• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.180-186
• /
• 1999

Eugenol has been reported to reduce odontogenic pain and is known to have a structure similar to capsaicin, a potent stimulant of certain nociceptors. We have hypothesized that the analgesic effect of eugenol may be due, in part, to inhibition of capsaicin-sensitive nociceptors. To test this hypothesis, we evaluate whether eugenol inhibits capsaicin-sensitive release of immunoreactive calcitonin generated peptide(iCGRP) from bovine dental pulp. Freshly extracted bovine incisors were transported to the lab. on ice, Spilitted and pulp tissue was removed. The tissue was chopped into 200${\mu}m$ slices. Dental pulp was superfused(340 ${\mu}l/min$) in vitro with oxygenated Kreb's buffer. Eugenol and vehicle(0.02% 2-hydroxyl-${\beta}$-cyclodextrin) were administered prior to stimulation of pulp with capsaicin and iCGRP was measured by RIA. The results were as follows: 1. Administration of eugenol has no effect on basal release of iCGRP. 2. In the vehicle treated group, capsaicin evoked a 2.5-fold increase over basal iCGRP levels. 3. Administration of eugenol(600 ${\mu}M$) reduced capsaicin evoked release of iCGRP by more than 40%(153.4${\pm}$41.1% vs 258.9${\pm}$21.7%). 4. 2-hydroxylpropyl-${\beta}$-cyclodextrin of less than 0.02% is found to be an effective vehicle to dissolve eugenol without evoking iCGRP release from dental bovine pulp. These data indicate that eugenol inhibits pulpal capsaicin-sensitive fibers and suggest that intracanal medicament of eugenol may relieve pain, in part, by this mechanism.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.52-60
• /
• 2006

Environment-friendly shock-absorbing materials were made of wastepaper such as Korean old corrugated containers(KOCC) and Korean old newsprint (KONP) with a vacuum forming method. The plate-like cushioning materials made of KOCC and KONP respectively by vacuum forming showed superior shock-absorbing properties with lower elastic moduli compared to expanded polystyrene (EPS) and pulp mold. Even though the plate-like materials had many free voids in their fiber structure, their apparent densities (${\approx}0.1g/cm^3$) were a little higher than that of EPS (${\approx}0.03g/cm^3$) and much lower than that of pulp mold(${\approx}0.3g/cm^3$). However, the elastic moduli of the cushioning materials made of wastepaper were much lower than that of EPS or pulp mold. This finding implies that the cushioning materials made of KOCC fibers containing more lignin than KONP show better shock-absorbing properties than KONP. Moreover, the cushioning materials made of KOCC and KONP respectively showed greater porosity than pulp mold. The addition of cationic starch to the cushioning materials contributed to the increase in the elastic modulus to the same level as that of EPS. Furthermore, the deterioration in fiber quality by repeated use of wastepaper played a positive role in improving shock-absorbing ability.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.2
• /
• pp.242-249
• /
• 2018

The purpose of this study is to compare the properties of dental pulp and periodontal ligament stem cells from extracted supernumerary teeth by quantitative real-time PCR. Impacted supernumerary teeth in the maxillary anterior region were extracted. Dental pulp and periodontal ligament cells were collected from extracted supernumerary teeth on the same day. After isolation and culture of cells, compare characterization of them by using qRT-PCR. Primer sequences for odontoblasts are ONT, ALP, OCN, DMP-1 and DSPP. On dental pulp group, ONT has the largest quantity of gene expression, followed by OCN, ALP, DMP-1 and DSPP. On periodontal ligament group, ONT has the largest quantity of gene expression, followed by OCN, ALP, DSPP and DMP-1. Analysis of quantitative gene expression data using relative quantification showed that the expression of all genes decreased in periodontal ligament cells. Dental pulp and periodontal ligament stem cells from supernumerary teeth have the properties of odontoblasts. Considering that properties, supernumerary teeth were considered a useful donor site of dental pulp and periodontal ligament stem cells.

