• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.3
• /
• pp.436-442
• /
• 1997

Corn starch was extruded under relatively low shear, high moisture, and low temperature. Puffing of corn starch dough was induced by injecting $CO_2$gas in the range from 0MPa to 0.09MPa. Piece density and compressive modulus for puffed corn starch were decreased by increasing the injection pressure to 0.07MPa, and increased above 0.07MPa. the microstructure of corn starch puffed with $CO_2$gas showed thick cell size, compared with those puffed with steam. RVA paste viscosity curves of corn starch puffed with $CO_2$had different patterns from those puffed with steam, probably resulted from partial gelatinization of starch. Water absorption and solubility were not significantly changed by $CO_2$injection pressure, but the average degree of polymerization was reduced by higher $CO_2$injection. The water absorption, water solubility, and the average degree of polymerization for corn starch puffed with $CO_2$were significantly lower than those puffed with steam.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.6
• /
• pp.888-895
• /
• 2010

Riceyeotgangjung (RYG) with added spirulina was prepared with citron juice for masking of odor. Oil temperature for puffing was found to be $220^{\circ}C$ for frying dry rice based upon the results of expansion rate and color. RYGs with added spirulina (1, 2, and 3%) were prepared under the above conditions, and their physicochemical and sensory properties were examined under storage at $60^{\circ}C$ for 15 days. Moisture content of RYG decreased proportionally with the spirulina content and storage time. The hardness levels of the freshly made RYGs with spirulina were higher than that of control. During storage, the hardness of the control gradually increased, but those of the RYGs with spirulina gradually decreased, although no significant differences existed between the spirulina containing RYGs. Lightness and redness values in the Hunter color system decreased according to the spirulina content and storage time. Yellowness value also increased with the spirulina content and storage time. Phycocyanin and total phenolic content increased with spirulina content, but decreased with the storage period. Sensory evaluation results showed that RYG with 2% added spirulina received the highest scores for color, taste, overall acceptability, and intention of purchase. As a result, the optimal addition amount of spirulina to RYG is recommended to be 2%.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.45-49
• /
• 2001

This research was conducted to study the characteristics of the extruded products prepared from blends containing fixed amounts of frozen pollack (20%) and defatted soy flour (5%) and varying amounts of rice and corn flour using laboratory-scale single-screw extruder. Extrusion conditions were set at 27% feed moisture, $160^{\circ}C$ process temperature and 170 rpm screw speed. Results showed that there was almost no difference in proximate compositions among all extruded products. The product made from 100% rice flour had the highest expansion ratio, the lowest bulk density and the lowest shear force (P<0.05). Also, this product was the highest in L value and had the highest preference in sensory evaluation. Consequently, the addition of frozen pollack and defatted soy flour to rice flour could make desirable expanded extruded products. This study will form the basis for future development of rice snacks containing frozen pollack.

• Journal of Ginseng Research
• /
• v.42 no.3
• /
• pp.320-326
• /
• 2018

Background: Explosive puffing can induce changes in the chemical, nutritional, and sensory quality of red ginseng. The antioxidant properties of ethanolic extracts of red ginseng and puffed red ginseng were determined in bulk oil and oil-in-water (O/W) emulsions. Methods: Bulk oils were heated at $60^{\circ}C$ and $100^{\circ}C$ and O/W emulsions were treated under riboflavin photosensitization. In vitro antioxidant assays, including 2,2-diphenyl-1-picrylhudrazyl, 2,2'-azinobis-3-ethyl-benzothiazoline-6-sulfonic acid, ferric reducing antioxidant power, total phenolic content, and total flavonoid content, were also performed. Results: The total ginsenoside contents of ethanolic extract from red ginseng and puffed red ginseng were 42.33 mg/g and 49.22 mg/g, respectively. All results from above in vitro antioxidant assays revealed that extracts of puffed red ginseng had significantly higher antioxidant capacities than those of red ginseng (p < 0.05). Generally, extracts of puffed red and red ginseng had high antioxidant properties in riboflavin photosensitized O/W emulsions. However, in bulk oil systems, extracts of puffed red and red ginseng inhibited or accelerated rates of lipid oxidation, depending on treatment temperature and the type of assay used. Conclusion: Although ethanolic extracts of puffed red ginseng showed stronger antioxidant capacities than those of red ginseng when in vitro assays were used, more pro-oxidant properties were observed in bulk oils and O/W emulsions.

