• International Journal of Internet, Broadcasting and Communication
• /
• 제4권1호
• /
• pp.18-22
• /
• 2012

In this paper, we propose an equivalent Wiener-Hopf equation. The proposed algorithm can obtain the weight vector of a TDL(tapped-delay-line) filter and the error simultaneously if the inputs are orthogonal to each other. The equivalent Wiener-Hopf equation was analyzed theoretically based on the MMSE(minimum mean square error) method. The results present that the proposed algorithm is equivalent to original Wiener-Hopf equation. In conclusion, our method can find the coefficient of the TDL (tapped-delay-line) filter where a lattice filter is used, and also when the process of Gram-Schmidt orthogonalization is used. Furthermore, a new cost function is suggested which may facilitate research in the adaptive signal processing area.

• 동력기계공학회지
• /
• 제15권6호
• /
• pp.95-100
• /
• 2011

In this study, an evaluation equation of energy efficiency of pneumatic driving apparatus is proposed. The evaluation equation is derived from state equation and energy equation of air in a control volume, and, the equation of motion of a moving part of a pneumatic cylinder. As a result, distribution of consumption energy and energy efficiency of pneumatic driving apparatus can be analyzed quantitatively. The effectiveness of the proposed method is proved by a pneumatic cylinder driving apparatus using a meter-out driving method.

• 항공우주시스템공학회지
• /
• 제10권1호
• /
• pp.15-20
• /
• 2016

The optimal estimation of a general continuous-discrete system can be achieved through the solution of the Fokker-Planck equation and the Bayesian update. Due the high nonlinearity of the equation of motion of the system and the measurement model, it is necessary to linearize the both equation. To avoid linearization, the filter based on Fokker-Planck equation is designed. with the unscented transformation update mechanism, in which the associated Fokker-Planck equation was solved efficiently and accurately via discrete quadrature and the measurement update was done through the unscented transformation update mechanism. This filter based on the Direct Quadrature Moment of Method(DQMOM) and the unscented transformation update is applied to the bearing only target tracking problem. The proposed filter can still provide more accurate estimation of the state than those of the extended Kalman filter especially when measurements are sparse. Simulation results indicate that the advantages of the proposed filter based on the DQMOM and the unscented transformation update make it a promising alternative to the extended Kalman filter.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.42-54
• /
• 2009

The wind load equation for the design of electric power facilities such as electrical pole in railroad is based on the maximum wind velocity without considering regional difference in wind velocities. Also, the use of a different equation to highspeed railroad and the possibility of higher wind speed due to climate change claims a new design equation. In this paper, a wind load equation based on wind speed measurement data to date, which is applicable to both conventional and highspeed railroad is proposed. The proposed equation considers the regional differences in wind speed for economic and effective design, and the possibility of higher wind speed due to climate change.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.6-7
• /
• 2006

Based on theoretical analysis, a new general equation of mean particle size applicable to both conventional atomization methods and new atomization processes is presented. In gas atomization, it is equivalent with and can be changed into Lubanska Equation. In centrifugal atomization, it can be changed into the equations that are currently the most widely used. In water atomization, it is similar to the equation proposed by Grandzol and Tallmadge. According to the universal equation, new correlations for mean particle size in novel atomization processes such as Hybrid Atomization and Multistage Atomization were proposed and agreed with our experimental data well.

• 콘크리트학회지
• /
• 제10권6호
• /
• pp.233-240
• /
• 1998

구조역학에 기초한 보의 종방향 휨모멘트변화율과 전단력의 관계와 본 연구자가 이전에 발표한 아취모델을 이용하여 복부보강이 안된 철근콘크리트 보의 전단강도 예측식을 제안하였다. 이론적으로 유도된 본 연구의 전단강도식은 주로 실험결과에 기초한 ACI 318 전단강도식과 비슷한 형태이다. 본 연구에서 제안한 식은 콘크리트 압축강도, 주인장철근비 및 전단지간대 유효높이의 비가 주변수이며, 보작용과 아취작용의 조합에 의한 철근콘크리트 보의 전단저항메카니즘이 합리적으로 반영되어 있다. 본 연구에서 제안한 전단강도식은 ACI 318 전단강도식 및 Zsutty의 전단강도식과 함께 기존의 실험결과와 비교되었다.

