• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.144-150
• /
• 2002

본 실험은 산림자원의 감소 예방과 지구의 환경보존을 위해서 생장이 빠르고 펄프원자재로 활용할 수 있는 비목재 섬유작물을 도입하는 것을 목적으로 하고 있다. 또한 부족한 한지의 원료인 닥나무를 수입하고 있는 실정에서, 국내에서 자생하고 있는 비목재섬유로 한지를 제조함으로써 수입대체 및 원가절감 등 일석이조의 효과를 거둘 수 있다. 이에 불량한 환경조건에서도 생육이 왕성한 어저귀(Abutilon avicennae G.)를 재배하여 그간의 진보된 펄프 제조기술을 적용하여 새로운 제지용 원료로 개발함으로써 부족한 원자재는 물론이거니와 국내 부존자원 이용의 극대화를 꾀하고자 실시하였다. 또한 폐기처리되는 농산물의 이용극대화를 꾀하기 위해 전목펄프화를 실시하였다. 그 결과 어저귀는 생장속도가 빠르고 수확기가 짧으며 집약적 재배 및 관리가 가능하여 단위면적당 최대의 수확량을 올릴 수 있었다. 어저귀 인피부의 섬유장은 2.4 mm로써 목재섬유 중 소나무와, 비목재섬유 중 케나프와 매우 유사한 결과를 보여주었고, 화학성분의 분석결과 어저귀 섬유는 추출성분의 함량이 높고 리그닌이 적은 것이 특징적으로 나타났다. 펄프화와 관련하여 인피부는 150℃에서 48~57%, 전간부는 170℃에서 43~51%의 높은 수율을 나타냈고, 설포메틸 펄프화법의 수율이 더 높게 나타났다. 펄프의 탈리그닌율도 두가지 펄프화법이 모두 90% 이상의 높은 탈리그닌율을 나타내었다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제45차 학술발표회
• /
• pp.43-43
• /
• 2011

현대인들은 생활환경에서 발생하는 각종 미세먼지 등의 입자상 오염물질 뿐만 아니라 각종 VOCs 등의 가스상 오염물질과 곰팡이, 박테리아, 바이러스 등 생물학적 오염물질까지 생활공간 내의 공기환경은 점점 악화 되고 있으며 공기 정화 등의 필요성이 증대 되고 있다. 이에 본 연구에서는 닥 펄프와 활성탄이 주성분인 Sheet를 Corrugation 장치를 통해 편파형(골판지)으로 제작하고, 다시 다층 구조로 적층된 골판지 sheet을 제작한 후 이를 두께 방향으로 일정 폭(20mm이하)으로 절단하여 필터부품의 소자로 이용하는 활성탄 필터의 제조 및 그 특성을 확인하고자 하였다. 닥펄프/펄프와 무기물의 혼합비, 해리시간 등의 변화를 주어 샘플을 만들었고, 강도, 평활성, 생산성 향상을 위해 첨가보조제 선정을 하였다. 이렇게 제조된 필터의 물리적 특성을 알아보고자 인장시험을 실시하였고, 주사전자현미경을 통하여 필터의 평활성과 표면을 관찰하였고 흡착성능 및 기능성을 VOCs 방출량, 탈취율, 항균도, 곰팡이 저항성 등의 실험을 통하여 알아보았다.

• 한국의류학회지
• /
• 제32권9호
• /
• pp.1366-1375
• /
• 2008

This studies were carried out in order to develope environmentally-friendly fiber materials and substitute resources of Paper mulberry. Various plant fibers such as New Zealand flax, Indian mallow, Kuzu vine and Yucca were used as raw materials of hand-made papers. We rotted these 4 kinds of plant fibers and removed non-cellulose. After rotting, the pulping rate(%) and the length of fibers in pulps were measured. The physical characteristics of papers made of various plants fiber were investigated and the probabilities of practical use were considered. The results were as follow: The non-cellulose contents of plant fibers were $30{\sim}40%$ and those contents must be lower down to 8% to be able to manufacture the hand made papers. The lignin in pulps were removed almost and the hemicellulose were partially removed to reach up to appropriate level of the pulp rates and fiber lengths. The more hemicellulose removed, the finer fiber thickness were and rapidly the lower Hanji tensile strength were. But the tear strength of these plants of hand-made papers do not decreased so much as tensile strength. So the property of 4 types of plant fibers might be of great advantages to make hand-made papers. Both tensile and tear strengths of Hanji of New Zealand flax, Indian mallow, Kuzu vine and Yucca were higher than Paper mulberry hand-made paper. When 30% of mulberry paper were mixed, the mixing effect showed maximum. Because of the functions of all plant fiber hand-made papers showed better than those of Paper mulberry hand-made paper, 4 types of plant fibers could be substitute Paper mulberry.

