• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.123-128
• /
• 2006

Enzymatic deinking method can avoids the alkaline environment as usual required in chemical deinking, which consequently cuts chemical costs and reduced the white water pollution. The electrostatic wastepaper was dinked with commercial cellulolytic enzymes and surfactant in neutral pH and the effectiveness of deinking and the physical properties of deinked pulp were evaluated. The disintegrating efficiency of the electrostatic wastepaper in neutral pH was enhanced with enzyme treatments. Although the freeness of deinked pulp with enzymes was higher than that of deinked pulp with chemical deinking agents, the brightness of the enzymatic deinked pulp was slightly lower than that of the chemical deinked pulp. But, by additions of nonionic surfactants, the brightness of deinked pulp was increased with less residual ink particles and mechanical properties of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method.

• 펄프종이기술
• /
• 제39권5호
• /
• pp.12-19
• /
• 2007

Enzymatic deinking method can avoids the alkaline environment as usual required in chemical deinking, which consequently cuts chemical costs and reduced the white water pollution. The electrostatic wastepaper was dinked with commercial cellulolytic enzymes and surfactant in neutral pH and the effectiveness of deinking and the physical properties of deinked pulp were evaluated. The disintegrating efficiency of the electrostatic wastepaper in neutral pH was enhanced with enzyme treatments. Although the freeness of deinked pulp with enzymes was higher than that of deinked pulp with chemical de inking agents, the brightness of the enzymatic deinked pulp was slightly lower than that of the chemical deinked pulp. But, by additions of nonionic surfactants, the brightness of deinked pulp was increased with less residual ink particles and mechanical properties of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.47-54
• /
• 2015

In this study, effects of kneading treatment on the properties of hardwood bleached kraft pulp (HwBKP), softwood bleached kraft pulp (SwBKP) and hardwood bleached chemi-thermo-mechanical pulp (HwBCTMP) were elucidated with a laboratory two-shaft kneader. Kneading treatment was performed at 30% (w/w) of pulp concentration and the number of passes through the kneader was adjusted from 0 to 10 passes. Then, changes in properties of pulp fibers were evaluated. It was found that fiber characteristics were influenced by kneading treatment. Fiber length was decreased with kneading while other morphological properties such as fiber width, curl and kink became increased as the number of passes through the kneader increased from 0 to 5 passes. The magnitude of changes in the morphological properties of softwood chemical pulp was the largest, followed by hardwood chemical pulp. The morphological properties of HwBCTMP were little influenced by kneading treatment. Swelling of fiber measured by WRV was increased with kneading except of HwBCTMP.

• 펄프종이기술
• /
• 제32권4호
• /
• pp.74-80
• /
• 2000

A series of studies on nitric-acid pulping of municipal recycled waste papers were carried out to substitute the bleached chemical pulp imported for producing printing paper as well as to use its solidified spent-liquor as fertilizer. The first experiment was carried out to find the optimum treatment conditions such as pulp consistency, nitric acid charge and temperature in $HNO_3$-alkali pulping process. The results obtained were as follows: 1. Some selective delignification of OCC pulp was conducted by $HNO_3$-alkali process. The higher the temperature and concentration of nitric acid, the lower the pulp yield and kappa number of treated pulp. while its brightness was increased. 2. The higher consistency required the stronger mixing in case of more than 5% pulp. 3. In the laboratory, the suitable $HNO_3$-treating condition seemed to be less than 6% consistency, lower than 500% $HNO_3$charge on pulp and lower than $100^{\circ}C$ in cooking temperature. 4. The spent liquor with 1.77% N-content seemed to be slow-release nitrogen fertilizer suitable for agriculture.

• 펄프종이기술
• /
• 제47권6호
• /
• pp.73-80
• /
• 2015

Corn stalk is the lignocellulosic biomass, which remain as leftover after harvesting. To use the corn stalk as raw material for paper industry, soda pulping was applied. In chemical compositional analysis, extractive contents of corn stalk (45.1%) was higher than hardwood. With corn stalk pith, soda pulp yield was 25.3% at 10.6 Kappa number, but 39.5% yield with 14.8 Kappa number for corn stalk rind. Higher extractives content in pith is one of the reason for lower pulp yield than rind. Pith pulp fibers had higher fines content than rind pulp. Pith parenchyma cell was removed as fines during pulping or washing process, which caused the lower yield. To use the corn stalks as a raw material for paper making, de-pith process is essential for higher pulp yield and longer pulp length.

