• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.202-209
• /
• 2015

Many of the natural dyes used for natural dyeing are difficult to maintain colorfastness due to their complex structure and specific properties. Therefore, there is a need for developing of color sustainable ability for use as an advanced coloring agent for fabrics, which would eco benign or not. In this study, the natural dye extracted from the waste of grape fruits was used to dye cotton fabric. Thus, the present study aims at extraction of color from grape seeds, skin, and stem through fermentation and then employing the same in dyeing and mordanting of cotton. Dyeing experiments were done under different conditions of fermentation and protein type mordants which were treated before and after dyeing. Experimental fabrics were used with cotton after scouring. Color value of dyed fabrics and color fastness of cotton dyed fabrics to washing and light were measured. The fastness of dyed experimental fabrics was increased by mordanting of protein fermentation and the color of dyed cotton was light red purple. The color of dyed fabric found with the optimum mordant treatment when treated with pre milk-mordant at $40^{\circ}C$ for 30min and 3% grape seed extract. On the whole, reddish tone very slightly increased with the milk pre-mordant. The color fastness of dyed cotton fabrics to light and washing was increased after fermentation.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.119-129
• /
• 2020

Unlike synthetic dyes, natural dyes do not affect the human body or create atmosphere pollution that are also mothproof, antibiotic and sterilized. This study examined the changes in dye adsorption properties according to mordant types and mordanting method to qualify trends using sage and rosemary extracts. Dyeability of sage extract is often similar to rosemary extract regardless of dyeing conditions. Dyeing properties of herb colorants on cotton, silk and wool fiber and effect of dyeing conditions on dye uptake were also compared. Dyed fabric showed a yellowish color and the dyeing affinity was somewhat good with rosemary extract. The surface color of the dyed fabrics was darkened by mordant treatment. The K/S value of herb colorants of protein fiber was higher than cellulose fiber. The concentration of mordant having the highest dyeing affinity was different from the mordant type. Regardless of the type of fiber, the K/S value of premordanting was the highest in mordanting method, and the K/S value of simultaneous mordanting indicated no noticeable mordant effect. The fastness of washing of silk fabric was reduced the most by mordant treatment. The lightfastness was reduced in Al mordant treatment regardless of the type of fiber. The lightfastness of wool increased somewhat by mordant treatment.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.462-468
• /
• 2014

This study investigates the dyeability of soybean protein fabric after dyeing with gallut. In this study, the colorants of gallnut were extracted with boiling water at $60^{\circ}C$ and 60min. Soybean protein fabric was dyed with extracted solution from gallnut according to concentration, temperature and time. After dyeing with gallut solution, dyeability (K/S) was obtained by CCM observation. Al, Cu and Fe were employed as a mordanting agents. Various color changing were produced by the interactions of mordants that were different from soybean protein fabric; however, Al mordant was not indicated as a variable color change. Fastness to washing and light were also investigated. Consequently, the dyeability of the soybean protein fabric dyed with gallut showed reasonable results at 100% o.w.f, $90^{\circ}C$, for 60min. Fastness to washing according to concentration indicated good result as more than grade (4-5) in general. Fastness to light was almost the same compared to fastness to washing at all concentrations. Fastness to washing according to mordants indicated good grade (4) in principle at Al, Cu, and Fe; in addition, fastness to light indicated a good grade too. Fastness to light also indicated the highest dyeability at Fe mordant. This study shows that gallut is a reasonable dyestuff to soybean protein fabric and that it is possible to manufacture a variety of products that use soybean protein fabric.

