• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.1
• /
• pp.131-138
• /
• 2003

With the Internet winning a huge popularity, there rise urgent problems which are related to Network Security Managements such as Protecting Network and Communication from un-authorized user. Accordingly, Using Security equipments have been common lately such as Intrusion Detection Systems, Firewalls and VPNs. Those systems. however, operate in individual system which are independent to me another. Their usage are so limited according to their vendors that they can not provide a corporate Security Solution. In this paper, we present a Hierarchical Security Management Model which can be applicable to a Network Security Policies consistently. We also propose a Policy Negotiation Mechanism and a Prototype which help us to manage Security Policies and Negotiations easier. The results of this research also can be one of the useful guides to developing a Security Policy Server or Security Techniques which can be useful in different environments. This study also shows that it is also possible to improve a Security Characteristics as a whole network and also to support Policy Associations among hosts using our mechanisms.

• Advances in Computational Design
• /
• v.8 no.1
• /
• pp.13-36
• /
• 2023

The Puebla-Morelos Earthquake (Mw 7.1) occurred in Mexico in 2017 causing 44 buildings to collapse in Mexico City. This work evaluates the non-linear response of a 6-story reinforced concrete (RC) frame prototype model with masonry infill walls on upper floors. The prototype model was designed using provisions prescribed before 1985 and was subjected to seismic excitations recorded during the earthquakes of 1985 and 2017 in different places in Mexico City. The building response was assessed through a damage index (DI) that considers low-cycle fatigue of the steel reinforcement in columns of the first floor, where the steel was modeled including buckling as was observed in cases after the 2017 earthquake. Isocurves were generated with 72 seismic records in Mexico City representing the level of iso-demand on the structure. These isocurves were compared with the location of 16 collapsed (first-floor column failure) building cases consistent with the prototype model. The isocurves for a value greater than 1 demarcate the location where fatigue failure was expected, which is consistent with the location of 2 of the 16 cases studied. However, a slight increase in axial load (5%) or decrease in column cross-section (5%) had a significant detrimental effect on the cumulated damage, increasing the intensity of the isocurves and achieving congruence with 9 of the 16 cases, and having the other 7 cases less than 2 km away. Including column special detailing (tight stirrup spacing and confined concrete) was the variable with the greatest impact to control the cumulated damage, which was consistent with the absence of severe damage in buildings built in the 70s and 80s.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12C
• /
• pp.1194-1202
• /
• 2007

In this paper, we proposed a blind watermarking algorithm to apply to the rapid prototyping system. The 3D mesh model is used in the step of the CAD modeling before the making of the prototype system of the rapid prototyping system. STL type mesh modeling which is used in this system reduces the error of the system and improves the accuracy of the system. In the step of the CAD modeling, some transformations which do not change the model accuracy are used, but some transformations which change the model accuracy are not used because the mesh model error is related to the accuracy of the prototype system. Most watermarking algorithms embedded a specific random noise as the watermark information into the model. These kinds of the algorithms are not proper to the 3D model watermarking. The proposed algorithm can be used for the accurate prototyping system because it does not change the model after the watermark embedding This means it can be used for the copyright marking and the data integrity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1137-1143
• /
• 2011

The IHX (intermediate heat exchanger) of a VHTR (very high-temperature reactor) is a core component that transfers the high heat generated by the VHTR at $950^{\circ}C$ to a hydrogen production plant. Korea Atomic Energy Research Institute manufactured a small-scale prototype of a PCHE (printed circuit heat exchanger) that was being considered as a candidate for the IHX. In this study, as a part of high-temperature structural integrity evaluation of the small-scale PCHE prototype, we carried out high-temperature structural analysis modeling and macroscopic thermal and elastic structural analysis for the small-scale PCHE prototype under small-scale gas-loop test conditions. The modeling and analysis were performed as a precedent study prior to the performance test in the small-scale gas loop. The results obtained in this study will be compared with the test results for the small-scale PCHE. Moreover, these results will be used in the design of a medium-scale PCHE prototype.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.5
• /
• pp.807-814
• /
• 2003

3D printers are widely used to verify the designs in the early stage of product development, and are required to have short build time. However, the build time is still too long for a quick design review for engineers. This research focuses on how to split the prototype in order to reduce the build time and improve surface roughness. In order to verify the feasibility of prototype splitting, the build time and the roughness have been experimentally measured for various parts and build orientations. Based on the experimental results an expert system was developed for splitting the original CAD mod el by using an efficient splitting method. It can recommend a splitting plane based on build time, surface roughness and the number of divided parts. It is shown that the model splitting reduces the build time significantly and improves surface quality wit bout rough surfaces where the support was removed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.2
• /
• pp.275-281
• /
• 2010

