• 제목/요약/키워드: protocol

검색결과 13,766건 처리시간 0.042초

확장슬롯 적응형 SECS-LExpressnet 프로토콜의 성능 분석 (Performance Analysis of Slot-Extension Adapt ive SECS-LExpressnet protocol)

  • 유동관
    • 한국컴퓨터정보학회논문지
    • /
    • 제8권2호
    • /
    • pp.106-111
    • /
    • 2003
  • 본 논문은 일반적인 버스 토포로지에서 라운드로빈 방식의 동작을 구현한 기존의 L-Expressnet 프로토콜이 채널이용률이 떨어지는 단점이 있어 이를 보완하고자 사이클 관리를 위한 컨트롤 스테이션과 슬롯 확장 기능을 적용시켜 성능을 개선시킨 다음에 이것의 성능을 기존의 방식들과 비교 분석하였다. 개선된 프로토콜의 성능 분석은 채널 이용률 관점에서 이루어졌으며 이것을 기존의 다른 프로토콜과 비교한 결과 컨트롤 스테이션과 슬롯확장 기능을 적용시킨 프로토콜이 기존의 여러 방식의 프로토콜보다 최대 정규화 전파지연 값이 커질 경우 더 나은 성능을 보임을 알 수 있었다.

  • PDF

체외수정시술시 과배란유도 방법이 임신율에 미치는 영향 (Effects of Cotrolled Ovarian Hyperstimulation (COH) Protocols on Pregnancy and Delivery Rate in In-Vitro Fertilization and Embryo Transfer)

  • 홍정의;이지삼
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제24권3호
    • /
    • pp.361-368
    • /
    • 1997
  • A total of 55 patients with various etiologies of infertility particitated in a study comparing two regimens of controlled ovarian hyperstimulation (COH) with GnRH agonists and gonadotropins. Nineteen patients were given an ultra-short stimulation protocol when the agonist was administered for 3 day from Day 2 of the cycle. The remaining 36 patients were given a long stimulation protocol when the agonist was administered from the mid-luteal phase of the cycle preceding the stimulation cycle. The mean number of gonadotropins used per patient was not different between two groups. No significant differences were found in the mean number of oocytes recovered, fertilization rate and embryo cleavage rate between two groups. Pregnancy and delivery rates were higher in ultra-short protocol than in long protocol, but these were not significant. These results suggest that an ultra-short protocol is as effective as a long protocol in in-vitro fertilization and embryo transfer.

  • PDF

전자식 전력량계용 한전 프로토콜 및 운영 프로그램 개발 (Develpoment of Automatic Meter Reading Program for Electronic Power Meter)

  • 유인협;장문종;현덕화
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 D
    • /
    • pp.2219-2221
    • /
    • 2001
  • A communication protocol for automatic meter reading is designed for electronic power meter. Communicational functions and data structures are standardized and data reading software is developed according to the developed protocol. The communication protocol is designed with reference specifications, IEC 62056-31 and Distributed Network Protocol(DNP). For design, communicational functions and specifications of the industrial meters were analyzed for the purpose of developing a new one for KEPCO meters. The protocol is designed with 3 layer model, physical layers, data link layer and application layer. A documentation was completed with data gathering, data classification, authentication, error detection. An emulator system was made for testing the protocol. A meter reading software was developed using the protocol. Many different protocols and meter reading softwares are integrated into one with the developed protocol and software as KEPCO's standard.

  • PDF

전자연동장치와 역정보전송장치간 인터페이스를 위한 데이터링크 프로토콜 성능해석 (Performance Analysis of Data Link Protocol for Interface between EIS and LDTS)

  • Hwang, Jong-Gyu;Lee, Jae-Ho
    • 한국철도학회논문집
    • /
    • 제6권2호
    • /
    • pp.135-141
    • /
    • 2003
  • According to the computerization of railway signaling systems, the interface link between these signaling equipment is also replaced by digital communication channel, expecially communication link for interface between EIS and LDTS, but there are some problems in the present state of railway signaling. First of all, different communication protocol is applied to interface between above two signaling equipment although they have same functions. The other is that the communication protocol currently used in railway field has some unreasonable points such as structure, formation of byte, error correction scheme and etc. To solve these problems, the standard communication protocol for railway signaling is designed. The structure of designed communication protocol and the results of performance analyses are represented in this paper. It will be expected the increase of safety, reliability and efficiency of maintenance of signaling system by using of the designed communication protocol for railway signaling.