• 한국식품과학회지
• /
• 제28권2호
• /
• pp.226-231
• /
• 1996

복숭아 펄프를 serum-pulp방법에 따라 serum과 불용성 펄프로 분리하고 serum만을 농축하면서 초기에 발생하는 증기를 회수하여 방향성분 획분으로 사용하였다. 농축 복숭아 펄프는 농축 serum, 불용성 펄프와 회수한 방향성분을 흔합제조하여 전체적으로 2배 농축하였다. 농축 복숭아 펄프의 향기성분은 DHC법으로 추출하여 GC와 GC/MS로 분석하고 관능검사한 결과 10%회수된 방향성분 획분을 첨가하는 것이 우수한 향기성분을 유지하는 고품질의 농축 펄프를 생산하는데 적합한 조건으로 나타났다.

• 펄프종이기술
• /
• 제37권5호통권113호
• /
• pp.41-49
• /
• 2005

This paper deals the effect of anthraquinone (AQ) on the contribution of sulphidity in kraft pulping of sapwood. The pulping conditions namely- active alkali concentration, pulpingtime, temperature and liquor ratio were varied in low ($15\%$) and high ($30\%$) sulphidity. $0.1\%$ AQ was added in the low and high sulphidity pulping with varying active alkali concentration and cooking time. At optimum conditions, low sulphidity kraft process produced about $44\%$ pulp yield with kappa number of about 23. But in high sulphidity kraft process kappa number was reduced to about 20 at the same yield. An addition of AQ reduced alkali requirement by $2\%$ on oven dried raw material and cooking time by 1 hour to produce pulp yield of about $44\%$ at kappa number 20. AQ is more effective in low sulphidity pulping than the high sulphidity pulping. The breaking length of kraft-AQ pulp was slightly higher than that of kraft pulp.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.177-180
• /
• 2006

Inter-fiber bonding is improved by refining resulting in higher Young's modulus. This effect is consistent to the changes of FTIR absorption intensities associated with the hydroxyl groups in the pulp samples. A PLS model, which is established to correlate the FTIR spectral data with the Young's modulus of the pulp samples for predicting the elastic Young's modulus of paper, is statistically robust.

• 한국인쇄학회지
• /
• 제30권3호
• /
• pp.57-64
• /
• 2012

When papers each made with sea-algae pulp 1%, 5% and soft, hard wood pulp were aged for 12days. Paper made with soft wood pulp is 30% loss of folding endurance, made with hard wood pulp is 50% loss of folding endurance. On the other, papers each made with 9% sea-algae pulp and soft, hard wood pulp were 18% loss of folding endurance. In the aging test of paper made with different freeness paper made with 300ml CSF, is more effective than 400ml CSF, 500ml CSF.

• 대한치과의사협회지
• /
• 제54권8호
• /
• pp.658-665
• /
• 2016

Treatment of immature permanent teeth with irreversibly damaged pulp has been challenging in dental practice because of the lack of apical constriction, thin dentinal walls, and short roots. This may lead to the extrusion of filling materials, and fracture of the root due to its more fragile feature during shaping of the root canal. Apexification with calcium hydroxide or MTA is one of the treatment options for these cases. Although favorable results of apexification have been reported, these treatment procedures do not guarantee the increase of root length and/or width even after a long term period. Thus, treated teeth are still prone to fractures. Recently, pulp revascularization has been proposed as an alternative treatment for immature teeth with necrotic pulp and periapical pathosis. Pulp revascularization allows the stimulation of the apical development and the root maturation. There have been many treatment protocols using various materials such as antibiotics and calcium hydroxide medicament. In this case report, literature review about pulp revascularization and two related cases are presented.