In this paper, a geometric similarity law is introduced to the performance test of a large-sized silencer used in ship engine or plant system. A test of scale-down model enable to yield the cost and time saving in developing large-sized silencer considerably. Two types of silencer, resonator and expansion chamber, were analyzed by a theoretical method and an acoustical FEM(finite element method) in order to obtain geometric similarity variables. A method is proposed to estimate the transmission loss of prototype model using the test results of scale-down model. Two actual large-sized silencer, which consist of resonator and expansion chamber, were analysed by an acoustical FE analysis. Consequently, the proposed method predicts effectively the performance of prototype silencers using those of scale-down models.

• Journal of Information Processing Systems
• /
• v.16 no.2
• /
• pp.343-359
• /
• 2020

In this paper, a new algorithm is proposed for three-dimensional (3D) shape recognition using local features of model views and its sparse representation. The algorithm starts with the normalization of 3D models and the extraction of 2D views from uniformly distributed viewpoints. Consequently, the 2D views are stacked over each other to from view cubes. The algorithm employs the descriptors of 3D local features in the view cubes after applying Gabor filters in various directions as the initial features for 3D shape recognition. In the training stage, we store some 3D local features to build the prototype dictionary of local features. To extract an intermediate feature vector, we measure the similarity between the local descriptors of a shape model and the local features of the prototype dictionary. We represent the intermediate feature vectors of 3D models in the sparse domain to obtain the final descriptors of the models. Finally, support vector machine classifiers are used to recognize the 3D models. Experimental results using the Princeton Shape Benchmark database showed the average recognition rate of 89.7% using 20 views. We compared the proposed approach with state-of-the-art approaches and the results showed the effectiveness of the proposed algorithm.

• Journal of Biomedical Engineering Research
• /
• v.29 no.5
• /
• pp.392-399
• /
• 2008

Thin-film transistor (TFT) arrays for an x-ray detector require quite different design concept from that of the conventional active-matrix liquid crystal devices (AM-LCDs). In this paper anew design of TFT array which uses only SiNx for passivation layer is described to meet the detector performance and the product availability simultaneously. For the purpose of optimizing the design parameters of the TFT array, a Spice simulation was performed. As a result, some parameters, such as the TFT width, the data line capacitance, and the storage capacitance, were able to be fixed. The other parameters were decided within a permissible range of the TFT process especially the photolithography process and the wet etch process. Then we adapted the TFT array which had been produced by the proposed design to our prototype model (FDXD-1417 and evaluated it clinically by comparing with a commercial model (EPEX, Hologic, Beford, USA). The results say that our prototype model is slightly better than EPEX system in chest PA images. So we can prove the technical usefulness and the commercial values of the proposed TFT design.

• Journal of Biosystems Engineering
• /
• v.32 no.2 s.121
• /
• pp.69-76
• /
• 2007

This study was conducted to evaluate the sideways overturning stability of side loaded mini-forwarder. The model of a prototype was developed using a 3D CAD modeler and the performance was experimentally validated. The prototype model was run on the multibody dynamic analysis program, RecurDyn 6.0, to simulate motions when the model traversed over a circular bump on a inclined ground surface. The simulation was performed at a constant forward speed of 1.85 km/h under the loaded and unloaded conditions. The forward direction was also controlled to vary from 0 to 360 degrees with an increment of 10 degrees. Results of the simulation showed safe regions in which the mini forwarder could travel safely in terms of direction and slope of the ground. Even when the mini-forwarder was loaded by 20 logs of 3.6 m long and 12 cm diameter, it traveled safely within the ground slopes of 1 to 45 degrees by directions.

• Journal of Biosystems Engineering
• /
• v.14 no.3
• /
• pp.158-167
• /
• 1989

This study was conducted to investigate the applicability of true model theory in a powered lugged wheel-soil system and to examine the possibility of using principles of similitude in investigating the dimensions of soil parameters pertinent to a powered lugged wheel-soil system concerning the sinkage prediction. The following conclusions were derived from the study; 1) The sinkage of prototype wheels proved to be predicted by those of the model wheels for the range of the dynamic weight tested. 2) A conditional equation which can be used for the prediction of sinkage of prototype by model test was derived as $n_f=n{_\ell}{^{-b}}$. The range of the numerical value of b, which is the exponent on the length dimension of the soil property ${\alpha}$, was found to be -1.48~-2.54. 3) Considering a relatively wide variation of b values, it was concluded that there are several soil properties which are pertinent to the powered lugged-wheel soil system concerning the sinkage prediction.