• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.429-436
• /
• 2011

The G-PON is an efficient solution to implement the FTTH and have GEM frame to accomodate various protocols like Ethernet frames, IP packets, and TDM signals. Above all, the Ethernet is one of the most widely used 2nd layer protocol in the campus, the subscriber access, and the carrier service. So G-PON system has to provide an Ethernet interface with top priority. In this paper, we implement a gigabit Ethernet adapter based on Ethernet over GEM in the ITU-T G.984.3 to accommodate Ethernet protocol in the G-PON TC chip. The adapter maps each Ethernet frame to a single or multiple GEM frames and has several functions including generation of the GEM header, encapsulation of frames and the SAR. In particular, the adapter have converter (LUT) MAC address to port-ID which is a key to identify logical connections though it is not defined in specification but important. We implement the adapter with a FPGA and verify the functions of segmentation and reassembling, MAC address learning, and throughput with the logic analyzer and the Ethernet analyzer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.69-78
• /
• 2001

This paper presents the design and FPGA implementation of a FLEX PSP(Protocol Signal Processor) for the portable high speed paging system. In this approach, two algorithms are newly proposed for implementing the PSP which provides capabilities of the maximum 6,400bps at speed, high-channel throughput, real time error correction and an effective frame search function. One is an accurate symbol synchronization algorithm which is applied for synchronizing the interleaved 4-level bit symbols which are received at input stage of A/D converter, and the other is a modified fast decoding algorithm which is provided for realizing double error correction of (31,21)BCH signal. The PSP is composed of six functional modules, and each module is modelled in VHDL(VHSIC Hardware Description Language). Both functional simulation and logic synthesis have performed for the proposed PSP through the use of Synopsys$^{TM}$ tools on a Axil-320 Workstation, and where Altera 10K libraries are used for logic synthesis. From logic synthesis, we can see that the number of gates is about 2,631. For FPGA implementation, timing simulation is performed by using Altera MAX+ PLUS II, and its results will be also given. The PSP which is implemented in 6 FPGA devices on a PCB has been verified by means of Logic Analyzer.r.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.41-49
• /
• 2011

In this paper, we propose an open protocol to be employed between a smart meter concentrator and a metering data collection server, and also evaluate its performance. Legacy concentrators performs the connection establishment and data gathering operations with DLMS/COSEM protocol standards. However, we note that there are no standardized protocols between the concentrator and the collection server, which inevitably conduces each commercial smart metering system to have its own proprietary protocol. In order to solve this problem, we propose an open protocol - Smart Meter Concentrator Control Protocol(SMCCP) by extending the existing standard protocol(DLMS/COSEM). The SMCCP can provide the proxy mode to enable efficient transmission between the concentrator and the data collection server. It also can support the relay mode to enable a direct communication between the data collection server and each far end smart meter. We also implement an emulator system and a protocol analyzer to provide its operation. In addition, we evaluate the session holding time and the link usage ratio in both relay and proxy modes with OMNET++ simulator.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.75-77
• /
• 2006

In this paper, the technology of the conformance test for Broadcast Web Site Service (BWS) which is one of the data services of the T-DMB (Terrestrial Digital Multimedia Broadcasting) is proposed. First, the standard of the BWS Service is introduced and then the method of the conformance test of BWS bitstream and BWS receiver module is provided. A BWS bitstream analyzer is implemented for use in verifying the transmitted BWS bitstreams. To provide a means for the receiver manufactures to verify their own BWS receiver modules, a receiver test suite is developed including BWS test bitstreams and a BWS reference receiver module. The BWS bitstream analyzer includes the analysis function for the conformance test of MOT protocol, HTML, PNG, MNG, JPEG, and Ecma Script. Also, it was actually used for verifying the BWS test bitstreams. In the course of developing a HWS receiver module, 4he BWS receiver module under test can be verified by comparing the results of the BWS reference receiver module with those of the receiver module under test. when the same BWS test bitstreams are fed into the two receiver modules.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.10
• /
• pp.59-68
• /
• 1993

This paper describes implemation of 'General-purpose ETRI MAP interface module' (GEM) for Mini-MAP network. GEM operates as a Mini-MAP node in our FA system. To communicate between GEM and programmable devices(PD) such as PLC and CNC, serial communication is used. Application programs of a MiNi-MAP host system control and monitor programmable devices via GEM. GEM is implemented and tested on the basis of the MAP 3.0. TBC in the Nini-MAP board performs the function of the MAC sublayer. The LLC sublayer is implemented according to the specification of Class 3 that includes Type 1 and 3. And the MMS services are designed within the scope of implementation class MAP3. All the softwares are implemented under the real-time multitask OS for real-time application of the Mini-MAP and they are loaded into PROMs at the network board of GEM. We tested the LLC functions to make use of a protocol analyzer for the token-passing protocol. Also the MMS conformance test was carried out by exchanging primitives between GEM and a MMS product that had already passed the conformance test. Therefore GEM is proposed as a network tool of Computer Integrated Manufacturing (CIM) to integrate PDs which don't support MAP functions.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.46-54
• /
• 2015