• Korean Journal of Human Ecology
• /
• v.11 no.4
• /
• pp.391-400
• /
• 2002

This study was intended to research the dyeing with natural walnut hull extracts over cotton, flax, rayon, wool, nylon and silk. We studied the dyeing conditions and mordant effect, and observed dyeability. The result are as follows: 1. In the dyeability with natural walnut hull extracts, protein and polyamide fiber has more dye uptake rather than cellulose fiber. 2. The optimum condition in the dyeing with natural walnut hull extracts was at $90^{\circ}C$, 12%(o.w.b) concentration in 90 mins. 3. In the case of the dyeability by repeated dyeing number, the dyeability of good dyeability fiber is improved in the first or second dyeing, but that of bad dyebality fiber is improved when it is dyed more repeatedly. 4. In the dyeablity treated with mordants, Al, Sn, and Mg don't have any differences, but Cu and Fe have some difference. The color of Fe mordant is green and the color of Cu mordant is blue. 5. In the case of the color fastness with mordant treatment, nylon is better than silk and wool in color fastness to washing but silk is better than nylon and wool in color fastness to light.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.128-140
• /
• 2016

In this study, dyeability of Urtica Dioica L. extract, which is relatively less studied, was measured. The extract of this plant was used to dye cellulose and protein fiber to check its usage as a natural green dye. Three different methods were used to produce extract. Dried Urtica Dioica L. was extracted with 100% ethanol, 50% ethanol with 50% distilled water and 100% distilled water. Then dyeing solution was obtained by blending with distilled water at 1-to-1 ratio. The maximum dyeability was obtained when 100% ethanol extract of dried Urtica Dioica L. used to dye fabrics at 60 degrees celsius for 60 minutes without mordant treatment. Cotton, rayon, wool and silk were dyed and dyeability for each fiber was measured for color difference value then compared to its control. The results show that dyeability of rayon and dyeability of wool are stronger, and that when color position for each mordant is measured, color difference is most diverse on cotton with pre-mordant treatment. Color fastness to wash, perspiration and rubbing crockmeter were superb, but color fastness to light was low, therefore, additional study on this is needed to improve. Urtica Dioica L. is now expected to be used practically as green color dye as well as medicinally and edible.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.476-484
• /
• 2014

The purpose of this study was to investigate the dyeing properties and anti-microbial ability of silk and wool fabrics dyed with Terminalia chebula Retzius(TCR) extract using two extraction solvent, hot water and methanol. Dyeing properties of fabrics were studied by investigating the characteristics of colorant, changes in dye uptake under different dyeing conditions, and by investigating color change when mordants were applied. Also, color fastness, and antimicrobial activity of dyed fabrics were estimated. Regardless of extraction solvent type, colorant showed maximum absorption wavelength at 280 nm and 578 nm, which implied that tannin was the major pigment component of TCR. Also, through FT-IR spectrum result, it was confirmed that tannin of TCR methanol extract was hydrolysable tannin. But for the hot water extract, it was only assumed that its tannin was condenced tannin. Fabric dyed with hot water solvent extract showed higher dye uptake than fabric dyed with methanol solvent extract, dye uptake increasing by higher concentration of the dye, longer dyeing time and higher dyeing temperature. And the absorption curve between TCR extract and protein fiber was shaped in the form of Langmuir adsorption isotherm. Fabric dyed without mordant was yellow in color, and when dyed with mordant, fabric showed various colors depending on mordant types except Sn. Color fastness to washing was generally fine and color fastness to light was moderate. But color fastness to rubbing and dry cleaning was outstanding. Lastly, dyed fabrics showed very good antimicrobial activity of 99.9% against Staphylococcus aureus and Kiebsiella pneumoniae.

• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.343-348
• /
• 2006

This study aims to attain gray tone dyed goods by using tannin that is contained in green tea. Tannin is given general name of polyphenol, which has a characteristic that bonds with protein and it is used for food preservative that protects against bacteria, as well as its purpose of black tone dye for silk treatment that has been processed since its early ages. In particular, as tannin reacts with all kinds of metallic mordant and changes to various colors, when tannin acid is combined with iron, it becomes tannin steel and produces gray tone color. Tannin that is contained in green tea is condensed tannins and its structure does not hydrolyze, thus having flavan type structure. In order to find the suitable condition for processing tannin, UV-Vis part absorption spectrum of green tea tannin, dye ability based on temperature and time, reflection rate based on concentration, color changes based on acid treatment and alkali treatment, changes on surface based on concentration or metal mordant condition, and lightfastness were measured. Maximum absorption wavelength (${\lambda}_{max}$) of green tea tannin was at around 273nm, while strong absorption was also observed at below 350 nm. Dye ability of green tea tannin is done more easily on silk rather than cellulose fibers such as cotton, while the optimum condition for dyeing was observed to be at $60^{\circ}C$, for 20 minutes. As a result of acid treatment, the color of dye material consisted highly of gray tones and showed overall gray tone with the combined color of yellow and red after the alkali treatment. While it was observed that as dye concentration and metal mordant concentration increased, the color changed at counter-clockwise direction on the Y-scale of Munsell's scale of colors. Additionally, lightfastness was more on a normal fading.