성인 발열 환자를 위한 근거기반 간호 지침 개발 및 평가 (Development and Evaluation of an Evidence-Based Nursing Protocol for Fever Management in Adult Patients)

  • 신용순;김성렬;유성희;김선화;김정희;김현정;나라;채지선;이혜진;안영희;김경옥
    • 성인간호학회지
    • /
    • 제25권3호
    • /
    • pp.250-262
    • /
    • 2013
  • Purpose: This study was designed to develop, to implement and evaluate a fever management nursing protocol for adult patients. Methods: This study was conducted through seven steps following both the guideline development procedures of the Scottish Intercollegiate Guidelines Network and the Model of the Asan Medical Center Evidence-Based Practice, as follows: 1) identifying the clinical needs and composition of the protocol development group; 2) identifying and evaluating the evidence; 3) assessing the level of evidence and grading recommendations; 4) forming a protocol; 5) evaluating the protocol using an expert group validity test and identifying barriers to its implementation; 6) protocol development; and 7) evaluation of practical improvement measures following implementation of the protocol. Results: The evidence-based protocol for fever management in adult patients was completed and includes five domains and 15 items. The protocol had good content validity (CVI=.90) and nursing practice could be improved after implementation of the protocol. Conclusion: This nursing protocol can be used as a guide for nursing in febrile adult patients. We recommend that further guidelines be updated in an interdisciplinary manner in order to foster local adaptation of the best clinical practices.

낙관적 다자간 계약서 서명 프로토콜 라운드의 하한 (Lower bound on the Number of Rounds for Optimistic Multi-party Contract Signing Protocol)

  • 주홍돈;장직현
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제32권10호
    • /
    • pp.499-506
    • /
    • 2005
  • 네트워크의 성장은 전자상거래의 중요성을 증대시켰다. 그리고 공정교환 프로토콜은 전자상거래의 중요한 부분을 차지하므로 공정교환 프로토콜에 관련된 많은 연구들이 이루어졌다. 계약서 서명 프로토콜은 공정 교환 프로토콜의 일부로서 많은 연구가 이루어졌지만 대부분은 양자간 프로토콜에 집중되었다. 그리고 다자간의 계약서 서명 프로토콜에 대한 연구는 부족하였다. Baum-Waidner가 제시한 다자간 계약서 서명 프로토콜이 지금까지 알려진 가장 적은 수의 라운드를 가지는 비동기방식의 낙관적인 다자간의 계약서 서명 프로토콜이다[4]. 하지만, 낙관적인 다자간의 계약서 서명 프로토콜이 필요로 하는 라운드수의 하한은 알려지지 않았다. 본 논문에서는 낙관적인 다자간의 계약서 서명 프로토콜이 필요한 라운드수의 밀착 하한을 제시한다.

능동형 RFID 리더를 위한 효율적인 리더 프로토콜의 구현 (Implementation of An Efficient Reader Protocol for Active RFID Readers)

  • 문영식;정상화
    • 한국통신학회논문지
    • /
    • 제34권8B호
    • /
    • pp.822-829
    • /
    • 2009
  • 리더 프로토콜은 RFID 리더와 호스트 사이의 명령 수행/응답 및 태그 정보 교환을 담당하는 인터페이스이며, 관련된 표준들로 EPCglobal Low Level Reader Protocol(LLRP) 1.0.1, EPCglobal Reader Protocol(RP) 1.1 그리고 ISO/IEC 15961,15962 등이 있다. 하지만 현재 리더 프로토콜 표준들은 수동형 RFID 시스템에 초점을 두고 있어 능동형 RFID 시스템에서는 효율적이지 못하다. 본 논문에서는 EPCglobal LLRP 1.0.1을 기본으로 EPCglobal RP 1.1의 smoothing/filtering 기능을 추가하여 능동형 RFID 시스템에 효율적인 리더 프로토콜을 구현하였다. 구현한 리더 프로토콜은 RF 트랜시버와 RFID 리더와 태그 간의 Air interface 파라미터를 직접 설정 할 수 있다. 그리고 filtering 기능을 이용 리더와 호스트 간의 데이터 전송량을 줄이고, smoothing 기능을 이용 태그 수집 시 태그 수집성능 향상을 기대할 수 있으며, ISO/IEC 15961,15962 표준에 따른 태그 메모리 데이터 변경시 발생하는 비효율성을 제거 하였다. 또한, 하나의 리더와 45개의 태그를 사용하여 구현한 리더 프로토콜을 실제 능동형 RFID 시스템에 적용하여 성능을 평가 하였다.

효율적인 분산 저장 시스템을 위한 대칭 트리 복제 프로토콜 (Symmetric Tree Replication Protocol for Efficient Distributed Storage System)

  • 최성춘;윤희용;이강신;이호재
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제31권9호
    • /
    • pp.503-513
    • /
    • 2004
  • 최근 분산 컴퓨팅 환경에서 데이타와 서비스의 복제는 통신비용의 감소, 데이타 가용성 증가, 그리고 단일 서버의 병목현상을 피하기 위해 필수적이다. 기존의 대표적인 복제 프로토콜로 네트워크를 논리적으로 구성하는 Tree quorum 프로토콜과 Grid프로토콜이 있다. Tree quorum프로토콜은 최선의 경우 가장 우수한 읽기 성능을 보이는 반면 트리의 높이가 증가할수록 노드의 수가 기하급수적으로 증가한다는 단점을 가지고 있다. Grid프로토콜은 읽기 동작에 있어 높은 가용성을 가지는 반면 고장이 없는 환경에서도 같은 읽기 및 쓰기 성능을 보이는 단점을 가지고 있다. 따라서 본 논문에서는 기존의 복제 프로토콜이 가지는 문제점을 해결하고, 대칭적 트리 구조를 이용하여 노드의 장애가 발생하는 환경에서도 우수한 성능을 갖는 복제 프로토콜을 제안한다. 제안된 복제 프로토콜은 Tree quorum 프로토콜에 비해 적은 저기 비용을 가지며, 적은 수의 노드 구성 환경에서도 높은 읽기 가용성을 가진다. 또한 응답시간 면에서도 우수한 성능을 보인다.