• Archives of Plastic Surgery
• /
• v.39 no.6
• /
• pp.637-642
• /
• 2012

Background Fingertip injuries involving subtotal or total loss of the digital pulp are common types of hand injuries and require reconstruction that is able to provide stable padding and sensory recovery. There are various techniques used for reconstruction of fingertip injuries, but the most effective method is functionally and aesthetically controversial. Despite some disadvantages, cross-finger pulp flap is a relatively simple procedure without significant complications or requiring special techniques. Methods This study included 90 patients with fingertip defects who underwent cross-finger pulp flap between September 1998 and March 2010. In 69 cases, neurorrhaphy was performed between the pulp branch from the proper digital nerve and the recipient's sensory nerve for good sensibility of the injured fingertip. In order to evaluate the outcome of our surgical method, we observed two-point discrimination in the early (3 months) and late (12 to 40 months) postoperative periods. Results Most of the cases had cosmetically and functionally acceptable outcomes. The average defect size was $1.7{\times}1.5$ cm. Sensory return began 3 months after flap application. The two-point discrimination was measured at 4.6 mm (range, 3 to 6 mm) in our method and 7.2 mm (range, 4 to 9 mm) in non-innervated cross-finger pulp flaps. Conclusions The innervated cross-finger pulp flap is a safe and reliable procedure for lateral oblique, volar oblique, and transverse fingertip amputations. Our procedure is simple to perform under local anesthesia, and is able to provide both mechanical stability and sensory recovery. We recommend this method for reconstruction of fingertip injuries.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.566-577
• /
• 2015

White Jabon (Anthocephalus cadamba Miq.) is one of the fast growing species in Indonesia and has the potential as the raw material for pulp and paper. In this research, 3, 5, and 7 years old White Jabon woods were pulped under different active alkali charge of 15%, 18%, 21%, 24%, and 27%, and its effect on delignification degree, kappa number, pulp yield, pulp viscosity, brightness, unbeaten freeness, and delignification selectivity was investigated. The results showed that tree age and active alkali concentration influenced the quality of pulp and pulping properties, except for that of unbeaten freeness. Delignification degree increased with increasing active alkali charge, and this brought about the decrease of pulp kappa number. The pulping yield tended to decrease below the Klason lignin of approximately 4%. Even though the 3 years old wood resulted in the highest brightness and highest delignification selectivity, the highest pulp viscosity was obtained with the 5 years old wood. The dominant fiber length of all wood ages was in the range of 1.2 - 2.0 mm. The 3 years old wood was considered to be the most promising raw material for kraft pulping in the view point of pulping properties, pulp quality and harvesting rotation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.29-37
• /
• 2006

To use bamboo in the pulp industry, the anatomical characteristics of 60-day-old, 1-year-old, 2-year-old, and 3-year-old moso bamboo (Phyllostachys pubescens Mazel), and the characteristics of fiber and sheet of alkali pulp made of moso bamboo were investigated. Moso bamboo is composed of metaxylens and parenchyma cells in the inner part of the wall, and thick-walled small bundle sheathes near the outer walls. Moso bamboo showed the heterogeneity in anatomical structure. The longest fibers were shown in the middle part, and the widest width in the inner part. The lignin contents were 14.4% in 60-day-old bamboo, which was not lignified yet. The lignin contents in bamboo above 1 year were approximately 35%. The yields of alkali pulp of moso bamboo were in the range between 41 and 47%, and the yields tend to decrease with the increase of ages. The lignin contents of 60-day-old bamboo were 2.1% and those of bamboo above 1 year showed approximately 4% to 5% increment. The length, width, and curl index of fiber in alkali pulp appeared to be similar in all ages. However, coarseness increased slightly with the increase of bamboo ages. The distribution of long fiber was shown much in 60-year-old bamboo. The optical and mechanical properties of moso bamboo tended to decrease with the increase of bamboo age.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.47-60
• /
• 2006

