• 대한장애인치과학회지
• /
• 제10권2호
• /
• pp.84-88
• /
• 2014

1. 순측접근법은 치수치료를 순측으로 시행한 후 변색된 순측의 치질을 확대하여 삭제하고 레진으로 순면전체를 수복함으로써 치수치료와 동시에 심미성을 회복할 수 있다. 2. 순측으로 치수치료를 시행하므로 시야가 확보에 유리하고 기구조작이 용이해 행동조절이 잘 되지 않는 어린이에게 추천된다.

• 펄프종이기술
• /
• 제46권1호
• /
• pp.39-45
• /
• 2014

Various approaches have been tried to reduce the emission of carbon dioxide in paper industry. One of important approaches is to use PCC manufactured from emission gas as a filler. However, it was recognized that PCC is inferior to other fillers in the paper strength properties of view. Therefore, pretreatment of PCC with pulp powder was tried to mitigate the strength reduction of paper. Pretreatment of PCC with pulp powder improved the bulk(7.4~12.9%) and air permeability(24.8~42.98%), but there is no significant change in opacity. Tensile index, burst index and stiffness were decreased by the use of pretreated PCC with pulp powder. Anionic and cationic PAM were used as a additive for PCC pretreatment in order to improve strength properties. There was no significant change in bulk in all kinds of PAM used in this study. Most strength properties were improved by the pretreatment of PCC with the anionic and cationic PAM and pulp powder, although the opacity and stiffness were more or less decreased.

• Journal of the Korean Wood Science and Technology
• /
• 제33권3호통권131호
• /
• pp.79-88
• /
• 2005

연구는 폐표고목을 제지용 원료로 활용하기 위한 기초자료로 1년부터 5년 동안 재배한 표고골목을 이용하여 목재 성분 조성과 크라프트 펄프화 특성을 평가하였다. 그 결과 화학조성의 경우 변재에서는 재배기간이 증가함에 따라 글루코스와 자일로스의 감소가 크게 나타났으나 심재부에서는 큰 차이가 나타나지 않았으며 정선수율과 리젝트 함량 모두 재배기간이 증가함에 따라 감소하였다. 펄프 특성에서도 재배기간 증가에 따라 섬유장과 폭, 여수도는 감소하였으며 폐표고골목 크라프트 펄프를 국산 폐골판지에 첨가 시 종이의 건조 강도가 향상되었다. 이상의 결과로 폐표고목 크라프트 펄프를 다른 장섬유 펄프와 혼합사용 시 강도 향상과 고해 에너지 감소를 기대할 수 있을 것으로 사료된다.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.41-48
• /
• 1999

This study was intended to investigated the effect of pulp type and intital calendering on the properties of recycled fiber. As the number of recycling is increased, at least by the fourth recycling , the freeness of the SW-BKP and HW-BKP increased. And then that decrease after the fifth recycling. Especially the freeness of CTMP increased more rapidly than any other pulp in first recycling. And there was no difference of freeness in all kind of pulp by initial calendering . The speed of dewatering in making sheet consistetly became slow by proceeding recycling on condition of all calendering. and the order of the speed of dewatering was as followed. CTMP>HW-BKP>SW-BKP. However in case of HW-BKP, which was low -yield pulp, the tendency of the speed of dewatering was similar to that of CTMP which was high-yield pulp and had high content lignin . There was no change of fiber length and no effect of calendering by recycling of HW-BKP and CTMP. Howeverfiber length of SW-BKP generally decreased, especially in calendering of high temperature and high pressure conditions. The WRV of SW-BKP diminished by proceeding recycling but that of HW-BKP and CTMP diminished in the first recycling and then there was no change of the WRV of HW-BKP and CTMP. The contents of fines of HW-BKP consistently decreased by the fourth recycling and then increased in the fifth recycling . On the other hand there was no tendency in the content of fines of SW-BKP and CTMP by the number of recycling.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 춘계학술발표회 논문집
• /
• pp.169-169
• /
• 2011