OSPF Protocol 표준 및 구현의 대수 정형적 명세 및 정형적 검증 (Algebraic Formal Specification and Formal Validation of the Standard and an Implementation of the OSPF Protocol)

  • 박재현
    • 한국통신학회논문지
    • /
    • 제29권3B호
    • /
    • pp.360-374
    • /
    • 2004
  • OSPF 프로토콜은 가장 보편적으로 사용되고 있는 Interior Gateway Routing Protocol 이다. 그러므로, 초고속 라우터의 동작의 신뢰성 확보를 위해, OSPF 프로토콜의 상호운용성과 안전성의 보장은 중요하다. 본 논문에서는 OSPF 라우팅 프로토콜의 표준 문서를 분석하여, 프로토콜 동작들을 대수 정형 방법을 사용하여 상세 설계 수준으로 명세하고, OSPF 프로토콜의 가용한 원천코드를 참조하여, 표준에 명확하게 명세되지 않은 좀더 상세한 동작까지 표현하도록 이 명세를 보완하였다. 그리고 명세된 프로토콜 상태 기계의 상호운용성과 안전성을 정형적으로 증명하였다. 우리는 먼저 제시한 정형적 명세가 OSPF 프로토콜의 표준 문서에 나타난 모든 상태들과 모든 천이 이벤트들을 표현하고 있어, 명세된 프로토콜 상태기계가 완전성을 가지고 있다는 사실을 보이고, 또한 상호운용성을 가짐을 증명하였다. 그리고 프로토콜의 동작의 안전성을 증명하기 위해, 생존성, 그리고 라이브락 부재를 정형적으로 증명하고, 교착상태 부재 역시 정형적으로 증명하였다. 결과적으로 OSPF 프로토콜이 일관성을 가진다는 사실을 보인다. 본 명세와 검증은 기존외 OSPF Version 2의 프로토콜 메커니즘을 그대로 계승한 OSPF Version 3에서도 유효하다.

국소적 부하와 전신적 부하가 슬관절 위치 감각에 미치는 영향 (The effects of knee joint position sense following local and general load protocols)

  • 황윤태;박래준;최진호
    • The Journal of Korean Physical Therapy
    • /
    • 제17권3호
    • /
    • pp.429-440
    • /
    • 2005
  • The purpose of this study was to compare the effects of knee joint position sense following local and general load protocols in 25 healthy male subjects. Proprioception of the knee joint was evaluated by measuring absolute angular errors at matching angles before, after and between 2 different types of load protocols. Proprioception tests(on the dominant knee) were performed in which proprioception of the passivepassive reproduced and active-active reproduced knee position was measured. Local load was provided with maximum isokinetic knee extension-flexion on the isokinetic dynamometer(Cybex), and general load was 10 minutes running on a treadmill. Peak torque(knee extension and flexion) and heart rate(beats per minute) was evaluated as an indicator of local and general fatigue during load protocols. The results were as follows: 1. For pasive-pasive reproduced knee position test, significant difference in absolute angular errors after general load protocol was detected compared with that before general load protocol(P<.05), significant difference in absolute angular errors after local load protocol was detected compared with that before local load protocol(P<.05). However, no significant difference in absolute angular errors of general load protocol was detected compared with that of local load protocol (P>.05), no significant difference in absolute angular errors of local load protocol was detected compared with that of general load protocol(P>.05). 2. For active-active reproduced knee position test, significant difference in absolute angular errors after general load protocol was detected compared with that before general load protocol(P<.05), significant difference in absolute angular errors after local load protocol was detected compared with that before local load protocol (P<.05). Also, significant difference in absolute angular errors of general load protocol was detected compared with that of local load protocol(P<.05), significant difference in absolute angular errors of local load protocol was detected compared with that of general load protocol(P<.05). 3. A significant decrease of peak torque of knee extensors and flexors was seen after local load, although heart rate was significantly increased(P<.05). No significant change of peak torque of knee extensors and flexors was seen after general load(P>.05), although heart rate was also significantly increased(P<.05). The previous study revealed that knee proprioception is significantly altered when the muscle mechanoreceptors are dysfunctional due to muscle fatigue, although the joint mechanoreceptors have no significantly effect on knee proprioception when the presence of knee muscle fatigue. However, the results of this study are different from those of the previous study in that muscle weakness of the knee could not be seen after general load. This study shows that general load may diminish motor control by the central nervous system. Proprioceptional decline without muscle weakness of knee after general load suggests a change in the proprioceptional pathway without influence from muscle mechanoreceptors.

  • PDF