This study was carried out to investigate the sheet formation properties of Morus Hanjis, made of bast and whole stalk pulps by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping. Two species of Morus, M. alba and M. lhou, were used. Effect of morphological properties of pulp stocks on the sheet formation and its gray levels based on optical property were evaluated using an Image analyzer. In addition, the effect of fiber distribution index(FDI) which was calculated from tile data of Confocal laser scanning microscopy(CLSM) on the sheet formation and optical properties of Morus Hanji were also discussed. On the sheet formation, Hanji from whole stalk pulp was superior than that of bast pulp. The more the sheet formation improved, the more paper opacity decreased. In the aspect of Hanji's surface characteristics analyzed by an Image analyzer, the average gray level and its standard deviation of Hanji from the whole stalk pulp were rather lower than those of bast pulp because of better sheet formation of the former. However, high brightness Hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation. Sheet formation of whole stalk Hanji and its FDI measured by CLSM were higher than those of bast fibers. In conclusion, the sheet formation and opacity of Hanji could be evaluated by standard deviation value of Hanji's gray level using an Image analyzer and by fiber distribution index using CLSM.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.31-36
• /
• 2006

Tritium has been used to directly measure the exchangeable hydrogen in bleached softwood kraft pulp. The hydrogen atoms associated with hydroxyl groups in pulp or with water contained in the pulp can dissociate and exchange with the hydrogen atoms in bulk water. Tritium is a radioactive isotope of hydrogen and behaves almost identically to it. The distribution of tritium between pulp and water ($k_{pw}$) can be easily measured and becomes an index of the protons available fur hydrogen bonding. Bleached kraft pulp was refined in a PFI mill to a range of freenesses. Tritiated water was added and the amount exchanged measured. There was a slight steady increase in $k_{pw}$ until approximately 300 CSF; $k_{pw}$ then rose sharply between 300 CSF and 100 CSF. This rise appears to correlate with FSP. It is likely that the action of refining on the fiber reaches a threshold at about 300 CSF causing the fiber surface to break open creating exponentially more surface area. This theory is visually confirmed through light microscopy. The slow increase in fibrillation of the fibers above 300 CSF correlates with the increase in $k_{pw}$. Beyond the threshold of 300 CSF a dramatic difference in fibrillation is shown, also corresponding with the large increase in $k_{pw}$. The freeness difference around 300 CSF is small, but the change in fiber properties is extreme within this region. This change in properties could lead to sheet breaks and other disruptions when producing products around the threshold. This study leads to a better understanding of how fiber changes during refining, resulting in a practical benefit of target freeness determination. Presently, freeness is selected based on product quality and on some measure of runnability. Yet, there are other considerations, demonstrated by the extreme change in fiber properties around 300 CSF.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.685-693
• /
• 2015

In this study, we found that it is necessary to use the relatively new resource from seaweed extracts to extract and process pulp and create a local brand that can contribute to the local fishermen, development of new bio material, establishment of natural infrastructure, and acquisition of foreign investment. This study's seaweed pulp separation process is very overwhelming as seaweed is a compound of glycoside and polysaccharide. Nevertheless, we intend to develop a purification process and introduce applied technology to explore a new applied technology of pulp process. Once this technology is fully developed and mass produced, it would contribute to greater exports and increasing income level for the local fishermen. The ultimate goal of this study is to gather technical data from the first and second years of application, apply seaweed pulp to increase bio effect, and develop new functional bio-plastic packaging material, raw material, and samples with special characteristics of high molecules.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.4
• /
• pp.296-299
• /
• 1998

After orthognathic surgery, postoperative complications are studied by many clinician. The complications include sensory disturbance, jaw fracture, excessive bleeding, condylar positional changes and loss of pulp vitality. Few surgical procedures are as satisfying for the surgeon and patient as a well-done orthognathic surgery. On the other hand, the patient is more satisfied with the result than who are treated with only orthodontic treatment especially in severe deformity case. There are problems that patient overcome but it is not serious complications. One of these, the problem about loss of pulp vitality can't influence function but give a lot of discomfort to the patient. From September 1997 to January 1998, 7 patients who are treated for dentofacial deformity via Le Fort I osteotomy or anterior segmental osteotomy were examined pulp sensitivity using digital pulp tester. This preliminary study have a focus on the investigation of recovery of pulp vitality. The electric pulpal test were used at preoperative, postoperative, at intervals. And we report some results acquired from this study. Follwing result are obtained 1. In anterior segmental ostetomy case (1 case), total 12 teeth were examined. Postoperative 8 weeks, 1 tooth are positive reaction 2. In Le Fort I osteotomy case (6 case), total 71 teeth were examined. Postoperative 8 weeks, 5 teeth are positive reaction