• 대한소아치과학회지
• /
• 제26권1호
• /
• pp.96-102
• /
• 1999

외상으로 인해 치근 완성 여부가 불분명 한 완전 탈구된 치아를 재식한 후 18개월 여간 관찰하여 다음과 같은 결과를 얻었다. 1. 재식 초기의 염증성 치근 흡수는 수산화 칼슘을 사용한 근관치료로 억제될 수 있었다. 2. 치근 완성 여부가 불확실한 치아에서 조기 근관치료가 염증성 치근 흡수 및 유착의 방지에 더 큰 임상적 성공을 얻을 수 있었다. 따라서, 재식 당시 치근첨의 개방성 여부가 명확하지 않을 때에는 성인의 치료 지침에 따라 치료하는 것이 보다 효과적이며, 불가피 할 경우에는 환자 및 보호자의 철저한 교육에 뒤따른 정확한 내원 약속이 속발증을 최소화 할 수 있을 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제47권1호
• /
• pp.4.1-4.13
• /
• 2022

Objectives: This study evaluated the effects of different smear layer preparations on the dentin permeability and microtensile bond strength (µTBS) of 2 self-etching adhesives (Clearfil SE Bond [CSE] and Clearfil Tri-S Bond Universal [CTS]) under dynamic pulpal pressure. Materials and Methods: Human third molars were cut into crown segments. The dentin surfaces were prepared using 4 armamentaria: 600-grit SiC paper, coarse diamond burs, superfine diamond burs, and carbide burs. The pulp chamber of each crown segment was connected to a dynamic intra-pulpal pressure simulation apparatus, and the permeability test was done under a pressure of 15 cmH₂O. The relative permeability (%P) was evaluated on the smear layer-covered and bonded dentin surfaces. The teeth were bonded to either of the adhesives under pulpal pressure simulation, and cut into sticks after 24 hours water storage for the µTBS test. The resin-dentin interface and nanoleakage observations were performed using a scanning electron microscope. Statistical comparisons were done using analysis of variance and post hoc tests. Results: Only the method of surface preparation had a significant effect on permeability (p < 0.05). The smear layers created by the carbide and superfine diamond burs yielded the lowest permeability. CSE demonstrated a higher µTBS, with these values in the superfine diamond and carbide bur groups being the highest. Microscopic evaluation of the resin-dentin interface revealed nanoleakage in the coarse diamond bur and SiC paper groups for both adhesives. Conclusions: Superfine diamond and carbide burs can be recommended for dentin preparation with the use of 2-step CSE.

• 한국가스학회지
• /
• 제15권2호
• /
• pp.82-87
• /
• 2011

열매체유는 화학공장의 가열시스템, 열교환 시스템, 가스플랜트 공정, 사출성형 시스템 및 펄프제지 공정 등에 사용된다. 열매체유는 고열이나 산화분해에 아주 안정하고 저항성이 있으며, 누출이나 방출의 경우 점화원을 만나면 쉽게 발화한다. 본 논문은 열메체유의 신유와 사용유에 대해 인화성과 열적 안정성을 고찰하였다. 열매체유의 인화성은 인화점과 자연발화점을 측정하여 평가하였고, 열적안정성은 열안정성시험기와 시차주사열량기를 사용하여 평가하였다. 실험결과로부터 열매체유의 적절한 사용과 취급과 관련된 안전대책 수립을 위해 화재 위험 특성을 제시하였다.

• Restorative Dentistry and Endodontics
• /
• 제27권6호
• /
• pp.622-631
• /
• 2002

To understand the recent characteristics of the papers published in the Journal of Korean Academy of Conservative Dentistry(JKACD), All the papers in the JKACD of 1992 to 2001 were analyzed. A total of 513 papers were classified according to its type, fold and subject of the study, school and the number of authors, references, and written language. The results were as follows ; 1 According to the type of the paper, 506(98.6%) were original articles, 3(0.6%) were review articles, and 4(0.8%) were case reports. 2. Anual proportion of papers in the fold of operative dentistry was similar to that of endodontics 3. In the field of operative dentistry, esthetic restorative materials and bonding to tooth constituted major subjects of the studies. In the field of endodotics, pulp biology was prominent and canal shaping, endodontic microbiology and canal obturation were steadily reported. 4. According to author's school, similar number of papers were published in the field of operative den tistry and endodontics in general. However, some schools showed preponderances. 5. Most studies were done by two or more authors. Studies published by two authors were most 6. Fifty(9.7%) papers were done in collaboration with workers of the other field. 7. Average number of references cited in the papers was 41.2, including domestic references of 1.8. 40.7% of the papers was shown to cite no domestic papers at all. 8. Twenty-eight(5.5%) papers were written in English, with increasing ratio.