• Textile Coloration and Finishing
• /
• v.27 no.2
• /
• pp.142-148
• /
• 2015

The aim of this study was to investigate the possibility utilizing Metasequoia(Metasequoia glyptostroboides) cone as a new natural dye resource. Dyeing onto cotton fiber was carried out to study the effect of dyeing conditions and mordanting effect on dye uptake, color change, and colorfastness. FT-IR analysis supported that hydrolyzable tannins were contained in the extracted colorant. Metasequoia cone colorant showed low affinity to cotton fiber and maximum dye uptake was obtained at pH 3.5 showing YR Munsell color. Mordanting improved dye uptake regardless of mordant type, especially Fe($C_5H_{10}FeO_6$) mordant was effective as much as 2 times higher dye uptake comparing with un-mordanted sample. The color of dyed fabric with mordanting showed YR Munsell color except of the Fe($FeSO_4{\cdot}7H_2O$) mordanted sample showing Y Munsell color. Colorfastness to rubbing and washing was relatively good, whereas lightfastness of the dyed fabrics was above grade 3/4 except that the dyed samples with Fe mordanting showed grade 2. It is necessary to apply Metasequoia cone colorant onto other fibers, especially protein fibers, for evaluating its efficacy as a new natural dye resource.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.3
• /
• pp.336-346
• /
• 2011

Dyeing properties of protein fiber with bamboo colorants were studied by investigating the effect of dyeing conditions such as dye concentration, dyeing temperatures, times on dye uptakes, effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use. In addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were estimated. The dye uptake increased as the dyeing concentration increased. Bamboo colorants showed relatively good affinity to protein fiber and produced a yellow color. Dye uptake increased as the dyeing time and temperature increased. Post-mordanting was more effective than pre-mordanting. Mordants, Fe and N.Fe, were effective for increasing dye uptake. The color of fabric mordanted with Cu and N.Cu changed to GY. Colorfastness of dyed fabrics showed a relatively good rating, and mordanting had no significant effect on colorfastness. Dyed silk fabric showed very good antimicrobial abilities of 99.9%. Also, ultraviolet-cut ability and deodorant ability were improved in silk fabric dyed with bamboo extracts.

• Korean Journal of Human Ecology
• /
• v.19 no.4
• /
• pp.709-717
• /
• 2010

This study investigated the properties and functions of wool and silk dyed with Catechu by examining the effects of dying conditions such as dye concentration, dying temperature, dyeing time, pH level and pre-mordants. These conditions were examined in relation to dye uptake and color changes, washing fastness, light fastness, ultraviolet-cut ability and antimicrobial ability of the dyed fabrics. Catechu showed good affinity to silk fiber. Langmuir adsorption isotherm was obtained, and so it was considered that ionic bondings are formed between Catechu and protein fiber. As the dyeing time and temperature is increased, the dyeability of both silk and wool fabrics also increases. At high temperatures the color of dyed fabrics changes from Y and YR to R. Wool is effective in using Al, Cu, Fe mordant, while silk is effective only in using only Cu mordants. The dyeability was shown to be improved at low pH levels. Additionally, both washing fastness and light fastness were shown to be low. However, the fabric color gradually changed to red was due to mailard reaction of catechol tannin causingby repeated washing and sunlight. The ultraviolet-cut ability was improved for cotton fabric dyed with Catechu. Also, dyed fabric with Catechu showed very good antimicrobial abilities at 99.9%.