Xylans are polysaccharides present in large amounts in cell walls of land plants. However, during kraft cooking, a high portion of hemicelluloses including xylans are dissolved in the cooking liquor. In the current trend for a more effective utilization of biomass, attention has been paid to the exploitation of xylans as strength-enhancing additives for paper. It is believed that surface xylan adds flexibility to the cell wall/fiber surface, resulting in stronger fiber-fiber joints or greater contact area between the fibers. Accordingly, there is proposal for a new pulping process involving the extraction of xylan prior to pulping, followed by their re-adsorption on the unbleached pulp. A suitable bleaching process should be employed then, which ought to does not only improve the brightness of the pulp, but also remain the effect of the adsorption of xylan on pulp fibers. The objective of this research was to investigate the impact of hydrogen peroxide bleaching on the properties of unbleached hardwood kraft pulp pretreated with birchwood xylan by measuring optical properties (brightness, post color number, opacity) as well as physical properties (tensile index, tearing index, bulk) of handsheets made from the bleached pulp. In the meantime, the influence of process variables of peroxide bleaching including bleaching temperature, time, initial pH and $MgSO_4$ dosage were studied.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권1호
• /
• pp.7-15
• /
• 2010

Complex human tissues harbor stem cells and precursor cells, which are responsible for tissue development or repair. Recently, dental tissues such as dental pulp, periodontal ligament (PDL), dental follicle have been identified as easily accessible sources of undifferentiated cells. These tissues contain mesenchymal stem cells that can be differentiate into bone, cartilage, fat or muscle by exposing them to specific growth conditions. In this study, the authors procured the stem cell from pulp, PDL, and dental follicle and differentiate them into osteoblast and examine the bone induction capacity. Dental pulp stem cell (DPSC), periodontal ligament stem cell (PDLSC), and dental follicle precursor cell (DFPC) were obtained from human 3rd molar and cultured. Each cell was analyzed for presence of stem cell by fluorescence activated cell sorter (FACs) against CD44, CD105 and CD34, CD45. Each stem cell was cultured, expanded and grown in an osteogenic culture medium to allow formation of a layer of extracellular bone matrix. Osteogenic pathway was checked by alizarin red staining, alkaline phosphatase (ALP) activity test and RT-PCR for ALP and osteocalcin (OCN) gene expression. According to results from FACs, mesenchymal stem cell existed in pulp, PDL, and dental follicle. As culturing with bone differentiation medium, stem cells were differentiated to osteoblast like cell. Compare with stem cell from pulp, PDL and dental follicle-originated stem cell has more osteogenic effect and it was assumed that the character of donor cell was able to affect on differential potency of stem cell. From this article, we are able to verify the pulp, PDL, and dental follicle from extracted tooth, and these can be a source of osteoblast and stem cell for tissue engineering.

• 펄프종이기술
• /
• 제31권1호
• /
• pp.31-38
• /
• 1999

Adsorption of polymeric flocculants and dry strength agents onto the surface of papermaking fibers is critical for their effective utilization since the polymeric substances not adsorbed on fibers or fines keep recirculating in the papermaking system to cause various operational difficulties and loss of raw materials. Problems associated with the unadsorbed polymeric substances generate great attention because unprecedent interests in utilization of recycled papers and papermaking system closure. In this study, to understand the effects of recycling on the adsorption propensity of cationic polyacryamide (PAM) dry strength resin onto hardwood bleached kraft pulp fibers and fines a systematic approach was followed. Never dried bleached hardwood kraft pulp was recycled in two different ways. In mode one recycling experiment never dried pulp was beaten then recycled three times by employing simple drying and disintegrating steps. In mode two recycling experiment beating of the recycled pulp was carried out after each recycling step. Adsorption of cationic PAM on fibers and fines was evaluated employing Kjeldahl nitrogen analysis method. The influence of recycling on water retention value, carboxyl content, sheet density and tensile strength of the pulp was examined. As the number of recycling increased, water retention value of the fiber was reduced due to hornification and this in turn caused a decrease in adsorption of cationic PAM. On the other hand, the carboxyl content of the recycled fibers increased because of the oxidation of fibers occurred during drying, and this caused an increase in adsorption of cationic PAM. Because of these two opposing factors the adsorption of the cationic PAM on the recycled fibers decreased and then increased slightly at third recycling step. Increase of PAM adsorption, however, did not provide did not provide and strength improvement for the recycled pulp fibers indicating greater influence of the honification on interfiber bonding.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.111-116
• /
• 2006