• 기술사
• /
• 제18권3호
• /
• pp.28-35
• /
• 1985

As the paper industry consumes much water in process and discharge wastewater containing suspended solid and COD(chemical oxygen demand), relevant law against this discharge has been set up to limit the total containment of COD in discharge. This study has been carried out to improve the treatment method for the soluble COD in wastewater produced during the process of paste-board production, which is made of semichemical pulp and waste paper. Applicated methods are, O$_2$AS : O$_2$ activated sludge process DAS : Deep well activated sludge process SAS : standard activated sludge process and proper combination of DAS and SAS 1) As a result of this experiment, we get the following conclusion between in COD sludge loading "X" and COD removable rate in the process of treating waste-water. COD removable rate(％)=(0.778+0.0146/X)${\times}$100(％)……(7) 2) In case that the COD sludge loading is high, it has been cleared out that the COD removable rate shall become low due to unknown unsoluble substances contained in the process. Meanwhile, to increase the efficiency rate of treatment, it is thought to be necessary, to provide long-time contacts with activated sludge. 3) Once the COD of original waste-water and the target COD of treated water are decided, COD sludge loading is obtained from equation(7), and capacity of aeration tank in the effective systems such as O$_2$AS, DAS, to bet the required COD removable rate can be decided. Therefore the choice among SAS, O$_2$AS, DAS methods is made in consideration of required COD removable rate and allowable installation area. 4) In the sedimentation tank with sludge bulking, it is possible to increase the COD removable rate by 3～7％ but still there exist many obstacles to manage this operation.

• Restorative Dentistry and Endodontics
• /
• 제27권1호
• /
• pp.54-65
• /
• 2002

Black-pigmented bacteria have been implicated in the endodontic infections. This group of microorganisms includes Porphyromonas endodontalis, Porphyromonas gingivalis, Prevotella intermedia, and Prevotella nigrescens. The organisms display a wide variety of virulence factors that may be pertinent to acute endodontic infections. The aim of this study was to identify P. endodontalis, P. gingivalis, P. intermedia, and P. nigrescens by using special potency disk test, filter paper spot test, 165 rRNA gene-directed PCR, and API 32A. Microbial samples were collected from root canals of 33 intact teeth with necrotic pulp and/or apical periodontitis. Conventional laboratory methods were used for identification of the strains of black pigmented bacteria. Eighteen of 33 samples were positive for the growth of black-pigmented bacteria Five colonies were cultured from each pure cultured colonies from Brucella agar plate. Seventy seven colonies were positive for the growth of black-pigmented bacteria. Thirty three of 77(42.6%) were identifed as P. nigrescens, 10 of 77(12.9%)were P. gingivalis, 6 of 77(7.8%) were P. endodontalis, 10 of 77(12.9%) were P. intermedia. On the contrary the reference strains of P. nigrescens, experimental strains of P nigrescens was sensitive to kanamycin in special potency disk test. 165 rRNA gene PCR and API test after rapid presumptative identification methods, such as special potency disk test and filter paper spot test, would be accurate detection methods for black-pigemented bacteria.

• 대한임상검사과학회지
• /
• 제38권1호
• /
• pp.45-53
• /
• 2006

Anaerobic black-pigmented bacteria have been implicated in the endodontic infections. This group of microorganisms includes Porphyromonas endodontalis, P. gingivalis, Prevotella intermedia, and Prevotella nigrescens. The organisms display a wide variety of virulence factors that may be pertinent to acute endodontic infections. The aim of this study was to identify P. endodontalis, P. gingivalis, P. intermedia, and P. nigrescens by using the special potency disk test, filter paper spot test, 16S rRNA gene-directed PCR, and API 32A system. Microbial samples were collected from root canals of 33 intact teeth with necrotic pulp and apical periodontitis. Conventional laboratory methods were used to identify the strains of anaerobic black pigmented bacteria. Eighteen out of 33 samples were positive for the growth of black-pigmented bacrteria. Five colonies were cultured from each pure cultured colony from Brucella agar plates. Seventy seven colonies were positive for the growth of black-pigmented bacteria. Thirty three out of 77(42.8%) were identifed as P. nigrescens, 10 out of 77(13%)were P. gingivalis, 6 out of 77(7.8%) were P. endodontalis, 10 out of 77(13%) were P. intermedia. On the contrary the reference strains of P. nigrescens, experimental strains of P. nigrescens were susceptible to kanamycin in the special potency disk test. We concluded that after rapid presumptive identification methods, such as the special potency disk test and filter paper spot test were done, 16S rRNA gene PCR and API 32A test would be accurate detection methods for black-pigemented bacteria.