 formular는 $C_9H_{9.15}O_{3.50}$이었으며 두 수종의 아세트산 리그닌 중합 명균분자량은 현사시나무가 731이며 소나무는 725였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.115-119
• /
• 1999

During mechanical pulp production and blcaching wood components, such as extractives, carbohydrates and lignin are dissolved and dispersed into the process waters. These components are called dissolved and colloidal substances(DCS). DCS can accumulate during water circulation and can in turn affect paper machine runnability and also the strength and optical properties of the paper. In this work DCS fraction origination from TMP process were treated with enzymes acting on triglycerides. glucomannans, and lignin and the effect of enzymatic treatments on the water composition as well as sheet properies were evaluated. Lipases were found to modify the chemical structure of the extractives resulting in more hydrophilic fibre surface and subsequent improvement in the sheet strength properties. Mannanase treatment, on the other hand, destabilized pitch. As a result, aggregation of pitch to the fibres was observed which in turn resulted in impaired strength properties. Laccase could effectively polymerize lignans and the reaction products seemed to be sorbed onto the fibres.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.153-159
• /
• 2006

Red algae were used to make bleached pulp, from which paper handsheet samples were made. Red algae consists of rhizoidal filaments, epidermal tissues whose color were reddish, mucous carbohydrates, and other minor elements. Rhizoidal filaments of high brightness were obtained after extracting out mucous carbohydrates, and bleaching the remainder by using bleaching chemicals. The sizes and shapes of several rhizoidal filaments (or red algae pulp) from different red algae species were examined, and their handsheet properties were compared. Transparent and transluscent high density paper samples were made without applying refining process from the red algae pulp. White paper samples with good printability and excellent formation were made. We are developing pilot scale pulping and papermaking facilities at this time.

• 펄프종이기술
• /
• 제36권3호
• /
• pp.52-59
• /
• 2004

The greater Increase of the demand for environmental friendly materials especially for packaging industry leads to the larger interest in the reusable and recycable materials such as pulp mold. Although the pulp mold has great characteristics for packaging, some deficiency compared with other packaging material like EPS(Expandable Polystyrene) need to be overcome, for example, the relative higher cost. In this report, since the water drainage rate at the forming zone of a wet pulp mold process could have a great influence on the economical efficiency not only by increasing machine speed but also reducing the drying energy, the optimum ways for increasing drainage were investigated The mechanism of vacuum drainage In pulp mold forming was successfully evaluated by using RDA(Retention and Darinage Analyzer). Since the conditions of stock were greatly affected by the pulping time of low consistency pulper, the optimum pupling time was investigated with considerations of all stock preparation processes. The change of stock temperature and the addition of polyelectrolyte could improve the vacuum drainage rate. It was founded that the wire mesh types of mold former had a little influence on the retention because of the relatively mild vacuum drainage. However, the bigger size of dewatering hole showed better drainage rate and could reduce the plugging and con lamination of mold.

• 펄프종이기술
• /
• 제36권5호
• /
• pp.69-77
• /
• 2004

Degradations of pine, yellow poplar and sweet gum by two fungi, Pycnoporus cinnabarinus and Trichophyton rubrum LSK-27 were investigated. P. cinabarinus degraded pine block samples much faster than T rub rum LSK-27, whereas P. cinnabarinus and T rubrum LSK-27 degraded yellow poplar and sweet gum at almost the same rate. In an effort to get a better understanding of how fungi degrade lignin in wood, contents of various functional groups were analyzed. After three-months of degradation of pine flour by these fungi, the following changes were observed: an increase in condensed phenolic OH group and carboxylic acid group content, a decrease in the guaiacyl phenolic OH content, and little change of aliphatic OH group content. Further studies in the degradation of pine flour by P. cinnabarinus indicated that the increase in condensed phenolic OH group content and the decrease in guaiacyl phenolic OH group content occurred in the first month of the degradation. The changes of functional group contents in the degradation of unbleached softwood kraft pulp by P. cinnabarinus had the same trends as those in the degradation of pine flour. That is, structural alteration of lignin due to the kraft pulping process had little effect on how P. cinnabarinus degraded lignin.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.84-92
• /
• 1999

Excellence of the Korean traditional paper(Hanji) can be proved by literatures and legacies handed down from generations. However, with the problems pertaining to a majority of traditional manufactures, Hanji industry was declined because of low productivity, insufficient supply of raw material , and reduced demand. therefore, modernizxation of the Hanji technology and development of new uses are very important. This study was carried to investigated the papermaking characteristics of Morus spp.(M.alba, M.Bombycis, and M.Ihou) for new Hanji, modernize manufacturing process of Hanji by grafting on developed modern pulping and papermaking technology, develop the various uses, and establish the foundation for development of high value-added products. Hanji is made from M.Ihou, while stalk , and sulfomethylated pulp gave better sheet formation and higher brightness than those of the others. Physical properties of Hanji which made from bast fiber pulps were better than those of whole stalk pulps. Hanji which made from M.bombycis bast fiber and whole stalk pulps were not so good sheet strength as other species. Sulfomethylated whole stalk pulps were shown better sheet strength than alkali and alkali-hydrogen peroxide whole stalk pulps.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.19-24
• /
• 1994

This study was performed to study utilization of separated carbohydrates as well as separation, following analysis of the major components and separation of the carbohydrates in waste liquors of SP, KP, ASAM and AS. The result can be summerized as follows; Inorganic contents in waste liquors increase in this order AS

• 방사선산업학회지
• /
• 제5권3호
• /
• pp.227-230
• /
• 2011

Pulps were separated from wood chips using an Electron beam irradiation (EBI) treatment without a NaOH-AQ (anthraquinone) treatment for cooking. The methods were based on a hot water treatment after EBI and two-step bleaching processes. Chemical compositions and FT-IR spectroscopy demonstrated that the content of lignin and hemicellulose in the bleached wood pulps treated with various EBI dose decreased with an increase of EBI doses. Specifically, the lignin in the bleached with pulps treated at 600 kGy of EBI dose was almost completely removed. Moreover, TGA analysis showed that a thermal stability increased with increasing the content of cellulose but the lignin decomposed slowly over the wide region.