The microstickes control effects of some fixing agents, including an inorganic PAC, an organic polyamine (PA) and polydiallydimethyl ammonium chloride (Pdadmac), and a high cationic starch (HCS), were investigated, together with their effects on wet end performances and physical properties of handsheets. Despite that the HCS and Pdadmac had lower cationic charge densities than the PA and PAC (the HCS being even lower), they gave higher zeta potentials to fibers, and lower turbidities, cationic demands and residual COD contents to the pulp liquid phases than the PA and PAC did. In all cases, the HCS showed even better effects than the Pdadmac. In addition, drainage speed was also much higher by the HCS treatments although paper formation was worsened. All the phenomena showed that the HCS can fix more dissolved and colloidal substances to cellulose fibers, indicating that the HCS functioned mainly with flocculation and even hydrogen bonding mechanisms. Data on optical properties further indicated that the HCS interacted preferentially with colloidal substances, since it fixed more 'dirty' microstickes to fibers which decreased more sheet brightness while increasing more sheet opacity (with both higher light absorption and scattering coefficients). Interestingly, the organic fixing agents did not decrease tensile, tearing, and folding strengths of paper sheets made from 100% recycled newsprint pulp, except when they were dosed in high amounts. On the contrary, the inorganic PAC had more serious negative effects on the strength properties, especially on folding endurance. The study suggested that proper use of the HCS can lead to better microstickies control effects than traditional agents and methods.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.5-14
• /
• 2015

Recently, the use of wood resources has been limited due to global environmental change, like global warming and desertification. It is very critical in Korea's paper industries because lots of virgin pulp are dependant on direct import from abroad for printing grade of paper. In this work, the alternatively best available technique for reducing the import amounts of BKP (bleached Kraft pulp) was considered by mixing DIP (deinked pulp) and TMP (thermomechanical pulp) for the manufacture of high quality paper. Generally known, the sheet prepared from fibrous raw materials of DIP and TMP has lower strength and optical properties than that prepared from BKP. This study was aimed to improve the sheet quality by using DIP and TMP. 4 kinds of polyelectrolytes were approached to find out the best effects on physical strength and optical brightness improvements, and high retention behaviors with GCC (ground calcium carbonate). In conclusion, amphoteric PAM with 1,000,000 molecular weight (g/mol) and 0.5 charge density (meq/g) was best for the improvement of strength properties with the mixture of DIP and TMP. GCC retention rate was also the highest with cationic-PAM of above 2,000,000 molecular weight (g/mol) and about 2.0-3.0 charge density (meq/g) of strengthening agent.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.57-65
• /
• 2011

Pulping of paper mulberry (Broussonetia kazinoki) white bast has been examined by novel atmospheric pressure pulping methods. The viscosity of pulp has been found to be highly sensitive and variable with pulping methods. Therefore, selections of pulping chemicals and conditions are very important. Two kinds of pulping procedures were employed for the high viscosity pulp manufacturing. The one is ammonium oxalate treatment and the other is sodium chlorite and acetic acid treatment. Not only chemical components and pulp yields which of paper mulberry white bast but also water retention value (WRV), whiteness index, yellowness index, and colors of every pulp were examined. The hot water, 1% NaOH, and ethanol-benzene extractives which of paper mulberry white bast were 4.48%, 28.45%, and 2.84%, respectively. The contents of holocellulose, lignin, and ash were 90.66%, 1.05%, and 2.18%, respectively. In the pulp yields, group 1 which treated with only ammonium oxalate were 77.04-81.71%, group 2 which treated with ammonium oxalate and acidified sodium chlorite separately and washed between first and second stages were 64.15-83.90%, group 3 which treated with ammonium oxalate and acidified sodium chlorite separately and not washed between first and second stages were 57.35-73.17%, and group 4 which treated with mixed ammonium oxalate and acidified sodium chlorite were 66.58-68.43%. The pulps treated with acidified sodium chlorite showed high whiteness index, but the pulps treated with only ammonium oxalate showed high yellowness index. Variations in the combinations of treatments resulted in different pulp characteristics.