• Journal of information and communication convergence engineering
• /
• 제9권5호
• /
• pp.500-504
• /
• 2011

In this paper, we propose an equivalent Wiener-Hopf equation. The proposed algorithm can obtain the weight vector of a TDL(tapped-delay-line) filter and the error simultaneously if the inputs are orthogonal to each other. The equivalent Wiener-Hopf equation was analyzed theoretically based on the MMSE(minimum mean square error) method. The results present that the proposed algorithm is equivalent to original Wiener-Hopf equation. The new algorithm was applied into the identification of an unknown system for evaluating the performance of the proposed method. We compared the Wiener-Hopf solution with the equivalent Wiener-Hopf solution. The simulation results were similar to those obtained in the theoretical analysis. In conclusion, our method can find the coefficient of the TDL (tapped-delay-line) filter where a lattice filter is used, and also when the process of Gram-Schmidt orthogonalization is used. Furthermore, a new cost function is suggested which may facilitate research in the adaptive signal processing area.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.709-714
• /
• 2000

A splitting method for the direct numerical simulation of solid-liquid mixtures is presented, where a symmetric pressure equation is newly proposed. Through numerical experiment, it is found that the newly proposed splitting method works well with a matrix-free formulation fer some bench mark problems avoiding an erroneous pressure field which appears when using the conventional pressure equation of a splitting method. When deriving a typical pressure equation of a splitting method, the motion of a solid particle has to be approximated by the 'intermediate velocity' instead of treating it as unknowns since it is necessary as a boundary condition. Therefore, the motion of a solid particle is treated in such an explicit way that a particle moves by the known form drag (pressure drag) that is calculated from the pressure equation in the previous step. From the numerical experiment, it was shown that this method gives an erroneous pressure field even for the very small time step size as a particle velocity increases. In this paper, coupling the unknowns of particle velocities in the pressure equation is proposed, where the resulting matrix is reduced to the symmetric one by applying the projector of the combined formulation. It has been tested over some bench mark problems and gives reasonable pressure fields.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.296-302
• /
• 2010

This paper proposes an approximate equation for broad bandwidth conditions in an antenna feeding probe design with a cylindrical magneto material structure (CMMS). The bandwidth calculation has been conducted according to the relation between the distance ($r_m$) between the magneto material and feeding probe, and the magneto material thickness ($t_m$) for a given ${\mu}_r$. The bandwidth of a proposed antenna with CMM feeding structure is improved about 182 %, when ${\mu}_r=20+j0.001$, in comparison with the bandwidth of an antenna without CMMS. The maximum error extent between the bandwidth calculated by the approximation equation and by the numerical calculation of the proposed antenna is about $\pm$3.2 % for ${\mu}_r=10+j0.001$. The approximation equation proposed in this study can solve the conventional problem of the complex process and the long time required for reiterative calculation, and allow simple and precise design with prediction. The accuracy of an approximated equation is compared with the results calculated by a commercial tool and verified by reasonable agreement between them.

• 방사성폐기물학회지
• /
• 제16권2호
• /
• pp.211-221
• /
• 2018

중성자 확산방정식에 대해 개발된 노달 확산이론을 단순 우성 중성자 수송방정식에 적용할 수 있는 노달 수송이론을 제시한다. 노달이론으로 다항식전개 노달법과 해석함수전개 노달법을 채택하였고 단순 우성 수송방정식은 수송방정식에 대한 합리적 근사이며 기존의 노달해법이 방향 차분된 단순 우성 수송방정식에 정확히 적용될 수 있음을 수치적으로 확인하였다. 본 연구에서는 방법론 개발이 목적이므로 노드 당 최소한의 미지수를 정의하여 사용했지만 미지수를 추가함으로써 정확도를 증가시킬 수 있음은 기존의 노달 확산이론의 경우와 같다. 즉 중성자 수송방정식에 대해 노달이론을 적용하여 소격격자에 대해 계산 정확성이 확보되고 이는 결국 계산 효율성 증대로 나타난다.