Communication between ECUs (Electronic Control Units) in agricultural machineries tends to use IS011783 widely, that is PGN (Parameter Group Number) based communication protocol lays on CAN protocol by altering its identifier part. Messages in line are transferred and received between ECUs according to ISO11783 standard. This paper discusses about design of wireless monitoring system. We used an ARM Cortex-M3 microcontroller embedded development board and marvel8686 wireless module. The wireless ISOBUS monitoring system, attached to communication line, reads messages, interpret them, and display them on the screen in easily comprehendible form. It can be used to generate messages and monitor the traffic on physical bus systems. The monitoring system connected to ECUs, monitor and simulate real traffic of communication and functionality of the ECUs. In order to support our work, we have implemented the monitoring tool. The development consists of two parts: GUI of the application and firmware level programming. Hence the monitoring system is attached to the communication line and equipped by Wi-Fi module; farmer/dispatcher in a farm monitors all messages in communication line on personal computer and smart device.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.5
• /
• pp.583-589
• /
• 2002

The Internet is absolutely contributed to information telecommunication revolution nowadays. Realizing local network at the various type of buildings such as a company and a university, ethernet is used for subnet and FDDI, ATM are used for backbone mainly in order to get internet services. Processing TCP/IP protocol suite and analyzing the protocol exactly is essential to detecting the problem occurring in the network and developing communication equipment. This paper presents implementation of ethernet LAN protocol analyser which monitors and simulates ICP/IP protocol suite carrying the Internet and non-Internet protocol such as Netware and NetBIOS. MS window98 and visual C are used for development environment and application program operates on the NDIS firmware. The performance analysis on the proposed system is carried out as monitoring and simulating the traffic over LAN of a university. In the result of monitoring the system, the processing time of a packet captured over the LAN is about 1.5ms. In case of simulating the system, the processing time to be taken carrying out TCP connection and disconnection once is packet is about 8.6ms. The performance analysis of monitoring and simulation results satisfies with 10 Mbps ethernet LAN environment.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.186-196
• /
• 2015

In resource-constrained, low-cost, radio-frequency identification (RFID) sensor-based mobile ad hoc networks (MANETs), ensuring security without performance degradation is a major challenge. This paper introduces a novel combination of steps in lightweight protocol integration to provide a secure network for RFID sensor-based MANETs using error-correcting codes (ECCs). The proposed scheme chooses a quasi-cyclic ECC. Key pairs are generated using the ECC for establishing a secure message communication. Probability analysis shows that code-based identification; key generation; and authentication and trust management schemes protect the network from Sybil, eclipse, and de-synchronization attacks. A lightweight model for the proposed sequence of steps is designed and analyzed using an Alloy analyzer. Results show that selection processes with ten nodes and five subgroup controllers identify attacks in only a few milliseconds. Margrave policy analysis shows that there is no conflict among the roles of network members.

• Journal of Korean Society of Forest Science
• /
• v.96 no.5
• /
• pp.510-514
• /
• 2007

The main purpose of this study was to develop Mountain Search and Rescue System for enhancing search and rescue operations in the mountains. This study also focused on presenting an alternative to using a cellular phone for requesting rescue due to their unreliability in remote areas. This system is designed to help in the search and rescue of people in emergency situations in the mountains. It is composed of buzzer sensors, environmental information sensors, and a statistical analysis program. A key feature of this system is that it does not require an infrastructure of internet or CDMA networks for its operation in the mountains. The measure for the study was conducted by using a zigbee protocol analyzer, RF module and 433MHz Helical antenna to analyze the rate of data reception in relation to the distance between nodes. This system is applicable to mountains provided the distance between nodes is over 100 m and under 150 m.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.4
• /
• pp.9-19
• /
• 2008

In this paper, it is studied anti-collision algorithm based on the transmission protocol for RFID baseband system of the lSO/IEC 18000-6 Type-C regulation and designed the baseband part of RFID reader system using FPGA. To compensate this weak point of the slot random aloha algorithm which must have a long time to be dumped before deciding an appropriate slot size according to the number of surrounding tag, we suggested how to apply Bit By Bit algorithm to be able to recognize the tag when the tag is clashing. The design of the baseband part in the RFID reader system is accomplish by use of the ISE9.1i and I made an experiment on it targeting Spartan2. Construction verification is measured each block through Logic Analyzer and I can verify it has no error. I also compared and analyzed the performance between proposed algorithm and past algorithm and verified the improvement of performance.