• Korean Journal of Food Science and Technology
• /
• v.38 no.3
• /
• pp.385-391
• /
• 2006

Physicochemical properties of hydroxypropylated waxy rice starches were investigated to reduce steeping-time of yukwa (Korean oil-puffed rice snack) processing. Swelling power of hydroxypropylated waxy rice starch increased at relatively higher temperature $(60^{\circ}C)$ than native waxy rice starch $(70^{\circ}C)$. Solubility of hydroxypropylated waxy rice starches increased with increasing propylene oxide content. Pasting temperature $(66.3-66.9^{\circ}C)$ and peak viscosity (216-232 RVU) of hydroxypropylated waxy rice starch were higher than those of native starch (179 RVU) and increased with increasing propylene oxide content. DSC thermal transitions of hydroxypropylated waxy rice starches shifted toward higher temperature. Amylopectin melting enthalpy of hydroxypropylated waxy rice starch (8.4-9.2 J/g) was similar to native starch (9.0 J/g). X-ray diffraction patterns of native and hydroxypropylated waxy rice starches showed typical A-type pattern with no significant differences between them, suggesting hydroxypropylation only affected amorphous region. Results suggest hydroxypropylated waxy rice starch is not applicable for yukwa due to low puffing efficiency and dark color.

• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.251-256
• /
• 1995

Sucrose is added to feed materials to alter the taste and texture of extruded products. Emulsifier can affect extrudate properties by forming complexes with amylose during extrusion-cooking. These ingredients may improve the cell structure and texture of cornmeal extrudates obtained by using $CO_{2}$ as a bubble forming agent. The objective of this study was to evaluate effects of sucrose (5% and 10%) and glyceryl monostearate (GMS) (0.75% and 1%) on properties of cornmeal extrudates produced with $CO_{2}$ at injection pressures from 1.04 to 2.07 MPa. Dough temperature increased and die pressure decreased when $CO_{2}$ was injected into barrel. The addition of sucrose to cornmeal resulted in decreasing dough temperature, specific mechanical energy (SME) input, and die pressure. SME input was not significantly influenced by GMS addition but die pressure was decreased when GMS was added. Extrudate density was decreased over observed $CO_{2}$ injection compared to GMS. WSI was significantly decreased with the addition of GMS. Paste viscosity was also decreased with addition of sucrose or GMS, but significant differences of paste viscosity among $CO_{2}$ injection pressures were not found. Stucture forming and texture of cornmeal extrudates by $CO_{2}$ injection was improved by adding GMS.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.30-36
• /
• 2008

In this study, raw ginseng produced by different method; was puffed and the absorption characteristics of the puffed ginseng powders were investigated Raw ginseng preparations, including white ginseng lateral root (WGL), red ginseng lateral root (RGL) and red ginseng main root (RGM) with 15 % moisture were puffed at a pressure of $7kg_f/cm^2$. The equilibrium moisture contents of puffed powders were affected by temperature and water activity. The monolayer moisture content determined by 1he BET equation was 0.034-0.045g $H_2O/g$ solid. The $R^2$ parameter of 1he BET equation was higher than that of the GAB equation. The absorption enthalpies, calculated using various water activities, showed a decreasing trend with increasing water activity. Amongst models applied for predicting equilibrium moisture content, 1he Kuhn model was 1he best fit for puffed ginseng powders, giving 1he lowest prediction deviation of 2.83-8.65% The prediction model equation for water activity included 1he variable of time, water activity (RH/l00) and temperature, whereas an equation featuring the parameters of time and water activity was the best model equation identified.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1352-1363
• /
• 2015

This study was carried out to investigate the characteristics of the dependent variables depending on the condition changes of independent variable of the operation and the material during the production of collets added with rice and dried shrimp by using single extruder to utilize as basic data for the manufacture of extrusion collets. A total of 7 independent variables were set up as a raw, 20, 40 and 60 mesh for the powder particle size of rice; 12, 14, 16 and 18% for the moisture content of rice; 2, 4, 6 and 8% for the addition amount of dried shrimp; 90, 95, 100 and $110^{\circ}C$ for the barrel temperature; 210, 280 and 340 rpm for the screw speed; 4, 6, 8 and 10 mm for the discharge port diameter; 30, 40, 50 and 60 kg/h for the input amount of the mixed material. The characteristics of the dependent variables including puffing ratio, moisture content, lightness, uniformity, productivity of collets was to be studied by changing the conditions of the independent variables. As a results of this study, 20 mesh of powder particle size of rice, 14% of moisture content of rice, 4% of addition amount of dried shrimp, $100^{\circ}C$ of barrel temperature, 280 rpm of screw speed, 6 mm of discharge port diameter and 50 kg/h of input amount of mixed material were found to be the most preferable over other independent variables for the production of extrusion collets. In conclusion, it is necessary to set the independent variable in order to produce the high quality collets added with the rice as the main raw material and dried shrimp as the sub-materials.

• Journal of Animal Science and Technology
• /
• v.46 no.2
• /
• pp.261-272
• /
• 2004

This study was conducted to investigate indices affecting composts maturity for swine manure compost produced in a commercial composting facility with air-forced from the bottom. The composting was made of swine manure mixed with puffing rice hull(6: 4) and turned by escalating agitator twice a day. Composting samples were collected periodically during a 45-d composting cycle at that system, showing that indices of Ammonium-N to Nitrate-N ratio were sensitive indicators of composting quality. Pile temperature maintained more than 62$^{\circ}C$ and water contents decreased about 20% for 25days of composting. A great variety and high numbers of aerobic thermophilic heterotropic microbes playing critical roles in stability of composts have been examined in the final composts, sbowing that they were detected $10^8$ to $10^{10}$ $CFUg^{-1}$ in mesophilic bacteria, $10^3$ - $10^4$ in fungi and $10^6$ - $10^8$ in actinomycetes, respectively. The results of this study for detennining a factor affecting compost stability evaluations based on composting steps were as follows; 1. Ammonium-N concentrations were highest at the beginning of composting, reaching approximately 421mg/kg. However Ammonium-N concentrations were lower during curing, reaching approximately l04mg/kg just after 45 day. The ratio between $NH_4-N$ and $NO_3-N$ was above II at the beginning of composting and less than 2 at the final step(45 day). 2. Seed germination Index was dependent upon the compost phytotoxicity and its nutrition. The phytotocity caused the GI to low during the period of active composting(till 25 days of composting time) depending on the value of the undiluted. After 25 days of composting time, the GI was dependent upon compost nutrition. The Gennination index of the final step was calculated at over 80 without regard to treatments. 3. E4: E6 ratio in humic acid of composts was correlatively decreased from 8.86 to 6.76 during the period of active composting. After 25 days of composting time, the E4: E6 was consistently decreased from 6.76 to 4.67($r^2$ of total composting period was 0.95). 4. Water soluble carbon had a tendency to increase from 0.54% to 0.78%during the period of active composting. After 25 days of composting time, it was consistently decreased from 0.78% to 0.42%. Water soluble nitrogen increased from 0.22% to 0.32% during the period of 15 days after initial composting while decreased from 0.32% to 0.21% after 15days of composting. In consequence, the correlation coefficient($r^2$) between water soluble carbon and water soluble nitrogen was 0.12 during the period of active composting mule was 0.50 after 25 days of composting time